From d2f26037a38ada4a5d40d1cf0b32bc5289f50312 Mon Sep 17 00:00:00 2001 From: KOVACS Krisztian Date: Wed, 8 Oct 2008 11:35:12 +0200 Subject: [PATCH] netfilter: Add documentation for tproxy Add basic usage instructions to Documentation/networking. Signed-off-by: KOVACS Krisztian Signed-off-by: Patrick McHardy --- Documentation/networking/tproxy.txt | 85 +++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) create mode 100644 Documentation/networking/tproxy.txt diff --git a/Documentation/networking/tproxy.txt b/Documentation/networking/tproxy.txt new file mode 100644 index 00000000000..7b5996d9357 --- /dev/null +++ b/Documentation/networking/tproxy.txt @@ -0,0 +1,85 @@ +Transparent proxy support +========================= + +This feature adds Linux 2.2-like transparent proxy support to current kernels. +To use it, enable NETFILTER_TPROXY, the socket match and the TPROXY target in +your kernel config. You will need policy routing too, so be sure to enable that +as well. + + +1. Making non-local sockets work +================================ + +The idea is that you identify packets with destination address matching a local +socket on your box, set the packet mark to a certain value, and then match on that +value using policy routing to have those packets delivered locally: + +# iptables -t mangle -N DIVERT +# iptables -t mangle -A PREROUTING -p tcp -m socket -j DIVERT +# iptables -t mangle -A DIVERT -j MARK --set-mark 1 +# iptables -t mangle -A DIVERT -j ACCEPT + +# ip rule add fwmark 1 lookup 100 +# ip route add local 0.0.0.0/0 dev lo table 100 + +Because of certain restrictions in the IPv4 routing output code you'll have to +modify your application to allow it to send datagrams _from_ non-local IP +addresses. All you have to do is enable the (SOL_IP, IP_TRANSPARENT) socket +option before calling bind: + +fd = socket(AF_INET, SOCK_STREAM, 0); +/* - 8< -*/ +int value = 1; +setsockopt(fd, SOL_IP, IP_TRANSPARENT, &value, sizeof(value)); +/* - 8< -*/ +name.sin_family = AF_INET; +name.sin_port = htons(0xCAFE); +name.sin_addr.s_addr = htonl(0xDEADBEEF); +bind(fd, &name, sizeof(name)); + +A trivial patch for netcat is available here: +http://people.netfilter.org/hidden/tproxy/netcat-ip_transparent-support.patch + + +2. Redirecting traffic +====================== + +Transparent proxying often involves "intercepting" traffic on a router. This is +usually done with the iptables REDIRECT target; however, there are serious +limitations of that method. One of the major issues is that it actually +modifies the packets to change the destination address -- which might not be +acceptable in certain situations. (Think of proxying UDP for example: you won't +be able to find out the original destination address. Even in case of TCP +getting the original destination address is racy.) + +The 'TPROXY' target provides similar functionality without relying on NAT. Simply +add rules like this to the iptables ruleset above: + +# iptables -t mangle -A PREROUTING -p tcp --dport 80 -j TPROXY \ + --tproxy-mark 0x1/0x1 --on-port 50080 + +Note that for this to work you'll have to modify the proxy to enable (SOL_IP, +IP_TRANSPARENT) for the listening socket. + + +3. Iptables extensions +====================== + +To use tproxy you'll need to have the 'socket' and 'TPROXY' modules +compiled for iptables. A patched version of iptables is available +here: http://git.balabit.hu/?p=bazsi/iptables-tproxy.git + + +4. Application support +====================== + +4.1. Squid +---------- + +Squid 3.HEAD has support built-in. To use it, pass +'--enable-linux-netfilter' to configure and set the 'tproxy' option on +the HTTP listener you redirect traffic to with the TPROXY iptables +target. + +For more information please consult the following page on the Squid +wiki: http://wiki.squid-cache.org/Features/Tproxy4 -- 2.41.1