From dfcffa467b4112fa6f1631c9d6bf7759c3bbe75a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 6 Feb 2008 01:39:24 -0800 Subject: [PATCH] sm501fb: control panel pin usage with platform data flags This patch makes it possible to control panel pins usage with flags passed from the platform data. Without this patch the sm501fb driver always controls the VBIASEN and FPEN pins. The polarity and use of these pins are very platform specific, so this patch introduces the flags SM501FB_FLAG_PANEL_USE_VBIASEN and SM501FB_FLAG_PANEL_USE_FPEN which enable the use of these pins. This patch is needed to support the a Sharp LQ104V1DG21 lcd panel on SuperH platforms such as R2D-1 and R2D-PLUS boards. Letting the sm501fb driver control the FPEN and VBIASEN pins like today just results in lcd panel flicker. Signed-off-by: Magnus Damm Cc: "Antonino A. Daplas" Cc: Paul Mundt Cc: Ben Dooks Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/video/sm501fb.c | 41 +++++++++++++++++++++++++---------------- include/linux/sm501.h | 2 ++ 2 files changed, 27 insertions(+), 16 deletions(-) diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 58f200c69be..e1d6085bc34 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -641,6 +641,7 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) { unsigned long control; void __iomem *ctrl_reg = fbi->regs + SM501_DC_PANEL_CONTROL; + struct sm501_platdata_fbsub *pd = fbi->pdata->fb_pnl; control = readl(ctrl_reg); @@ -657,26 +658,34 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) sm501fb_sync_regs(fbi); mdelay(10); - control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ - writel(control, ctrl_reg); - sm501fb_sync_regs(fbi); - mdelay(10); - - control |= SM501_DC_PANEL_CONTROL_FPEN; - writel(control, ctrl_reg); + if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ + writel(control, ctrl_reg); + sm501fb_sync_regs(fbi); + mdelay(10); + } + if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + control |= SM501_DC_PANEL_CONTROL_FPEN; + writel(control, ctrl_reg); + sm501fb_sync_regs(fbi); + mdelay(10); + } } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) { /* disable panel power */ + if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + control &= ~SM501_DC_PANEL_CONTROL_FPEN; + writel(control, ctrl_reg); + sm501fb_sync_regs(fbi); + mdelay(10); + } - control &= ~SM501_DC_PANEL_CONTROL_FPEN; - writel(control, ctrl_reg); - sm501fb_sync_regs(fbi); - mdelay(10); - - control &= ~SM501_DC_PANEL_CONTROL_BIAS; - writel(control, ctrl_reg); - sm501fb_sync_regs(fbi); - mdelay(10); + if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + control &= ~SM501_DC_PANEL_CONTROL_BIAS; + writel(control, ctrl_reg); + sm501fb_sync_regs(fbi); + mdelay(10); + } control &= ~SM501_DC_PANEL_CONTROL_DATA; writel(control, ctrl_reg); diff --git a/include/linux/sm501.h b/include/linux/sm501.h index 9e3aaad6fe4..932a9efee8a 100644 --- a/include/linux/sm501.h +++ b/include/linux/sm501.h @@ -70,6 +70,8 @@ extern unsigned long sm501_gpio_get(struct device *dev, #define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1) #define SM501FB_FLAG_USE_HWCURSOR (1<<2) #define SM501FB_FLAG_USE_HWACCEL (1<<3) +#define SM501FB_FLAG_PANEL_USE_FPEN (1<<4) +#define SM501FB_FLAG_PANEL_USE_VBIASEN (1<<5) struct sm501_platdata_fbsub { struct fb_videomode *def_mode; -- 2.41.1