From f52a8af70d50ffaf665862f6315352595dd94962 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 18 Nov 2008 11:05:04 -0800 Subject: [PATCH] Staging: comedi: dt9812: fix up a lot of coding style issues Lots of checkpatch.pl warnings and errors resolved in the comedi dt9812 usb driver. Cc: Anders Blomdell Cc: David Schleef Cc: Frank Mori Hess Cc: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/dt9812.c | 559 ++++++++++++------------ drivers/staging/comedi/drivers/dt9812.h | 134 +++--- 2 files changed, 365 insertions(+), 328 deletions(-) diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c index d6fb1624006..e93c308c832 100644 --- a/drivers/staging/comedi/drivers/dt9812.c +++ b/drivers/staging/comedi/drivers/dt9812.c @@ -43,27 +43,25 @@ for my needs. * says P1). */ -#include -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) - #include #include #include #include #include #include -#include +#include #include + #include "../comedidev.h" #include "dt9812.h" -#define DT9812_NUM_SLOTS 16 +#define DT9812_NUM_SLOTS 16 static DECLARE_MUTEX(dt9812_mutex); static struct usb_device_id dt9812_table[] = { {USB_DEVICE(0x0867, 0x9812)}, - {} /* Terminating entry */ + { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, dt9812_table); @@ -119,7 +117,7 @@ static const comedi_lrange dt9812_2pt5_aout_range = { 1, { static slot_dt9812_t dt9812[DT9812_NUM_SLOTS]; -// Useful shorthand access to private data +/* Useful shorthand access to private data */ #define devpriv ((comedi_dt9812_t *)dev->private) static inline usb_dt9812_t *to_dt9812_dev(struct kref *d) @@ -135,8 +133,8 @@ static void dt9812_delete(struct kref *kref) kfree(dev); } -static int dt9812_read_info(usb_dt9812_t * dev, - int offset, void *buf, size_t buf_size) +static int dt9812_read_info(usb_dt9812_t *dev, int offset, void *buf, + size_t buf_size) { dt9812_usb_cmd_t cmd; int count, retval; @@ -146,41 +144,49 @@ static int dt9812_read_info(usb_dt9812_t * dev, cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset); cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size); + /* DT9812 only responds to 32 byte writes!! */ count = 32; - retval = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->command_write.addr), &cmd, 32, // DT9812 only responds to 32 byte writes!! - &count, HZ * 1); - if (retval == 0) { - retval = usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, dev->command_read.addr), - buf, buf_size, &count, HZ * 1); - } + retval = usb_bulk_msg(dev->udev, + usb_sndbulkpipe(dev->udev, + dev->command_write.addr), + &cmd, 32, &count, HZ * 1); + if (retval) + return retval; + retval = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->command_read.addr), + buf, buf_size, &count, HZ * 1); return retval; } -static int dt9812_read_multiple_registers(usb_dt9812_t * dev, - int reg_count, u8 * address, u8 * value) +static int dt9812_read_multiple_registers(usb_dt9812_t *dev, int reg_count, + u8 *address, u8 *value) { dt9812_usb_cmd_t cmd; int i, count, retval; cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG); cmd.u.read_multi_info.count = reg_count; - for (i = 0; i < reg_count; i++) { + for (i = 0; i < reg_count; i++) cmd.u.read_multi_info.address[i] = address[i]; - } + + /* DT9812 only responds to 32 byte writes!! */ count = 32; - retval = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->command_write.addr), &cmd, 32, // DT9812 only responds to 32 byte writes!! - &count, HZ * 1); - if (retval == 0) { - retval = usb_bulk_msg(dev->udev, - usb_rcvbulkpipe(dev->udev, dev->command_read.addr), - value, reg_count, &count, HZ * 1); - } + retval = usb_bulk_msg(dev->udev, + usb_sndbulkpipe(dev->udev, + dev->command_write.addr), + &cmd, 32, &count, HZ * 1); + if (retval) + return retval; + retval = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, + dev->command_read.addr), + value, reg_count, &count, HZ * 1); return retval; } -static int dt9812_write_multiple_registers(usb_dt9812_t * dev, - int reg_count, u8 * address, u8 * value) +static int dt9812_write_multiple_registers(usb_dt9812_t *dev, int reg_count, + u8 *address, u8 *value) { dt9812_usb_cmd_t cmd; int i, count, retval; @@ -191,28 +197,34 @@ static int dt9812_write_multiple_registers(usb_dt9812_t * dev, cmd.u.write_multi_info.write[i].address = address[i]; cmd.u.write_multi_info.write[i].value = value[i]; } - retval = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->command_write.addr), &cmd, 32, // DT9812 only responds to 32 byte writes!! - &count, HZ * 1); + /* DT9812 only responds to 32 byte writes!! */ + retval = usb_bulk_msg(dev->udev, + usb_sndbulkpipe(dev->udev, + dev->command_write.addr), + &cmd, 32, &count, HZ * 1); return retval; } -static int dt9812_rmw_multiple_registers(usb_dt9812_t * dev, - int reg_count, dt9812_rmw_byte_t rmw[]) +static int dt9812_rmw_multiple_registers(usb_dt9812_t *dev, int reg_count, + dt9812_rmw_byte_t rmw[]) { dt9812_usb_cmd_t cmd; int i, count, retval; cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG); cmd.u.rmw_multi_info.count = reg_count; - for (i = 0; i < reg_count; i++) { + for (i = 0; i < reg_count; i++) cmd.u.rmw_multi_info.rmw[i] = rmw[i]; - } - retval = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->command_write.addr), &cmd, 32, // DT9812 only responds to 32 byte writes!! - &count, HZ * 1); + + /* DT9812 only responds to 32 byte writes!! */ + retval = usb_bulk_msg(dev->udev, + usb_sndbulkpipe(dev->udev, + dev->command_write.addr), + &cmd, 32, &count, HZ * 1); return retval; } -static int dt9812_digital_in(slot_dt9812_t * slot, u8 * bits) +static int dt9812_digital_in(slot_dt9812_t *slot, u8 *bits) { int result = -ENODEV; @@ -222,12 +234,16 @@ static int dt9812_digital_in(slot_dt9812_t * slot, u8 * bits) u8 value[2]; result = dt9812_read_multiple_registers(slot->usb, 2, reg, - value); + value); if (result == 0) { - // bits 0-6 in F020_SFR_P3 are bits 0-6 in the digital input port - // bit 3 in F020_SFR_P1 is bit 7 in the digital input port + /* + * bits 0-6 in F020_SFR_P3 are bits 0-6 in the digital + * input port bit 3 in F020_SFR_P1 is bit 7 in the + * digital input port + */ *bits = (value[0] & 0x7f) | ((value[1] & 0x08) << 4); -// printk("%2.2x, %2.2x -> %2.2x\n", value[0], value[1], *bits); + /* printk("%2.2x, %2.2x -> %2.2x\n", + value[0], value[1], *bits); */ } } up(&slot->mutex); @@ -235,7 +251,7 @@ static int dt9812_digital_in(slot_dt9812_t * slot, u8 * bits) return result; } -static int dt9812_digital_out(slot_dt9812_t * slot, u8 bits) +static int dt9812_digital_out(slot_dt9812_t *slot, u8 bits) { int result = -ENODEV; @@ -247,14 +263,14 @@ static int dt9812_digital_out(slot_dt9812_t * slot, u8 bits) reg[0] = F020_SFR_P2; value[0] = bits; result = dt9812_write_multiple_registers(slot->usb, 1, reg, - value); + value); slot->usb->digital_out_shadow = bits; } up(&slot->mutex); return result; } -static int dt9812_digital_out_shadow(slot_dt9812_t * slot, u8 * bits) +static int dt9812_digital_out_shadow(slot_dt9812_t *slot, u8 *bits) { int result = -ENODEV; @@ -267,139 +283,137 @@ static int dt9812_digital_out_shadow(slot_dt9812_t * slot, u8 * bits) return result; } -static void dt9812_configure_mux(usb_dt9812_t * dev, - dt9812_rmw_byte_t * rmw, int channel) +static void dt9812_configure_mux(usb_dt9812_t *dev, dt9812_rmw_byte_t *rmw, + int channel) { if (dev->device == DT9812_DEVID_DT9812_10) { - // In the DT9812/10V MUX is selected by P1.5-7 + /* In the DT9812/10V MUX is selected by P1.5-7 */ rmw->address = F020_SFR_P1; rmw->and_mask = 0xe0; rmw->or_value = channel << 5; } else { - // In the DT9812/2.5V, the internal mux is selected by bits 0:2 + /* In the DT9812/2.5V, internal mux is selected by bits 0:2 */ rmw->address = F020_SFR_AMX0SL; rmw->and_mask = 0xff; rmw->or_value = channel & 0x07; } } -static void dt9812_configure_gain(usb_dt9812_t * dev, - dt9812_rmw_byte_t * rmw, dt9812_gain_t gain) +static void dt9812_configure_gain(usb_dt9812_t *dev, dt9812_rmw_byte_t *rmw, + dt9812_gain_t gain) { if (dev->device == DT9812_DEVID_DT9812_10) { - // In the DT9812/10V, there is an external gain of 0.5 + /* In the DT9812/10V, there is an external gain of 0.5 */ gain <<= 1; } rmw->address = F020_SFR_ADC0CF; - rmw->and_mask = - F020_MASK_ADC0CF_AMP0GN2 | - F020_MASK_ADC0CF_AMP0GN1 | F020_MASK_ADC0CF_AMP0GN0; + rmw->and_mask = F020_MASK_ADC0CF_AMP0GN2 | + F020_MASK_ADC0CF_AMP0GN1 | + F020_MASK_ADC0CF_AMP0GN0; switch (gain) { - // 000 -> Gain = 1 - // 001 -> Gain = 2 - // 010 -> Gain = 4 - // 011 -> Gain = 8 - // 10x -> Gain = 16 - // 11x -> Gain = 0.5 - case DT9812_GAIN_0PT5:{ - rmw->or_value = F020_MASK_ADC0CF_AMP0GN2 - || F020_MASK_ADC0CF_AMP0GN1; - } + /* + * 000 -> Gain = 1 + * 001 -> Gain = 2 + * 010 -> Gain = 4 + * 011 -> Gain = 8 + * 10x -> Gain = 16 + * 11x -> Gain = 0.5 + */ + case DT9812_GAIN_0PT5: + rmw->or_value = F020_MASK_ADC0CF_AMP0GN2 || + F020_MASK_ADC0CF_AMP0GN1; break; - case DT9812_GAIN_1:{ - rmw->or_value = 0x00; - } + case DT9812_GAIN_1: + rmw->or_value = 0x00; break; - case DT9812_GAIN_2:{ - rmw->or_value = F020_MASK_ADC0CF_AMP0GN0; - } + case DT9812_GAIN_2: + rmw->or_value = F020_MASK_ADC0CF_AMP0GN0; break; - case DT9812_GAIN_4:{ - rmw->or_value = F020_MASK_ADC0CF_AMP0GN1; - } + case DT9812_GAIN_4: + rmw->or_value = F020_MASK_ADC0CF_AMP0GN1; break; - case DT9812_GAIN_8:{ - rmw->or_value = F020_MASK_ADC0CF_AMP0GN1 - || F020_MASK_ADC0CF_AMP0GN0; - } + case DT9812_GAIN_8: + rmw->or_value = F020_MASK_ADC0CF_AMP0GN1 || + F020_MASK_ADC0CF_AMP0GN0; break; - case DT9812_GAIN_16:{ - rmw->or_value = F020_MASK_ADC0CF_AMP0GN2; - } + case DT9812_GAIN_16: + rmw->or_value = F020_MASK_ADC0CF_AMP0GN2; break; - default:{ - err("Illegal gain %d\n", gain); - } + default: + err("Illegal gain %d\n", gain); + } } -static int dt9812_analog_in(slot_dt9812_t * slot, - int channel, u16 * value, dt9812_gain_t gain) +static int dt9812_analog_in(slot_dt9812_t *slot, int channel, u16 *value, + dt9812_gain_t gain) { + dt9812_rmw_byte_t rmw[3]; + u8 reg[3] = { + F020_SFR_ADC0CN, + F020_SFR_ADC0H, + F020_SFR_ADC0L + }; + u8 val[3]; int result = -ENODEV; down(&slot->mutex); - if (slot->usb) { - dt9812_rmw_byte_t rmw[3]; - - // 1 select the gain - dt9812_configure_gain(slot->usb, &rmw[0], gain); - - // 2 set the MUX to select the channel - dt9812_configure_mux(slot->usb, &rmw[1], channel); - - // 3 start conversion - rmw[2].address = F020_SFR_ADC0CN; - rmw[2].and_mask = 0xff; - rmw[2].or_value = - F020_MASK_ADC0CN_AD0EN | F020_MASK_ADC0CN_AD0BUSY; - - result = dt9812_rmw_multiple_registers(slot->usb, 3, rmw); - if (result == 0) { - // read the status and ADC - u8 reg[3] = { F020_SFR_ADC0CN, F020_SFR_ADC0H, - F020_SFR_ADC0L - }; - u8 val[3]; - result = dt9812_read_multiple_registers(slot->usb, 3, - reg, val); - if (result == 0) { - // An ADC conversion takes 16 SAR clocks cycles, i.e. about 9us. - // Therefore, between the instant that AD0BUSY was set via - // dt9812_rmw_multiple_registers and the read of AD0BUSY via - // dt9812_read_multiple_registers, the conversion - // should be complete since these two operations require two USB - // transactions each taking at least a millisecond to complete. - // However, lets make sure that conversion is finished. - if ((val[0] & (F020_MASK_ADC0CN_AD0INT | - F020_MASK_ADC0CN_AD0BUSY)) - == F020_MASK_ADC0CN_AD0INT) { - switch (slot->usb->device) { - case DT9812_DEVID_DT9812_10:{ - // For DT9812-10V the personality module set the encoding to 2's - // complement. Hence, convert it before returning it - *value = ((val[1] << 8) - | val[2]) + - 0x800; - } - break; - case DT9812_DEVID_DT9812_2PT5:{ - *value = (val[1] << 8) | - val[2]; - } - break; - } - } - } + if (!slot->usb) + goto exit; + + /* 1 select the gain */ + dt9812_configure_gain(slot->usb, &rmw[0], gain); + + /* 2 set the MUX to select the channel */ + dt9812_configure_mux(slot->usb, &rmw[1], channel); + + /* 3 start conversion */ + rmw[2].address = F020_SFR_ADC0CN; + rmw[2].and_mask = 0xff; + rmw[2].or_value = F020_MASK_ADC0CN_AD0EN | F020_MASK_ADC0CN_AD0BUSY; + + result = dt9812_rmw_multiple_registers(slot->usb, 3, rmw); + if (result) + goto exit; + + /* read the status and ADC */ + result = dt9812_read_multiple_registers(slot->usb, 3, reg, val); + if (result) + goto exit; + /* + * An ADC conversion takes 16 SAR clocks cycles, i.e. about 9us. + * Therefore, between the instant that AD0BUSY was set via + * dt9812_rmw_multiple_registers and the read of AD0BUSY via + * dt9812_read_multiple_registers, the conversion should be complete + * since these two operations require two USB transactions each taking + * at least a millisecond to complete. However, lets make sure that + * conversion is finished. + */ + if ((val[0] & (F020_MASK_ADC0CN_AD0INT | F020_MASK_ADC0CN_AD0BUSY)) == + F020_MASK_ADC0CN_AD0INT) { + switch (slot->usb->device) { + case DT9812_DEVID_DT9812_10: + /* + * For DT9812-10V the personality module set the + * encoding to 2's complement. Hence, convert it before + * returning it + */ + *value = ((val[1] << 8) | val[2]) + 0x800; + break; + case DT9812_DEVID_DT9812_2PT5: + *value = (val[1] << 8) | val[2]; + break; } } + +exit: up(&slot->mutex); return result; } -static int dt9812_analog_out_shadow(slot_dt9812_t * slot, int channel, - u16 * value) +static int dt9812_analog_out_shadow(slot_dt9812_t *slot, int channel, + u16 *value) { int result = -ENODEV; @@ -413,7 +427,7 @@ static int dt9812_analog_out_shadow(slot_dt9812_t * slot, int channel, return result; } -static int dt9812_analog_out(slot_dt9812_t * slot, int channel, u16 value) +static int dt9812_analog_out(slot_dt9812_t *slot, int channel, u16 value) { int result = -ENODEV; @@ -422,39 +436,40 @@ static int dt9812_analog_out(slot_dt9812_t * slot, int channel, u16 value) dt9812_rmw_byte_t rmw[3]; switch (channel) { - case 0:{ - // 1. Set DAC mode - rmw[0].address = F020_SFR_DAC0CN; - rmw[0].and_mask = 0xff; - rmw[0].or_value = F020_MASK_DACxCN_DACxEN; - - // 2 load low byte of DAC value first - rmw[1].address = F020_SFR_DAC0L; - rmw[1].and_mask = 0xff; - rmw[1].or_value = value & 0xff; - - // 3 load high byte of DAC value next to latch the 12-bit value - rmw[2].address = F020_SFR_DAC0H; - rmw[2].and_mask = 0xff; - rmw[2].or_value = (value >> 8) & 0xf; - } + case 0: + /* 1. Set DAC mode */ + rmw[0].address = F020_SFR_DAC0CN; + rmw[0].and_mask = 0xff; + rmw[0].or_value = F020_MASK_DACxCN_DACxEN; + + /* 2 load low byte of DAC value first */ + rmw[1].address = F020_SFR_DAC0L; + rmw[1].and_mask = 0xff; + rmw[1].or_value = value & 0xff; + + /* 3 load high byte of DAC value next to latch the + 12-bit value */ + rmw[2].address = F020_SFR_DAC0H; + rmw[2].and_mask = 0xff; + rmw[2].or_value = (value >> 8) & 0xf; break; - case 1:{ - // 1. Set DAC mode - rmw[0].address = F020_SFR_DAC1CN; - rmw[0].and_mask = 0xff; - rmw[0].or_value = F020_MASK_DACxCN_DACxEN; - - // 2 load low byte of DAC value first - rmw[1].address = F020_SFR_DAC1L; - rmw[1].and_mask = 0xff; - rmw[1].or_value = value & 0xff; - - // 3 load high byte of DAC value next to latch the 12-bit value - rmw[2].address = F020_SFR_DAC1H; - rmw[2].and_mask = 0xff; - rmw[2].or_value = (value >> 8) & 0xf; - } + + case 1: + /* 1. Set DAC mode */ + rmw[0].address = F020_SFR_DAC1CN; + rmw[0].and_mask = 0xff; + rmw[0].or_value = F020_MASK_DACxCN_DACxEN; + + /* 2 load low byte of DAC value first */ + rmw[1].address = F020_SFR_DAC1L; + rmw[1].and_mask = 0xff; + rmw[1].or_value = value & 0xff; + + /* 3 load high byte of DAC value next to latch the + 12-bit value */ + rmw[2].address = F020_SFR_DAC1H; + rmw[2].and_mask = 0xff; + rmw[2].or_value = (value >> 8) & 0xf; break; } result = dt9812_rmw_multiple_registers(slot->usb, 3, rmw); @@ -470,7 +485,7 @@ static int dt9812_analog_out(slot_dt9812_t * slot, int channel, u16 value) */ static int dt9812_probe(struct usb_interface *interface, - const struct usb_device_id *id) + const struct usb_device_id *id) { int retval = -ENOMEM; usb_dt9812_t *dev = NULL; @@ -479,10 +494,10 @@ static int dt9812_probe(struct usb_interface *interface, int i; u8 fw; - // allocate memory for our device state and initialize it + /* allocate memory for our device state and initialize it */ dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (dev == NULL) { - err("Out of memory"); + dev_err(&interface->dev, "Out of memory\n"); goto error; } kref_init(&dev->kref); @@ -490,7 +505,7 @@ static int dt9812_probe(struct usb_interface *interface, dev->udev = usb_get_dev(interface_to_usbdev(interface)); dev->interface = interface; - // Check endpoints + /* Check endpoints */ iface_desc = interface->cur_altsetting; if (iface_desc->desc.bNumEndpoints != 5) { @@ -503,63 +518,59 @@ static int dt9812_probe(struct usb_interface *interface, int direction = -1; endpoint = &iface_desc->endpoint[i].desc; switch (i) { - case 0:{ - direction = USB_DIR_IN; - dev->message_pipe.addr = - endpoint->bEndpointAddress; - dev->message_pipe.size = + case 0: + direction = USB_DIR_IN; + dev->message_pipe.addr = endpoint->bEndpointAddress; + dev->message_pipe.size = le16_to_cpu(endpoint->wMaxPacketSize); - } + break; - case 1:{ - direction = USB_DIR_OUT; - dev->command_write.addr = - endpoint->bEndpointAddress; - dev->command_write.size = + case 1: + direction = USB_DIR_OUT; + dev->command_write.addr = endpoint->bEndpointAddress; + dev->command_write.size = le16_to_cpu(endpoint->wMaxPacketSize); - } break; - case 2:{ - direction = USB_DIR_IN; - dev->command_read.addr = - endpoint->bEndpointAddress; - dev->command_read.size = + case 2: + direction = USB_DIR_IN; + dev->command_read.addr = endpoint->bEndpointAddress; + dev->command_read.size = le16_to_cpu(endpoint->wMaxPacketSize); - } break; - case 3:{ - direction = USB_DIR_OUT; - dev->write_stream.addr = - endpoint->bEndpointAddress; - dev->write_stream.size = + case 3: + direction = USB_DIR_OUT; + dev->write_stream.addr = endpoint->bEndpointAddress; + dev->write_stream.size = le16_to_cpu(endpoint->wMaxPacketSize); - } break; - case 4:{ - direction = USB_DIR_IN; - dev->read_stream.addr = - endpoint->bEndpointAddress; - dev->read_stream.size = + case 4: + direction = USB_DIR_IN; + dev->read_stream.addr = endpoint->bEndpointAddress; + dev->read_stream.size = le16_to_cpu(endpoint->wMaxPacketSize); - } break; } if ((endpoint->bEndpointAddress & USB_DIR_IN) != direction) { - err("Endpoint has wrong direction."); + dev_err(&interface->dev, + "Endpoint has wrong direction.\n"); retval = -ENODEV; goto error; } } if (dt9812_read_info(dev, 0, &fw, sizeof(fw)) != 0) { - // Seems like a configuration reset is necessary if driver - // is reloaded while device is attached + /* + * Seems like a configuration reset is necessary if driver is + * reloaded while device is attached + */ int i; usb_reset_configuration(dev->udev); for (i = 0; i < 10; i++) { retval = dt9812_read_info(dev, 1, &fw, sizeof(fw)); if (retval == 0) { - printk("usb_reset_configuration succeded after %d iterations\n", i); + dev_info(&interface->dev, + "usb_reset_configuration succeded " + "after %d iterations\n", i); break; } } @@ -570,7 +581,8 @@ static int dt9812_probe(struct usb_interface *interface, retval = -ENODEV; goto error; } - if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) { + if (dt9812_read_info(dev, 3, &dev->product, + sizeof(dev->product)) != 0) { err("Failed to read product."); retval = -ENODEV; goto error; @@ -591,44 +603,39 @@ static int dt9812_probe(struct usb_interface *interface, dev->device = le16_to_cpu(dev->device); dev->serial = le32_to_cpu(dev->serial); switch (dev->device) { - case DT9812_DEVID_DT9812_10:{ - dev->analog_out_shadow[0] = 0x0800; - dev->analog_out_shadow[1] = 0x800; - } + case DT9812_DEVID_DT9812_10: + dev->analog_out_shadow[0] = 0x0800; + dev->analog_out_shadow[1] = 0x800; break; - case DT9812_DEVID_DT9812_2PT5:{ - dev->analog_out_shadow[0] = 0x0000; - dev->analog_out_shadow[1] = 0x0000; - } + case DT9812_DEVID_DT9812_2PT5: + dev->analog_out_shadow[0] = 0x0000; + dev->analog_out_shadow[1] = 0x0000; break; } dev->digital_out_shadow = 0; - // save our data pointer in this interface device a + /* save our data pointer in this interface device */ usb_set_intfdata(interface, dev); - // let the user know what node this device is now attached to + /* let the user know what node this device is now attached to */ dev_info(&interface->dev, "USB DT9812 (%4.4x.%4.4x.%4.4x) #0x%8.8x\n", dev->vendor, dev->product, dev->device, dev->serial); down(&dt9812_mutex); { - // Find a slot for the USB device + /* Find a slot for the USB device */ slot_dt9812_t *first = NULL; slot_dt9812_t *best = NULL; for (i = 0; i < DT9812_NUM_SLOTS; i++) { - if (!first && !dt9812[i].usb && dt9812[i].serial == 0) { + if (!first && !dt9812[i].usb && dt9812[i].serial == 0) first = &dt9812[i]; - } - if (!best && dt9812[i].serial == dev->serial) { + if (!best && dt9812[i].serial == dev->serial) best = &dt9812[i]; - } } - if (!best) { + if (!best) best = first; - } if (best) { down(&best->mutex); @@ -641,10 +648,9 @@ static int dt9812_probe(struct usb_interface *interface, return 0; - error: - if (dev) { +error: + if (dev) kref_put(&dev->kref, dt9812_delete); - } return retval; } @@ -684,11 +690,11 @@ static struct usb_driver dt9812_usb_driver = { * Comedi functions */ -static void dt9812_comedi_open(comedi_device * dev) +static void dt9812_comedi_open(comedi_device *dev) { down(&devpriv->slot->mutex); if (devpriv->slot->usb) { - // We have an attached device, fill in current range info + /* We have an attached device, fill in current range info */ comedi_subdevice *s; s = &dev->subdevices[0]; @@ -732,21 +738,20 @@ static void dt9812_comedi_open(comedi_device * dev) up(&devpriv->slot->mutex); } -static int dt9812_di_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int dt9812_di_rinsn(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int n; u8 bits = 0; dt9812_digital_in(devpriv->slot, &bits); - for (n = 0; n < insn->n; n++) { + for (n = 0; n < insn->n; n++) data[n] = ((1 << insn->chanspec) & bits) != 0; - } return n; } -static int dt9812_do_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int dt9812_do_winsn(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int n; u8 bits = 0; @@ -756,16 +761,15 @@ static int dt9812_do_winsn(comedi_device * dev, comedi_subdevice * s, u8 mask = 1 << insn->chanspec; bits &= ~mask; - if (data[n]) { + if (data[n]) bits |= mask; - } } dt9812_digital_out(devpriv->slot, bits); return n; } -static int dt9812_ai_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int dt9812_ai_rinsn(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int n; @@ -773,57 +777,57 @@ static int dt9812_ai_rinsn(comedi_device * dev, comedi_subdevice * s, u16 value = 0; dt9812_analog_in(devpriv->slot, insn->chanspec, &value, - DT9812_GAIN_1); + DT9812_GAIN_1); data[n] = value; } return n; } -static int dt9812_ao_rinsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int dt9812_ao_rinsn(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int n; + u16 value; for (n = 0; n < insn->n; n++) { - u16 value = 0; - + value = 0; dt9812_analog_out_shadow(devpriv->slot, insn->chanspec, &value); data[n] = value; } return n; } -static int dt9812_ao_winsn(comedi_device * dev, comedi_subdevice * s, - comedi_insn * insn, lsampl_t * data) +static int dt9812_ao_winsn(comedi_device *dev, comedi_subdevice *s, + comedi_insn *insn, lsampl_t *data) { int n; - for (n = 0; n < insn->n; n++) { + for (n = 0; n < insn->n; n++) dt9812_analog_out(devpriv->slot, insn->chanspec, data[n]); - } return n; } -static int dt9812_attach(comedi_device * dev, comedi_devconfig * it) +static int dt9812_attach(comedi_device *dev, comedi_devconfig *it) { int i; comedi_subdevice *s; dev->board_name = "dt9812"; - if (alloc_private(dev, sizeof(comedi_dt9812_t)) < 0) { + if (alloc_private(dev, sizeof(comedi_dt9812_t)) < 0) return -ENOMEM; - } - // Special open routine, since USB unit may be unattached at - // comedi_config time, hence range can not be determined + + /* + * Special open routine, since USB unit may be unattached at + * comedi_config time, hence range can not be determined + */ dev->open = dt9812_comedi_open; devpriv->serial = it->options[0]; - // Allocate subdevices - if (alloc_subdevices(dev, 4) < 0) { + /* Allocate subdevices */ + if (alloc_subdevices(dev, 4) < 0) return -ENOMEM; - } /* digital input subdevice */ s = dev->subdevices + 0; @@ -862,28 +866,28 @@ static int dt9812_attach(comedi_device * dev, comedi_devconfig * it) s->insn_write = &dt9812_ao_winsn; s->insn_read = &dt9812_ao_rinsn; - printk("comedi%d: successfully attached to dt9812.\n", dev->minor); + printk(KERN_INFO "comedi%d: successfully attached to dt9812.\n", + dev->minor); down(&dt9812_mutex); - // Find a slot for the comedi device + /* Find a slot for the comedi device */ { slot_dt9812_t *first = NULL; slot_dt9812_t *best = NULL; for (i = 0; i < DT9812_NUM_SLOTS; i++) { if (!first && !dt9812[i].comedi) { - // First free slot from comedi side + /* First free slot from comedi side */ first = &dt9812[i]; } if (!best && - dt9812[i].usb - && dt9812[i].usb->serial == devpriv->serial) { - // We have an attaced device with matching ID + dt9812[i].usb && + dt9812[i].usb->serial == devpriv->serial) { + /* We have an attaced device with matching ID */ best = &dt9812[i]; } } - if (!best) { + if (!best) best = first; - } if (best) { down(&best->mutex); best->comedi = devpriv; @@ -897,9 +901,8 @@ static int dt9812_attach(comedi_device * dev, comedi_devconfig * it) return 0; } -static int dt9812_detach(comedi_device * dev) +static int dt9812_detach(comedi_device *dev) { - return 0; } @@ -914,7 +917,7 @@ static int __init usb_dt9812_init(void) { int result, i; - // Initialize all driver slots + /* Initialize all driver slots */ for (i = 0; i < DT9812_NUM_SLOTS; i++) { init_MUTEX(&dt9812[i].mutex); dt9812[i].serial = 0; @@ -923,12 +926,14 @@ static int __init usb_dt9812_init(void) } dt9812[12].serial = 0x0; - // register with the USB subsystem + /* register with the USB subsystem */ result = usb_register(&dt9812_usb_driver); if (result) { - err("usb_register failed. Error number %d", result); + printk(KERN_ERR KBUILD_MODNAME + ": usb_register failed. Error number %d\n", result); + return result; } - // register with comedi + /* register with comedi */ result = comedi_driver_register(&dt9812_comedi_driver); if (result) { usb_deregister(&dt9812_usb_driver); @@ -940,7 +945,7 @@ static int __init usb_dt9812_init(void) static void __exit usb_dt9812_exit(void) { - // unregister with comedi + /* unregister with comedi */ comedi_driver_unregister(&dt9812_comedi_driver); /* deregister this driver with the USB subsystem */ @@ -953,5 +958,3 @@ module_exit(usb_dt9812_exit); MODULE_AUTHOR("Anders Blomdell "); MODULE_DESCRIPTION("Comedi DT9812 driver"); MODULE_LICENSE("GPL"); - -#endif // LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) diff --git a/drivers/staging/comedi/drivers/dt9812.h b/drivers/staging/comedi/drivers/dt9812.h index 180fd5a3957..471958a4222 100644 --- a/drivers/staging/comedi/drivers/dt9812.h +++ b/drivers/staging/comedi/drivers/dt9812.h @@ -35,12 +35,13 @@ #define F020_MASK_DACxCN_DACxEN 0x80 -typedef enum { // A/D D/A DI DO CT - DT9812_DEVID_DT9812_10, // 8 2 8 8 1 +/- 10V - DT9812_DEVID_DT9812_2PT5, // 8 2 8 8 1 0-2.44V +typedef enum { + /* A/D D/A DI DO CT */ + DT9812_DEVID_DT9812_10, /* 8 2 8 8 1 +/- 10V */ + DT9812_DEVID_DT9812_2PT5,/* 8 2 8 8 1 0-2.44V */ #if 0 - DT9812_DEVID_DT9813, // 16 2 4 4 1 +/- 10V - DT9812_DEVID_DT9814 // 24 2 0 0 1 +/- 10V + DT9812_DEVID_DT9813, /* 16 2 4 4 1 +/- 10V */ + DT9812_DEVID_DT9814 /* 24 2 0 0 1 +/- 10V */ #endif } dt9812_devid_t; @@ -56,51 +57,84 @@ typedef enum { typedef enum { DT9812_LEAST_USB_FIRMWARE_CMD_CODE = 0, - DT9812_W_FLASH_DATA = 0, // Write Flash memory - DT9812_R_FLASH_DATA = 1, // Read Flash memory (misc config info) - - // Register read/write commands for processor - DT9812_R_SINGLE_BYTE_REG = 2, // Read a single byte of USB memory - DT9812_W_SINGLE_BYTE_REG = 3, // Write a single byte of USB memory - DT9812_R_MULTI_BYTE_REG = 4, // Multiple Reads of USB memory - DT9812_W_MULTI_BYTE_REG = 5, // Multiple Writes of USB memory - DT9812_RMW_SINGLE_BYTE_REG = 6, // Read, (AND) with mask, OR value, - // then write (single) - DT9812_RMW_MULTI_BYTE_REG = 7, // Read, (AND) with mask, OR value, - // then write (multiple) - - // Register read/write commands for SMBus - DT9812_R_SINGLE_BYTE_SMBUS = 8, // Read a single byte of SMBus - DT9812_W_SINGLE_BYTE_SMBUS = 9, // Write a single byte of SMBus - DT9812_R_MULTI_BYTE_SMBUS = 10, // Multiple Reads of SMBus - DT9812_W_MULTI_BYTE_SMBUS = 11, // Multiple Writes of SMBus - - // Register read/write commands for a device - DT9812_R_SINGLE_BYTE_DEV = 12, // Read a single byte of a device - DT9812_W_SINGLE_BYTE_DEV = 13, // Write a single byte of a device - DT9812_R_MULTI_BYTE_DEV = 14, // Multiple Reads of a device - DT9812_W_MULTI_BYTE_DEV = 15, // Multiple Writes of a device - - DT9812_W_DAC_THRESHOLD = 16, // Not sure if we'll need this - - DT9812_W_INT_ON_CHANGE_MASK = 17, // Set interrupt on change mask - - DT9812_W_CGL = 18, // Write (or Clear) the CGL for the ADC - DT9812_R_MULTI_BYTE_USBMEM = 19, // Multiple Reads of USB memory - DT9812_W_MULTI_BYTE_USBMEM = 20, // Multiple Writes to USB memory - - DT9812_START_SUBSYSTEM = 21, // Issue a start command to a - // given subsystem - DT9812_STOP_SUBSYSTEM = 22, // Issue a stop command to a - // given subsystem - - DT9812_CALIBRATE_POT = 23, //calibrate the board using CAL_POT_CMD - DT9812_W_DAC_FIFO_SIZE = 24, // set the DAC FIFO size - DT9812_W_CGL_DAC = 25, // Write (or Clear) the CGL for the DAC - DT9812_R_SINGLE_VALUE_CMD = 26, // Read a single value from a subsystem - DT9812_W_SINGLE_VALUE_CMD = 27, // Write a single value to a subsystem - DT9812_MAX_USB_FIRMWARE_CMD_CODE // Valid DT9812_USB_FIRMWARE_CMD_CODE's - // will be less than this number + /* Write Flash memory */ + DT9812_W_FLASH_DATA = 0, + /* Read Flash memory misc config info */ + DT9812_R_FLASH_DATA = 1, + + /* + * Register read/write commands for processor + */ + + /* Read a single byte of USB memory */ + DT9812_R_SINGLE_BYTE_REG = 2, + /* Write a single byte of USB memory */ + DT9812_W_SINGLE_BYTE_REG = 3, + /* Multiple Reads of USB memory */ + DT9812_R_MULTI_BYTE_REG = 4, + /* Multiple Writes of USB memory */ + DT9812_W_MULTI_BYTE_REG = 5, + /* Read, (AND) with mask, OR value, then write (single) */ + DT9812_RMW_SINGLE_BYTE_REG = 6, + /* Read, (AND) with mask, OR value, then write (multiple) */ + DT9812_RMW_MULTI_BYTE_REG = 7, + + /* + * Register read/write commands for SMBus + */ + + /* Read a single byte of SMBus */ + DT9812_R_SINGLE_BYTE_SMBUS = 8, + /* Write a single byte of SMBus */ + DT9812_W_SINGLE_BYTE_SMBUS = 9, + /* Multiple Reads of SMBus */ + DT9812_R_MULTI_BYTE_SMBUS = 10, + /* Multiple Writes of SMBus */ + DT9812_W_MULTI_BYTE_SMBUS = 11, + + /* + * Register read/write commands for a device + */ + + /* Read a single byte of a device */ + DT9812_R_SINGLE_BYTE_DEV = 12, + /* Write a single byte of a device */ + DT9812_W_SINGLE_BYTE_DEV = 13, + /* Multiple Reads of a device */ + DT9812_R_MULTI_BYTE_DEV = 14, + /* Multiple Writes of a device */ + DT9812_W_MULTI_BYTE_DEV = 15, + + /* Not sure if we'll need this */ + DT9812_W_DAC_THRESHOLD = 16, + + /* Set interrupt on change mask */ + DT9812_W_INT_ON_CHANGE_MASK = 17, + + /* Write (or Clear) the CGL for the ADC */ + DT9812_W_CGL = 18, + /* Multiple Reads of USB memory */ + DT9812_R_MULTI_BYTE_USBMEM = 19, + /* Multiple Writes to USB memory */ + DT9812_W_MULTI_BYTE_USBMEM = 20, + + /* Issue a start command to a given subsystem */ + DT9812_START_SUBSYSTEM = 21, + /* Issue a stop command to a given subsystem */ + DT9812_STOP_SUBSYSTEM = 22, + + /* calibrate the board using CAL_POT_CMD */ + DT9812_CALIBRATE_POT = 23, + /* set the DAC FIFO size */ + DT9812_W_DAC_FIFO_SIZE = 24, + /* Write or Clear the CGL for the DAC */ + DT9812_W_CGL_DAC = 25, + /* Read a single value from a subsystem */ + DT9812_R_SINGLE_VALUE_CMD = 26, + /* Write a single value to a subsystem */ + DT9812_W_SINGLE_VALUE_CMD = 27, + /* Valid DT9812_USB_FIRMWARE_CMD_CODE's will be less than this number */ + DT9812_MAX_USB_FIRMWARE_CMD_CODE, } dt9812_usb_firmware_cmd_t; typedef struct { -- 2.41.1