From e4f48861993294c27849076741eb0c090482560b Mon Sep 17 00:00:00 2001 From: Semih Hazar Date: Wed, 18 Jul 2007 00:35:56 -0400 Subject: [PATCH] Input: ads7846 - introduce sample settling delay The ads7846 driver has support for filtering, but when the chip gets deselected between samples this causes noise. This patch adds support for an optional settling delay time, so that two consecutive samples will be taken with the specified delay time apart. This ensures that the chip won't be deselected, so the noise won't appear. Filtering can still be done, but will have less work to do since each time a new sample is taken the same delay applies. Signed-off-by: Semih Hazar Signed-off-by: David Brownell Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/ads7846.c | 65 ++++++++++++++++++++++++++++- include/linux/spi/ads7846.h | 8 ++++ 2 files changed, 72 insertions(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 1c9069cd3ba..103ee6ad299 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -95,7 +95,7 @@ struct ads7846 { u16 dummy; /* for the pwrdown read */ struct ts_event tc; - struct spi_transfer xfer[10]; + struct spi_transfer xfer[18]; struct spi_message msg[5]; struct spi_message *last_msg; int msg_idx; @@ -936,6 +936,24 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* the first sample after switching drivers can be low quality; + * optionally discard it, using a second one after the signals + * have had enough time to stabilize. + */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_y; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.y; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -954,6 +972,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_x; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.x; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -973,6 +1006,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_z1; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.z1; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; @@ -990,6 +1038,21 @@ static int __devinit ads7846_probe(struct spi_device *spi) x->len = 2; spi_message_add_tail(x, m); + /* ... maybe discard first sample ... */ + if (pdata->settle_delay_usecs) { + x->delay_usecs = pdata->settle_delay_usecs; + + x++; + x->tx_buf = &ts->read_z2; + x->len = 1; + spi_message_add_tail(x, m); + + x++; + x->rx_buf = &ts->tc.z2; + x->len = 2; + spi_message_add_tail(x, m); + } + m->complete = ads7846_rx_val; m->context = ts; } diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 3387e44dfd1..a44fa7a02bd 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -16,6 +16,14 @@ struct ads7846_platform_data { u16 vref_delay_usecs; /* 0 for external vref; etc */ int keep_vref_on:1; /* set to keep vref on for differential * measurements as well */ + + /* Settling time of the analog signals; a function of Vcc and the + * capacitance on the X/Y drivers. If set to non-zero, two samples + * are taken with settle_delay us apart, and the second one is used. + * ~150 uSec with 0.01uF caps. + */ + u16 settle_delay_usecs; + u16 x_plate_ohms; u16 y_plate_ohms; -- 2.41.1