From db053b86f4b1ec790da2dafe2acb93be76288bb9 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 2 Oct 2008 16:41:31 -0700 Subject: [PATCH] xen: clean up x86-64 warnings There are a couple of Xen features which rely on directly accessing per-cpu data via a segment register, which is not yet available on x86-64. In the meantime, just disable direct access to the vcpu info structure; this leaves some of the code as dead, but it will come to life in time, and the warnings are suppressed. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar --- arch/x86/xen/enlighten.c | 61 +++++++-------------------------------- arch/x86/xen/xen-asm_64.S | 20 +++++++++++-- 2 files changed, 27 insertions(+), 54 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 8ca2f88bde1..85692c9f649 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -112,7 +112,14 @@ struct shared_info *HYPERVISOR_shared_info = (void *)&xen_dummy_shared_info; * * 0: not available, 1: available */ -static int have_vcpu_info_placement = 1; +static int have_vcpu_info_placement = +#ifdef CONFIG_X86_32 + 1 +#else + 0 +#endif + ; + static void xen_vcpu_setup(int cpu) { @@ -941,6 +948,7 @@ static void *xen_kmap_atomic_pte(struct page *page, enum km_type type) } #endif +#ifdef CONFIG_X86_32 static __init pte_t mask_rw_pte(pte_t *ptep, pte_t pte) { /* If there's an existing pte, then don't allow _PAGE_RW to be set */ @@ -959,6 +967,7 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) xen_set_pte(ptep, pte); } +#endif static __init void xen_pagetable_setup_start(pgd_t *base) { @@ -1025,7 +1034,6 @@ void xen_setup_vcpu_info_placement(void) /* xen_vcpu_setup managed to place the vcpu_info within the percpu area for all cpus, so make use of it */ -#ifdef CONFIG_X86_32 if (have_vcpu_info_placement) { printk(KERN_INFO "Xen: using vcpu_info placement\n"); @@ -1035,7 +1043,6 @@ void xen_setup_vcpu_info_placement(void) pv_irq_ops.irq_enable = xen_irq_enable_direct; pv_mmu_ops.read_cr2 = xen_read_cr2_direct; } -#endif } static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf, @@ -1056,12 +1063,10 @@ static unsigned xen_patch(u8 type, u16 clobbers, void *insnbuf, goto patch_site switch (type) { -#ifdef CONFIG_X86_32 SITE(pv_irq_ops, irq_enable); SITE(pv_irq_ops, irq_disable); SITE(pv_irq_ops, save_fl); SITE(pv_irq_ops, restore_fl); -#endif /* CONFIG_X86_32 */ #undef SITE patch_site: @@ -1399,48 +1404,11 @@ static void *m2v(phys_addr_t maddr) return __ka(m2p(maddr)); } -#ifdef CONFIG_X86_64 -static void walk(pgd_t *pgd, unsigned long addr) -{ - unsigned l4idx = pgd_index(addr); - unsigned l3idx = pud_index(addr); - unsigned l2idx = pmd_index(addr); - unsigned l1idx = pte_index(addr); - pgd_t l4; - pud_t l3; - pmd_t l2; - pte_t l1; - - xen_raw_printk("walk %p, %lx -> %d %d %d %d\n", - pgd, addr, l4idx, l3idx, l2idx, l1idx); - - l4 = pgd[l4idx]; - xen_raw_printk(" l4: %016lx\n", l4.pgd); - xen_raw_printk(" %016lx\n", pgd_val(l4)); - - l3 = ((pud_t *)(m2v(l4.pgd)))[l3idx]; - xen_raw_printk(" l3: %016lx\n", l3.pud); - xen_raw_printk(" %016lx\n", pud_val(l3)); - - l2 = ((pmd_t *)(m2v(l3.pud)))[l2idx]; - xen_raw_printk(" l2: %016lx\n", l2.pmd); - xen_raw_printk(" %016lx\n", pmd_val(l2)); - - l1 = ((pte_t *)(m2v(l2.pmd)))[l1idx]; - xen_raw_printk(" l1: %016lx\n", l1.pte); - xen_raw_printk(" %016lx\n", pte_val(l1)); -} -#endif - static void set_page_prot(void *addr, pgprot_t prot) { unsigned long pfn = __pa(addr) >> PAGE_SHIFT; pte_t pte = pfn_pte(pfn, prot); - xen_raw_printk("addr=%p pfn=%lx mfn=%lx prot=%016llx pte=%016llx\n", - addr, pfn, get_phys_to_machine(pfn), - pgprot_val(prot), pte.pte); - if (HYPERVISOR_update_va_mapping((unsigned long)addr, pte, 0)) BUG(); } @@ -1698,15 +1666,6 @@ asmlinkage void __init xen_start_kernel(void) xen_raw_console_write("about to get started...\n"); -#if 0 - xen_raw_printk("&boot_params=%p __pa(&boot_params)=%lx __va(__pa(&boot_params))=%lx\n", - &boot_params, __pa_symbol(&boot_params), - __va(__pa_symbol(&boot_params))); - - walk(pgd, &boot_params); - walk(pgd, __va(__pa(&boot_params))); -#endif - /* Start the world */ #ifdef CONFIG_X86_32 i386_start_kernel(); diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S index 3b9bda46487..05794c566e8 100644 --- a/arch/x86/xen/xen-asm_64.S +++ b/arch/x86/xen/xen-asm_64.S @@ -26,8 +26,15 @@ /* Pseudo-flag used for virtual NMI, which we don't implement yet */ #define XEN_EFLAGS_NMI 0x80000000 -#if 0 -#include +#if 1 +/* + x86-64 does not yet support direct access to percpu variables + via a segment override, so we just need to make sure this code + never gets used + */ +#define BUG ud2a +#define PER_CPU_VAR(var, off) 0xdeadbeef +#endif /* Enable events. This clears the event mask and tests the pending @@ -35,6 +42,8 @@ events, then enter the hypervisor to get them handled. */ ENTRY(xen_irq_enable_direct) + BUG + /* Unmask events */ movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) @@ -58,6 +67,8 @@ ENDPATCH(xen_irq_enable_direct) non-zero. */ ENTRY(xen_irq_disable_direct) + BUG + movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) ENDPATCH(xen_irq_disable_direct) ret @@ -74,6 +85,8 @@ ENDPATCH(xen_irq_disable_direct) Xen and x86 use opposite senses (mask vs enable). */ ENTRY(xen_save_fl_direct) + BUG + testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) setz %ah addb %ah,%ah @@ -91,6 +104,8 @@ ENDPATCH(xen_save_fl_direct) if so. */ ENTRY(xen_restore_fl_direct) + BUG + testb $X86_EFLAGS_IF>>8, %ah setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) /* Preempt here doesn't matter because that will deal with @@ -133,7 +148,6 @@ check_events: pop %rcx pop %rax ret -#endif ENTRY(xen_adjust_exception_frame) mov 8+0(%rsp),%rcx -- 2.41.1