From fda262b8978d0089758ef9444508434c74113a61 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Thu, 27 Oct 2005 20:20:42 +1000 Subject: [PATCH] [PATCH] ppc64: remove arch/ppc64/kernel/setup.c and use setup_64.c from the merged tree instead. The only difference between them was the code to set up the syscall maps. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 5 +- arch/powerpc/kernel/setup_64.c | 18 +- arch/ppc64/kernel/Makefile | 2 +- arch/ppc64/kernel/setup.c | 1307 -------------------------------- 4 files changed, 17 insertions(+), 1315 deletions(-) delete mode 100644 arch/ppc64/kernel/setup.c diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 30101762f7c..a733347964a 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -12,7 +12,8 @@ endif obj-y := semaphore.o cputable.o ptrace.o syscalls.o \ signal_32.o pmc.o -obj-$(CONFIG_PPC64) += binfmt_elf32.o sys_ppc32.o ptrace32.o +obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \ + ptrace32.o obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o obj-$(CONFIG_POWER4) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o @@ -34,7 +35,7 @@ extra-y += vmlinux.lds obj-y += process.o init_task.o time.o \ prom.o systbl.o traps.o setup-common.o obj-$(CONFIG_PPC32) += entry_32.o idle_6xx.o setup_32.o misc_32.o -obj-$(CONFIG_PPC64) += setup_64.o misc_64.o +obj-$(CONFIG_PPC64) += misc_64.o obj-$(CONFIG_PPC_OF) += prom_init.o obj-$(CONFIG_MODULES) += ppc_ksyms.o obj-$(CONFIG_BOOTX_TEXT) += btext.o diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 9cdf294e76f..721adeea601 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -702,6 +702,17 @@ static void __init emergency_stack_init(void) limit)) + PAGE_SIZE; } +extern unsigned long *sys_call_table; +extern unsigned long sys_ni_syscall; +#ifdef CONFIG_PPC_MERGE +#define SYS_CALL_ENTRY64(i) sys_call_table[(i) * 2] +#define SYS_CALL_ENTRY32(i) sys_call_table[(i) * 2 + 1] +#else +extern unsigned long *sys_call_table32; +#define SYS_CALL_ENTRY64(i) sys_call_table[(i)] +#define SYS_CALL_ENTRY32(i) sys_call_table32[(i)] +#endif + /* * Called from setup_arch to initialize the bitmap of available * syscalls in the systemcfg page @@ -709,17 +720,14 @@ static void __init emergency_stack_init(void) void __init setup_syscall_map(void) { unsigned int i, count64 = 0, count32 = 0; - extern unsigned long *sys_call_table; - extern unsigned long sys_ni_syscall; - for (i = 0; i < __NR_syscalls; i++) { - if (sys_call_table[i*2] != sys_ni_syscall) { + if (SYS_CALL_ENTRY64(i) != sys_ni_syscall) { count64++; systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f); } - if (sys_call_table[i*2+1] != sys_ni_syscall) { + if (SYS_CALL_ENTRY32(i) != sys_ni_syscall) { count32++; systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f); diff --git a/arch/ppc64/kernel/Makefile b/arch/ppc64/kernel/Makefile index 83ecefdcfef..f2f60c9cc55 100644 --- a/arch/ppc64/kernel/Makefile +++ b/arch/ppc64/kernel/Makefile @@ -7,7 +7,7 @@ ifneq ($(CONFIG_PPC_MERGE),y) EXTRA_CFLAGS += -mno-minimal-toc extra-y := head.o vmlinux.lds -obj-y := setup.o entry.o misc.o prom.o +obj-y := entry.o misc.o prom.o endif diff --git a/arch/ppc64/kernel/setup.c b/arch/ppc64/kernel/setup.c deleted file mode 100644 index 44ee6ebe9a6..00000000000 --- a/arch/ppc64/kernel/setup.c +++ /dev/null @@ -1,1307 +0,0 @@ -/* - * - * Common boot and setup code. - * - * Copyright (C) 2001 PPC64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -/* - * Here are some early debugging facilities. You can enable one - * but your kernel will not boot on anything else if you do so - */ - -/* This one is for use on LPAR machines that support an HVC console - * on vterm 0 - */ -extern void udbg_init_debug_lpar(void); -/* This one is for use on Apple G5 machines - */ -extern void udbg_init_pmac_realmode(void); -/* That's RTAS panel debug */ -extern void call_rtas_display_status_delay(unsigned char c); -/* Here's maple real mode debug */ -extern void udbg_init_maple_realmode(void); - -#define EARLY_DEBUG_INIT() do {} while(0) - -#if 0 -#define EARLY_DEBUG_INIT() udbg_init_debug_lpar() -#define EARLY_DEBUG_INIT() udbg_init_maple_realmode() -#define EARLY_DEBUG_INIT() udbg_init_pmac_realmode() -#define EARLY_DEBUG_INIT() \ - do { udbg_putc = call_rtas_display_status_delay; } while(0) -#endif - -/* extern void *stab; */ -extern unsigned long klimit; - -extern void mm_init_ppc64(void); -extern void stab_initialize(unsigned long stab); -extern void htab_initialize(void); -extern void early_init_devtree(void *flat_dt); -extern void unflatten_device_tree(void); - -extern void smp_release_cpus(void); - -int have_of = 1; -int boot_cpuid = 0; -int boot_cpuid_phys = 0; -dev_t boot_dev; -u64 ppc64_pft_size; - -struct ppc64_caches ppc64_caches; -EXPORT_SYMBOL_GPL(ppc64_caches); - -/* - * These are used in binfmt_elf.c to put aux entries on the stack - * for each elf executable being started. - */ -int dcache_bsize; -int icache_bsize; -int ucache_bsize; - -/* The main machine-dep calls structure - */ -struct machdep_calls ppc_md; -EXPORT_SYMBOL(ppc_md); - -#ifdef CONFIG_MAGIC_SYSRQ -unsigned long SYSRQ_KEY; -#endif /* CONFIG_MAGIC_SYSRQ */ - - -static int ppc64_panic_event(struct notifier_block *, unsigned long, void *); -static struct notifier_block ppc64_panic_block = { - .notifier_call = ppc64_panic_event, - .priority = INT_MIN /* may not return; must be done last */ -}; - -/* - * Perhaps we can put the pmac screen_info[] here - * on pmac as well so we don't need the ifdef's. - * Until we get multiple-console support in here - * that is. -- Cort - * Maybe tie it to serial consoles, since this is really what - * these processors use on existing boards. -- Dan - */ -struct screen_info screen_info = { - .orig_x = 0, - .orig_y = 25, - .orig_video_cols = 80, - .orig_video_lines = 25, - .orig_video_isVGA = 1, - .orig_video_points = 16 -}; - -#ifdef CONFIG_SMP - -static int smt_enabled_cmdline; - -/* Look for ibm,smt-enabled OF option */ -static void check_smt_enabled(void) -{ - struct device_node *dn; - char *smt_option; - - /* Allow the command line to overrule the OF option */ - if (smt_enabled_cmdline) - return; - - dn = of_find_node_by_path("/options"); - - if (dn) { - smt_option = (char *)get_property(dn, "ibm,smt-enabled", NULL); - - if (smt_option) { - if (!strcmp(smt_option, "on")) - smt_enabled_at_boot = 1; - else if (!strcmp(smt_option, "off")) - smt_enabled_at_boot = 0; - } - } -} - -/* Look for smt-enabled= cmdline option */ -static int __init early_smt_enabled(char *p) -{ - smt_enabled_cmdline = 1; - - if (!p) - return 0; - - if (!strcmp(p, "on") || !strcmp(p, "1")) - smt_enabled_at_boot = 1; - else if (!strcmp(p, "off") || !strcmp(p, "0")) - smt_enabled_at_boot = 0; - - return 0; -} -early_param("smt-enabled", early_smt_enabled); - -/** - * setup_cpu_maps - initialize the following cpu maps: - * cpu_possible_map - * cpu_present_map - * cpu_sibling_map - * - * Having the possible map set up early allows us to restrict allocations - * of things like irqstacks to num_possible_cpus() rather than NR_CPUS. - * - * We do not initialize the online map here; cpus set their own bits in - * cpu_online_map as they come up. - * - * This function is valid only for Open Firmware systems. finish_device_tree - * must be called before using this. - * - * While we're here, we may as well set the "physical" cpu ids in the paca. - */ -static void __init setup_cpu_maps(void) -{ - struct device_node *dn = NULL; - int cpu = 0; - int swap_cpuid = 0; - - check_smt_enabled(); - - while ((dn = of_find_node_by_type(dn, "cpu")) && cpu < NR_CPUS) { - u32 *intserv; - int j, len = sizeof(u32), nthreads; - - intserv = (u32 *)get_property(dn, "ibm,ppc-interrupt-server#s", - &len); - if (!intserv) - intserv = (u32 *)get_property(dn, "reg", NULL); - - nthreads = len / sizeof(u32); - - for (j = 0; j < nthreads && cpu < NR_CPUS; j++) { - cpu_set(cpu, cpu_present_map); - set_hard_smp_processor_id(cpu, intserv[j]); - - if (intserv[j] == boot_cpuid_phys) - swap_cpuid = cpu; - cpu_set(cpu, cpu_possible_map); - cpu++; - } - } - - /* Swap CPU id 0 with boot_cpuid_phys, so we can always assume that - * boot cpu is logical 0. - */ - if (boot_cpuid_phys != get_hard_smp_processor_id(0)) { - u32 tmp; - tmp = get_hard_smp_processor_id(0); - set_hard_smp_processor_id(0, boot_cpuid_phys); - set_hard_smp_processor_id(swap_cpuid, tmp); - } - - /* - * On pSeries LPAR, we need to know how many cpus - * could possibly be added to this partition. - */ - if (systemcfg->platform == PLATFORM_PSERIES_LPAR && - (dn = of_find_node_by_path("/rtas"))) { - int num_addr_cell, num_size_cell, maxcpus; - unsigned int *ireg; - - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); - - ireg = (unsigned int *) - get_property(dn, "ibm,lrdr-capacity", NULL); - - if (!ireg) - goto out; - - maxcpus = ireg[num_addr_cell + num_size_cell]; - - /* Double maxcpus for processors which have SMT capability */ - if (cpu_has_feature(CPU_FTR_SMT)) - maxcpus *= 2; - - if (maxcpus > NR_CPUS) { - printk(KERN_WARNING - "Partition configured for %d cpus, " - "operating system maximum is %d.\n", - maxcpus, NR_CPUS); - maxcpus = NR_CPUS; - } else - printk(KERN_INFO "Partition configured for %d cpus.\n", - maxcpus); - - for (cpu = 0; cpu < maxcpus; cpu++) - cpu_set(cpu, cpu_possible_map); - out: - of_node_put(dn); - } - - /* - * Do the sibling map; assume only two threads per processor. - */ - for_each_cpu(cpu) { - cpu_set(cpu, cpu_sibling_map[cpu]); - if (cpu_has_feature(CPU_FTR_SMT)) - cpu_set(cpu ^ 0x1, cpu_sibling_map[cpu]); - } - - systemcfg->processorCount = num_present_cpus(); -} -#endif /* CONFIG_SMP */ - -extern struct machdep_calls pSeries_md; -extern struct machdep_calls pmac_md; -extern struct machdep_calls maple_md; -extern struct machdep_calls bpa_md; -extern struct machdep_calls iseries_md; - -/* Ultimately, stuff them in an elf section like initcalls... */ -static struct machdep_calls __initdata *machines[] = { -#ifdef CONFIG_PPC_PSERIES - &pSeries_md, -#endif /* CONFIG_PPC_PSERIES */ -#ifdef CONFIG_PPC_PMAC - &pmac_md, -#endif /* CONFIG_PPC_PMAC */ -#ifdef CONFIG_PPC_MAPLE - &maple_md, -#endif /* CONFIG_PPC_MAPLE */ -#ifdef CONFIG_PPC_BPA - &bpa_md, -#endif -#ifdef CONFIG_PPC_ISERIES - &iseries_md, -#endif - NULL -}; - -/* - * Early initialization entry point. This is called by head.S - * with MMU translation disabled. We rely on the "feature" of - * the CPU that ignores the top 2 bits of the address in real - * mode so we can access kernel globals normally provided we - * only toy with things in the RMO region. From here, we do - * some early parsing of the device-tree to setup out LMB - * data structures, and allocate & initialize the hash table - * and segment tables so we can start running with translation - * enabled. - * - * It is this function which will call the probe() callback of - * the various platform types and copy the matching one to the - * global ppc_md structure. Your platform can eventually do - * some very early initializations from the probe() routine, but - * this is not recommended, be very careful as, for example, the - * device-tree is not accessible via normal means at this point. - */ - -void __init early_setup(unsigned long dt_ptr) -{ - struct paca_struct *lpaca = get_paca(); - static struct machdep_calls **mach; - - /* - * Enable early debugging if any specified (see top of - * this file) - */ - EARLY_DEBUG_INIT(); - - DBG(" -> early_setup()\n"); - - /* - * Fill the default DBG level (do we want to keep - * that old mecanism around forever ?) - */ - ppcdbg_initialize(); - - /* - * Do early initializations using the flattened device - * tree, like retreiving the physical memory map or - * calculating/retreiving the hash table size - */ - early_init_devtree(__va(dt_ptr)); - - /* - * Iterate all ppc_md structures until we find the proper - * one for the current machine type - */ - DBG("Probing machine type for platform %x...\n", - systemcfg->platform); - - for (mach = machines; *mach; mach++) { - if ((*mach)->probe(systemcfg->platform)) - break; - } - /* What can we do if we didn't find ? */ - if (*mach == NULL) { - DBG("No suitable machine found !\n"); - for (;;); - } - ppc_md = **mach; - - DBG("Found, Initializing memory management...\n"); - - /* - * Initialize stab / SLB management - */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - stab_initialize(lpaca->stab_real); - - /* - * Initialize the MMU Hash table and create the linear mapping - * of memory - */ - htab_initialize(); - - DBG(" <- early_setup()\n"); -} - - -/* - * Initialize some remaining members of the ppc64_caches and systemcfg structures - * (at least until we get rid of them completely). This is mostly some - * cache informations about the CPU that will be used by cache flush - * routines and/or provided to userland - */ -static void __init initialize_cache_info(void) -{ - struct device_node *np; - unsigned long num_cpus = 0; - - DBG(" -> initialize_cache_info()\n"); - - for (np = NULL; (np = of_find_node_by_type(np, "cpu"));) { - num_cpus += 1; - - /* We're assuming *all* of the CPUs have the same - * d-cache and i-cache sizes... -Peter - */ - - if ( num_cpus == 1 ) { - u32 *sizep, *lsizep; - u32 size, lsize; - const char *dc, *ic; - - /* Then read cache informations */ - if (systemcfg->platform == PLATFORM_POWERMAC) { - dc = "d-cache-block-size"; - ic = "i-cache-block-size"; - } else { - dc = "d-cache-line-size"; - ic = "i-cache-line-size"; - } - - size = 0; - lsize = cur_cpu_spec->dcache_bsize; - sizep = (u32 *)get_property(np, "d-cache-size", NULL); - if (sizep != NULL) - size = *sizep; - lsizep = (u32 *) get_property(np, dc, NULL); - if (lsizep != NULL) - lsize = *lsizep; - if (sizep == 0 || lsizep == 0) - DBG("Argh, can't find dcache properties ! " - "sizep: %p, lsizep: %p\n", sizep, lsizep); - - systemcfg->dcache_size = ppc64_caches.dsize = size; - systemcfg->dcache_line_size = - ppc64_caches.dline_size = lsize; - ppc64_caches.log_dline_size = __ilog2(lsize); - ppc64_caches.dlines_per_page = PAGE_SIZE / lsize; - - size = 0; - lsize = cur_cpu_spec->icache_bsize; - sizep = (u32 *)get_property(np, "i-cache-size", NULL); - if (sizep != NULL) - size = *sizep; - lsizep = (u32 *)get_property(np, ic, NULL); - if (lsizep != NULL) - lsize = *lsizep; - if (sizep == 0 || lsizep == 0) - DBG("Argh, can't find icache properties ! " - "sizep: %p, lsizep: %p\n", sizep, lsizep); - - systemcfg->icache_size = ppc64_caches.isize = size; - systemcfg->icache_line_size = - ppc64_caches.iline_size = lsize; - ppc64_caches.log_iline_size = __ilog2(lsize); - ppc64_caches.ilines_per_page = PAGE_SIZE / lsize; - } - } - - /* Add an eye catcher and the systemcfg layout version number */ - strcpy(systemcfg->eye_catcher, "SYSTEMCFG:PPC64"); - systemcfg->version.major = SYSTEMCFG_MAJOR; - systemcfg->version.minor = SYSTEMCFG_MINOR; - systemcfg->processor = mfspr(SPRN_PVR); - - DBG(" <- initialize_cache_info()\n"); -} - -static void __init check_for_initrd(void) -{ -#ifdef CONFIG_BLK_DEV_INITRD - u64 *prop; - - DBG(" -> check_for_initrd()\n"); - - if (of_chosen) { - prop = (u64 *)get_property(of_chosen, - "linux,initrd-start", NULL); - if (prop != NULL) { - initrd_start = (unsigned long)__va(*prop); - prop = (u64 *)get_property(of_chosen, - "linux,initrd-end", NULL); - if (prop != NULL) { - initrd_end = (unsigned long)__va(*prop); - initrd_below_start_ok = 1; - } else - initrd_start = 0; - } - } - - /* If we were passed an initrd, set the ROOT_DEV properly if the values - * look sensible. If not, clear initrd reference. - */ - if (initrd_start >= KERNELBASE && initrd_end >= KERNELBASE && - initrd_end > initrd_start) - ROOT_DEV = Root_RAM0; - else - initrd_start = initrd_end = 0; - - if (initrd_start) - printk("Found initrd at 0x%lx:0x%lx\n", initrd_start, initrd_end); - - DBG(" <- check_for_initrd()\n"); -#endif /* CONFIG_BLK_DEV_INITRD */ -} - -/* - * Do some initial setup of the system. The parameters are those which - * were passed in from the bootloader. - */ -void __init setup_system(void) -{ - DBG(" -> setup_system()\n"); - - /* - * Unflatten the device-tree passed by prom_init or kexec - */ - unflatten_device_tree(); - - /* - * Fill the ppc64_caches & systemcfg structures with informations - * retreived from the device-tree. Need to be called before - * finish_device_tree() since the later requires some of the - * informations filled up here to properly parse the interrupt - * tree. - * It also sets up the cache line sizes which allows to call - * routines like flush_icache_range (used by the hash init - * later on). - */ - initialize_cache_info(); - -#ifdef CONFIG_PPC_RTAS - /* - * Initialize RTAS if available - */ - rtas_initialize(); -#endif /* CONFIG_PPC_RTAS */ - - /* - * Check if we have an initrd provided via the device-tree - */ - check_for_initrd(); - - /* - * Do some platform specific early initializations, that includes - * setting up the hash table pointers. It also sets up some interrupt-mapping - * related options that will be used by finish_device_tree() - */ - ppc_md.init_early(); - - /* - * "Finish" the device-tree, that is do the actual parsing of - * some of the properties like the interrupt map - */ - finish_device_tree(); - -#ifdef CONFIG_BOOTX_TEXT - init_boot_display(); -#endif - - /* - * Initialize xmon - */ -#ifdef CONFIG_XMON_DEFAULT - xmon_init(1); -#endif - /* - * Register early console - */ - register_early_udbg_console(); - - /* Save unparsed command line copy for /proc/cmdline */ - strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE); - - parse_early_param(); - -#ifdef CONFIG_SMP - /* - * iSeries has already initialized the cpu maps at this point. - */ - setup_cpu_maps(); - - /* Release secondary cpus out of their spinloops at 0x60 now that - * we can map physical -> logical CPU ids - */ - smp_release_cpus(); -#endif - - printk("Starting Linux PPC64 %s\n", system_utsname.version); - - printk("-----------------------------------------------------\n"); - printk("ppc64_pft_size = 0x%lx\n", ppc64_pft_size); - printk("ppc64_debug_switch = 0x%lx\n", ppc64_debug_switch); - printk("ppc64_interrupt_controller = 0x%ld\n", ppc64_interrupt_controller); - printk("systemcfg = 0x%p\n", systemcfg); - printk("systemcfg->platform = 0x%x\n", systemcfg->platform); - printk("systemcfg->processorCount = 0x%lx\n", systemcfg->processorCount); - printk("systemcfg->physicalMemorySize = 0x%lx\n", systemcfg->physicalMemorySize); - printk("ppc64_caches.dcache_line_size = 0x%x\n", - ppc64_caches.dline_size); - printk("ppc64_caches.icache_line_size = 0x%x\n", - ppc64_caches.iline_size); - printk("htab_address = 0x%p\n", htab_address); - printk("htab_hash_mask = 0x%lx\n", htab_hash_mask); - printk("-----------------------------------------------------\n"); - - mm_init_ppc64(); - - DBG(" <- setup_system()\n"); -} - -/* also used by kexec */ -void machine_shutdown(void) -{ - if (ppc_md.nvram_sync) - ppc_md.nvram_sync(); -} - -void machine_restart(char *cmd) -{ - machine_shutdown(); - ppc_md.restart(cmd); -#ifdef CONFIG_SMP - smp_send_stop(); -#endif - printk(KERN_EMERG "System Halted, OK to turn off power\n"); - local_irq_disable(); - while (1) ; -} - -void machine_power_off(void) -{ - machine_shutdown(); - ppc_md.power_off(); -#ifdef CONFIG_SMP - smp_send_stop(); -#endif - printk(KERN_EMERG "System Halted, OK to turn off power\n"); - local_irq_disable(); - while (1) ; -} -/* Used by the G5 thermal driver */ -EXPORT_SYMBOL_GPL(machine_power_off); - -void machine_halt(void) -{ - machine_shutdown(); - ppc_md.halt(); -#ifdef CONFIG_SMP - smp_send_stop(); -#endif - printk(KERN_EMERG "System Halted, OK to turn off power\n"); - local_irq_disable(); - while (1) ; -} - -static int ppc64_panic_event(struct notifier_block *this, - unsigned long event, void *ptr) -{ - ppc_md.panic((char *)ptr); /* May not return */ - return NOTIFY_DONE; -} - - -#ifdef CONFIG_SMP -DEFINE_PER_CPU(unsigned int, pvr); -#endif - -static int show_cpuinfo(struct seq_file *m, void *v) -{ - unsigned long cpu_id = (unsigned long)v - 1; - unsigned int pvr; - unsigned short maj; - unsigned short min; - - if (cpu_id == NR_CPUS) { - seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq); - - if (ppc_md.show_cpuinfo != NULL) - ppc_md.show_cpuinfo(m); - - return 0; - } - - /* We only show online cpus: disable preempt (overzealous, I - * knew) to prevent cpu going down. */ - preempt_disable(); - if (!cpu_online(cpu_id)) { - preempt_enable(); - return 0; - } - -#ifdef CONFIG_SMP - pvr = per_cpu(pvr, cpu_id); -#else - pvr = mfspr(SPRN_PVR); -#endif - maj = (pvr >> 8) & 0xFF; - min = pvr & 0xFF; - - seq_printf(m, "processor\t: %lu\n", cpu_id); - seq_printf(m, "cpu\t\t: "); - - if (cur_cpu_spec->pvr_mask) - seq_printf(m, "%s", cur_cpu_spec->cpu_name); - else - seq_printf(m, "unknown (%08x)", pvr); - -#ifdef CONFIG_ALTIVEC - if (cpu_has_feature(CPU_FTR_ALTIVEC)) - seq_printf(m, ", altivec supported"); -#endif /* CONFIG_ALTIVEC */ - - seq_printf(m, "\n"); - - /* - * Assume here that all clock rates are the same in a - * smp system. -- Cort - */ - seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000, - ppc_proc_freq % 1000000); - - seq_printf(m, "revision\t: %hd.%hd\n\n", maj, min); - - preempt_enable(); - return 0; -} - -static void *c_start(struct seq_file *m, loff_t *pos) -{ - return *pos <= NR_CPUS ? (void *)((*pos)+1) : NULL; -} -static void *c_next(struct seq_file *m, void *v, loff_t *pos) -{ - ++*pos; - return c_start(m, pos); -} -static void c_stop(struct seq_file *m, void *v) -{ -} -struct seq_operations cpuinfo_op = { - .start =c_start, - .next = c_next, - .stop = c_stop, - .show = show_cpuinfo, -}; - -/* - * These three variables are used to save values passed to us by prom_init() - * via the device tree. The TCE variables are needed because with a memory_limit - * in force we may need to explicitly map the TCE are at the top of RAM. - */ -unsigned long memory_limit; -unsigned long tce_alloc_start; -unsigned long tce_alloc_end; - -#ifdef CONFIG_PPC_ISERIES -/* - * On iSeries we just parse the mem=X option from the command line. - * On pSeries it's a bit more complicated, see prom_init_mem() - */ -static int __init early_parsemem(char *p) -{ - if (!p) - return 0; - - memory_limit = ALIGN(memparse(p, &p), PAGE_SIZE); - - return 0; -} -early_param("mem", early_parsemem); -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_MULTIPLATFORM -static int __init set_preferred_console(void) -{ - struct device_node *prom_stdout = NULL; - char *name; - u32 *spd; - int offset = 0; - - DBG(" -> set_preferred_console()\n"); - - /* The user has requested a console so this is already set up. */ - if (strstr(saved_command_line, "console=")) { - DBG(" console was specified !\n"); - return -EBUSY; - } - - if (!of_chosen) { - DBG(" of_chosen is NULL !\n"); - return -ENODEV; - } - /* We are getting a weird phandle from OF ... */ - /* ... So use the full path instead */ - name = (char *)get_property(of_chosen, "linux,stdout-path", NULL); - if (name == NULL) { - DBG(" no linux,stdout-path !\n"); - return -ENODEV; - } - prom_stdout = of_find_node_by_path(name); - if (!prom_stdout) { - DBG(" can't find stdout package %s !\n", name); - return -ENODEV; - } - DBG("stdout is %s\n", prom_stdout->full_name); - - name = (char *)get_property(prom_stdout, "name", NULL); - if (!name) { - DBG(" stdout package has no name !\n"); - goto not_found; - } - spd = (u32 *)get_property(prom_stdout, "current-speed", NULL); - - if (0) - ; -#ifdef CONFIG_SERIAL_8250_CONSOLE - else if (strcmp(name, "serial") == 0) { - int i; - u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i); - if (i > 8) { - switch (reg[1]) { - case 0x3f8: - offset = 0; - break; - case 0x2f8: - offset = 1; - break; - case 0x898: - offset = 2; - break; - case 0x890: - offset = 3; - break; - default: - /* We dont recognise the serial port */ - goto not_found; - } - } - } -#endif /* CONFIG_SERIAL_8250_CONSOLE */ -#ifdef CONFIG_PPC_PSERIES - else if (strcmp(name, "vty") == 0) { - u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL); - char *compat = (char *)get_property(prom_stdout, "compatible", NULL); - - if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) { - /* Host Virtual Serial Interface */ - int offset; - switch (reg[0]) { - case 0x30000000: - offset = 0; - break; - case 0x30000001: - offset = 1; - break; - default: - goto not_found; - } - of_node_put(prom_stdout); - DBG("Found hvsi console at offset %d\n", offset); - return add_preferred_console("hvsi", offset, NULL); - } else { - /* pSeries LPAR virtual console */ - of_node_put(prom_stdout); - DBG("Found hvc console\n"); - return add_preferred_console("hvc", 0, NULL); - } - } -#endif /* CONFIG_PPC_PSERIES */ -#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE - else if (strcmp(name, "ch-a") == 0) - offset = 0; - else if (strcmp(name, "ch-b") == 0) - offset = 1; -#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */ - else - goto not_found; - of_node_put(prom_stdout); - - DBG("Found serial console at ttyS%d\n", offset); - - if (spd) { - static char __initdata opt[16]; - sprintf(opt, "%d", *spd); - return add_preferred_console("ttyS", offset, opt); - } else - return add_preferred_console("ttyS", offset, NULL); - - not_found: - DBG("No preferred console found !\n"); - of_node_put(prom_stdout); - return -ENODEV; -} -console_initcall(set_preferred_console); -#endif /* CONFIG_PPC_MULTIPLATFORM */ - -#ifdef CONFIG_IRQSTACKS -static void __init irqstack_early_init(void) -{ - unsigned int i; - - /* - * interrupt stacks must be under 256MB, we cannot afford to take - * SLB misses on them. - */ - for_each_cpu(i) { - softirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE, - THREAD_SIZE, 0x10000000)); - hardirq_ctx[i] = (struct thread_info *)__va(lmb_alloc_base(THREAD_SIZE, - THREAD_SIZE, 0x10000000)); - } -} -#else -#define irqstack_early_init() -#endif - -/* - * Stack space used when we detect a bad kernel stack pointer, and - * early in SMP boots before relocation is enabled. - */ -static void __init emergency_stack_init(void) -{ - unsigned long limit; - unsigned int i; - - /* - * Emergency stacks must be under 256MB, we cannot afford to take - * SLB misses on them. The ABI also requires them to be 128-byte - * aligned. - * - * Since we use these as temporary stacks during secondary CPU - * bringup, we need to get at them in real mode. This means they - * must also be within the RMO region. - */ - limit = min(0x10000000UL, lmb.rmo_size); - - for_each_cpu(i) - paca[i].emergency_sp = __va(lmb_alloc_base(PAGE_SIZE, 128, - limit)) + PAGE_SIZE; -} - -/* - * Called from setup_arch to initialize the bitmap of available - * syscalls in the systemcfg page - */ -void __init setup_syscall_map(void) -{ - unsigned int i, count64 = 0, count32 = 0; - extern unsigned long *sys_call_table; - extern unsigned long *sys_call_table32; - extern unsigned long sys_ni_syscall; - - - for (i = 0; i < __NR_syscalls; i++) { - if (sys_call_table[i] == sys_ni_syscall) - continue; - count64++; - systemcfg->syscall_map_64[i >> 5] |= 0x80000000UL >> (i & 0x1f); - } - for (i = 0; i < __NR_syscalls; i++) { - if (sys_call_table32[i] == sys_ni_syscall) - continue; - count32++; - systemcfg->syscall_map_32[i >> 5] |= 0x80000000UL >> (i & 0x1f); - } - printk(KERN_INFO "Syscall map setup, %d 32 bits and %d 64 bits syscalls\n", - count32, count64); -} - -/* - * Called into from start_kernel, after lock_kernel has been called. - * Initializes bootmem, which is unsed to manage page allocation until - * mem_init is called. - */ -void __init setup_arch(char **cmdline_p) -{ - extern void do_init_bootmem(void); - - ppc64_boot_msg(0x12, "Setup Arch"); - - *cmdline_p = cmd_line; - - /* - * Set cache line size based on type of cpu as a default. - * Systems with OF can look in the properties on the cpu node(s) - * for a possibly more accurate value. - */ - dcache_bsize = ppc64_caches.dline_size; - icache_bsize = ppc64_caches.iline_size; - - /* reboot on panic */ - panic_timeout = 180; - - if (ppc_md.panic) - notifier_chain_register(&panic_notifier_list, &ppc64_panic_block); - - init_mm.start_code = PAGE_OFFSET; - init_mm.end_code = (unsigned long) _etext; - init_mm.end_data = (unsigned long) _edata; - init_mm.brk = klimit; - - irqstack_early_init(); - emergency_stack_init(); - - stabs_alloc(); - - /* set up the bootmem stuff with available memory */ - do_init_bootmem(); - sparse_init(); - - /* initialize the syscall map in systemcfg */ - setup_syscall_map(); - -#ifdef CONFIG_DUMMY_CONSOLE - conswitchp = &dummy_con; -#endif - - ppc_md.setup_arch(); - - /* Use the default idle loop if the platform hasn't provided one. */ - if (NULL == ppc_md.idle_loop) { - ppc_md.idle_loop = default_idle; - printk(KERN_INFO "Using default idle loop\n"); - } - - paging_init(); - ppc64_boot_msg(0x15, "Setup Done"); -} - - -/* ToDo: do something useful if ppc_md is not yet setup. */ -#define PPC64_LINUX_FUNCTION 0x0f000000 -#define PPC64_IPL_MESSAGE 0xc0000000 -#define PPC64_TERM_MESSAGE 0xb0000000 - -static void ppc64_do_msg(unsigned int src, const char *msg) -{ - if (ppc_md.progress) { - char buf[128]; - - sprintf(buf, "%08X\n", src); - ppc_md.progress(buf, 0); - snprintf(buf, 128, "%s", msg); - ppc_md.progress(buf, 0); - } -} - -/* Print a boot progress message. */ -void ppc64_boot_msg(unsigned int src, const char *msg) -{ - ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_IPL_MESSAGE|src, msg); - printk("[boot]%04x %s\n", src, msg); -} - -/* Print a termination message (print only -- does not stop the kernel) */ -void ppc64_terminate_msg(unsigned int src, const char *msg) -{ - ppc64_do_msg(PPC64_LINUX_FUNCTION|PPC64_TERM_MESSAGE|src, msg); - printk("[terminate]%04x %s\n", src, msg); -} - -#ifndef CONFIG_PPC_ISERIES -/* - * This function can be used by platforms to "find" legacy serial ports. - * It works for "serial" nodes under an "isa" node, and will try to - * respect the "ibm,aix-loc" property if any. It works with up to 8 - * ports. - */ - -#define MAX_LEGACY_SERIAL_PORTS 8 -static struct plat_serial8250_port serial_ports[MAX_LEGACY_SERIAL_PORTS+1]; -static unsigned int old_serial_count; - -void __init generic_find_legacy_serial_ports(u64 *physport, - unsigned int *default_speed) -{ - struct device_node *np; - u32 *sizeprop; - - struct isa_reg_property { - u32 space; - u32 address; - u32 size; - }; - struct pci_reg_property { - struct pci_address addr; - u32 size_hi; - u32 size_lo; - }; - - DBG(" -> generic_find_legacy_serial_port()\n"); - - *physport = 0; - if (default_speed) - *default_speed = 0; - - np = of_find_node_by_path("/"); - if (!np) - return; - - /* First fill our array */ - for (np = NULL; (np = of_find_node_by_type(np, "serial"));) { - struct device_node *isa, *pci; - struct isa_reg_property *reg; - unsigned long phys_size, addr_size, io_base; - u32 *rangesp; - u32 *interrupts, *clk, *spd; - char *typep; - int index, rlen, rentsize; - - /* Ok, first check if it's under an "isa" parent */ - isa = of_get_parent(np); - if (!isa || strcmp(isa->name, "isa")) { - DBG("%s: no isa parent found\n", np->full_name); - continue; - } - - /* Now look for an "ibm,aix-loc" property that gives us ordering - * if any... - */ - typep = (char *)get_property(np, "ibm,aix-loc", NULL); - - /* Get the ISA port number */ - reg = (struct isa_reg_property *)get_property(np, "reg", NULL); - if (reg == NULL) - goto next_port; - /* We assume the interrupt number isn't translated ... */ - interrupts = (u32 *)get_property(np, "interrupts", NULL); - /* get clock freq. if present */ - clk = (u32 *)get_property(np, "clock-frequency", NULL); - /* get default speed if present */ - spd = (u32 *)get_property(np, "current-speed", NULL); - /* Default to locate at end of array */ - index = old_serial_count; /* end of the array by default */ - - /* If we have a location index, then use it */ - if (typep && *typep == 'S') { - index = simple_strtol(typep+1, NULL, 0) - 1; - /* if index is out of range, use end of array instead */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - index = old_serial_count; - /* if our index is still out of range, that mean that - * array is full, we could scan for a free slot but that - * make little sense to bother, just skip the port - */ - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - /* Check if there is a port who already claimed our slot */ - if (serial_ports[index].iobase != 0) { - /* if we still have some room, move it, else override */ - if (old_serial_count < MAX_LEGACY_SERIAL_PORTS) { - DBG("Moved legacy port %d -> %d\n", index, - old_serial_count); - serial_ports[old_serial_count++] = - serial_ports[index]; - } else { - DBG("Replacing legacy port %d\n", index); - } - } - } - if (index >= MAX_LEGACY_SERIAL_PORTS) - goto next_port; - if (index >= old_serial_count) - old_serial_count = index + 1; - - /* Now fill the entry */ - memset(&serial_ports[index], 0, sizeof(struct plat_serial8250_port)); - serial_ports[index].uartclk = clk ? *clk : BASE_BAUD * 16; - serial_ports[index].iobase = reg->address; - serial_ports[index].irq = interrupts ? interrupts[0] : 0; - serial_ports[index].flags = ASYNC_BOOT_AUTOCONF; - - DBG("Added legacy port, index: %d, port: %x, irq: %d, clk: %d\n", - index, - serial_ports[index].iobase, - serial_ports[index].irq, - serial_ports[index].uartclk); - - /* Get phys address of IO reg for port 1 */ - if (index != 0) - goto next_port; - - pci = of_get_parent(isa); - if (!pci) { - DBG("%s: no pci parent found\n", np->full_name); - goto next_port; - } - - rangesp = (u32 *)get_property(pci, "ranges", &rlen); - if (rangesp == NULL) { - of_node_put(pci); - goto next_port; - } - rlen /= 4; - - /* we need the #size-cells of the PCI bridge node itself */ - phys_size = 1; - sizeprop = (u32 *)get_property(pci, "#size-cells", NULL); - if (sizeprop != NULL) - phys_size = *sizeprop; - /* we need the parent #addr-cells */ - addr_size = prom_n_addr_cells(pci); - rentsize = 3 + addr_size + phys_size; - io_base = 0; - for (;rlen >= rentsize; rlen -= rentsize,rangesp += rentsize) { - if (((rangesp[0] >> 24) & 0x3) != 1) - continue; /* not IO space */ - io_base = rangesp[3]; - if (addr_size == 2) - io_base = (io_base << 32) | rangesp[4]; - } - if (io_base != 0) { - *physport = io_base + reg->address; - if (default_speed && spd) - *default_speed = *spd; - } - of_node_put(pci); - next_port: - of_node_put(isa); - } - - DBG(" <- generic_find_legacy_serial_port()\n"); -} - -static struct platform_device serial_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = serial_ports, - }, -}; - -static int __init serial_dev_init(void) -{ - return platform_device_register(&serial_device); -} -arch_initcall(serial_dev_init); - -#endif /* CONFIG_PPC_ISERIES */ - -int check_legacy_ioport(unsigned long base_port) -{ - if (ppc_md.check_legacy_ioport == NULL) - return 0; - return ppc_md.check_legacy_ioport(base_port); -} -EXPORT_SYMBOL(check_legacy_ioport); - -#ifdef CONFIG_XMON -static int __init early_xmon(char *p) -{ - /* ensure xmon is enabled */ - if (p) { - if (strncmp(p, "on", 2) == 0) - xmon_init(1); - if (strncmp(p, "off", 3) == 0) - xmon_init(0); - if (strncmp(p, "early", 5) != 0) - return 0; - } - xmon_init(1); - debugger(NULL); - - return 0; -} -early_param("xmon", early_xmon); -#endif - -void cpu_die(void) -{ - if (ppc_md.cpu_die) - ppc_md.cpu_die(); -} -- 2.41.1