From df950828b0ee51ff63c49c67d561bfd3d6096788 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 13 Aug 2007 09:45:41 +0900 Subject: [PATCH] dl2k: add Sundance/Tamarack TC902x Gigabit Ethernet Adapter support Actually, D-Link modified the VendorID/ProductID of the TC902x. The TC902x is the original chipset. Signed-off-by: Komuro Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 7 ++++--- drivers/net/dl2k.c | 23 +++++++++++++++-------- drivers/net/dl2k.h | 1 + 3 files changed, 20 insertions(+), 11 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 502dd0eb880..eeac2f49aae 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1995,14 +1995,15 @@ config ACENIC_OMIT_TIGON_I The safe and default value for this is N. config DL2K - tristate "D-Link DL2000-based Gigabit Ethernet support" + tristate "DL2000/TC902x-based Gigabit Ethernet support" depends on PCI select CRC32 help - This driver supports D-Link 2000-based gigabit ethernet cards, which - includes + This driver supports DL2000/TC902x-based Gigabit ethernet cards, + which includes D-Link DGE-550T Gigabit Ethernet Adapter. D-Link DL2000-based Gigabit Ethernet Adapter. + Sundance/Tamarack TC902x Gigabit Ethernet Adapter. To compile this driver as a module, choose M here: the module will be called dl2k. diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c index 04e3710c908..ca21a1888ff 100644 --- a/drivers/net/dl2k.c +++ b/drivers/net/dl2k.c @@ -10,9 +10,9 @@ (at your option) any later version. */ -#define DRV_NAME "D-Link DL2000-based linux driver" -#define DRV_VERSION "v1.18" -#define DRV_RELDATE "2006/06/27" +#define DRV_NAME "DL2000/TC902x-based linux driver" +#define DRV_VERSION "v1.19" +#define DRV_RELDATE "2007/08/12" #include "dl2k.h" #include @@ -339,17 +339,24 @@ parse_eeprom (struct net_device *dev) #ifdef MEM_MAPPING ioaddr = dev->base_addr; #endif - /* Check CRC */ - crc = ~ether_crc_le (256 - 4, sromdata); - if (psrom->crc != crc) { - printk (KERN_ERR "%s: EEPROM data CRC error.\n", dev->name); - return -1; + if (np->pdev->vendor == PCI_VENDOR_ID_DLINK) { /* D-Link Only */ + /* Check CRC */ + crc = ~ether_crc_le (256 - 4, sromdata); + if (psrom->crc != crc) { + printk (KERN_ERR "%s: EEPROM data CRC error.\n", + dev->name); + return -1; + } } /* Set MAC address */ for (i = 0; i < 6; i++) dev->dev_addr[i] = psrom->mac_addr[i]; + if (np->pdev->vendor != PCI_VENDOR_ID_DLINK) { + return 0; + } + /* Parse Software Information Block */ i = 0x30; psib = (u8 *) sromdata; diff --git a/drivers/net/dl2k.h b/drivers/net/dl2k.h index e443065a452..5b801775f42 100644 --- a/drivers/net/dl2k.h +++ b/drivers/net/dl2k.h @@ -692,6 +692,7 @@ struct netdev_private { static const struct pci_device_id rio_pci_tbl[] = { {0x1186, 0x4000, PCI_ANY_ID, PCI_ANY_ID, }, + {0x13f0, 0x1021, PCI_ANY_ID, PCI_ANY_ID, }, { } }; MODULE_DEVICE_TABLE (pci, rio_pci_tbl); -- 2.41.1