From cf821e8f53e3d147ebae03c8c710d2b8842d88a1 Mon Sep 17 00:00:00 2001 From: Alex Dubov Date: Wed, 19 Mar 2008 17:01:08 -0700 Subject: [PATCH] memstick: optimize setup of JMicron host parameters Set correct clock management values to improve over-all performance. Signed-off-by: Alex Dubov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/memstick/host/jmb38x_ms.c | 60 +++++++++++++++---------------- 1 file changed, 30 insertions(+), 30 deletions(-) diff --git a/drivers/memstick/host/jmb38x_ms.c b/drivers/memstick/host/jmb38x_ms.c index f91037d5042..8770a5fac3b 100644 --- a/drivers/memstick/host/jmb38x_ms.c +++ b/drivers/memstick/host/jmb38x_ms.c @@ -131,6 +131,12 @@ struct jmb38x_ms { #define PAD_PU_PD_ON_MS_SOCK0 0x5f8f0000 #define PAD_PU_PD_ON_MS_SOCK1 0x0f0f0000 +#define CLOCK_CONTROL_40MHZ 0x00000001 +#define CLOCK_CONTROL_50MHZ 0x00000002 +#define CLOCK_CONTROL_60MHZ 0x00000008 +#define CLOCK_CONTROL_62_5MHZ 0x0000000c +#define CLOCK_CONTROL_OFF 0x00000000 + enum { CMD_READY = 0x01, FIFO_READY = 0x02, @@ -607,19 +613,18 @@ static void jmb38x_ms_reset(struct jmb38x_ms_host *host) { unsigned int host_ctl = readl(host->addr + HOST_CONTROL); - writel(host_ctl | HOST_CONTROL_RESET_REQ | HOST_CONTROL_RESET, - host->addr + HOST_CONTROL); + writel(HOST_CONTROL_RESET_REQ, host->addr + HOST_CONTROL); while (HOST_CONTROL_RESET_REQ & (host_ctl = readl(host->addr + HOST_CONTROL))) { - ndelay(100); - dev_dbg(&host->chip->pdev->dev, "reset\n"); + ndelay(20); + dev_dbg(&host->chip->pdev->dev, "reset %08x\n", host_ctl); } - writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE); + writel(HOST_CONTROL_RESET, host->addr + HOST_CONTROL); + mmiowb(); writel(INT_STATUS_ALL, host->addr + INT_SIGNAL_ENABLE); - - dev_dbg(&host->chip->pdev->dev, "reset\n"); + writel(INT_STATUS_ALL, host->addr + INT_STATUS_ENABLE); } static void jmb38x_ms_set_param(struct memstick_host *msh, @@ -627,10 +632,8 @@ static void jmb38x_ms_set_param(struct memstick_host *msh, int value) { struct jmb38x_ms_host *host = memstick_priv(msh); - unsigned int host_ctl; - unsigned long flags; - - spin_lock_irqsave(&host->lock, flags); + unsigned int host_ctl = readl(host->addr + HOST_CONTROL); + unsigned int clock_ctl = CLOCK_CONTROL_40MHZ, clock_delay = 0; switch (param) { case MEMSTICK_POWER: @@ -638,60 +641,57 @@ static void jmb38x_ms_set_param(struct memstick_host *msh, jmb38x_ms_reset(host); writel(host->id ? PAD_PU_PD_ON_MS_SOCK1 - : PAD_PU_PD_ON_MS_SOCK0, + : PAD_PU_PD_ON_MS_SOCK0, host->addr + PAD_PU_PD); writel(PAD_OUTPUT_ENABLE_MS, host->addr + PAD_OUTPUT_ENABLE); - host_ctl = readl(host->addr + HOST_CONTROL); - host_ctl |= 7; - writel(host_ctl | (HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN), - host->addr + HOST_CONTROL); + host_ctl = 7; + host_ctl |= HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN; + writel(host_ctl, host->addr + HOST_CONTROL); dev_dbg(&host->chip->pdev->dev, "power on\n"); } else if (value == MEMSTICK_POWER_OFF) { - writel(readl(host->addr + HOST_CONTROL) - & ~(HOST_CONTROL_POWER_EN - | HOST_CONTROL_CLOCK_EN), - host->addr + HOST_CONTROL); + host_ctl &= ~(HOST_CONTROL_POWER_EN + | HOST_CONTROL_CLOCK_EN); + writel(host_ctl, host->addr + HOST_CONTROL); writel(0, host->addr + PAD_OUTPUT_ENABLE); writel(PAD_PU_PD_OFF, host->addr + PAD_PU_PD); dev_dbg(&host->chip->pdev->dev, "power off\n"); } break; case MEMSTICK_INTERFACE: - /* jmb38x_ms_reset(host); */ - - host_ctl = readl(host->addr + HOST_CONTROL); host_ctl &= ~(3 << HOST_CONTROL_IF_SHIFT); - /* host_ctl |= 7; */ if (value == MEMSTICK_SERIAL) { host_ctl &= ~HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_SERIAL << HOST_CONTROL_IF_SHIFT; host_ctl |= HOST_CONTROL_REI; - writel(0, host->addr + CLOCK_DELAY); + clock_ctl = CLOCK_CONTROL_40MHZ; + clock_delay = 0; } else if (value == MEMSTICK_PAR4) { host_ctl |= HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_PAR4 << HOST_CONTROL_IF_SHIFT; host_ctl &= ~HOST_CONTROL_REI; - writel(4, host->addr + CLOCK_DELAY); + clock_ctl = CLOCK_CONTROL_40MHZ; + clock_delay = 4; } else if (value == MEMSTICK_PAR8) { host_ctl |= HOST_CONTROL_FAST_CLK; host_ctl |= HOST_CONTROL_IF_PAR8 << HOST_CONTROL_IF_SHIFT; host_ctl &= ~HOST_CONTROL_REI; - writel(4, host->addr + CLOCK_DELAY); + clock_ctl = CLOCK_CONTROL_60MHZ; + clock_delay = 0; } writel(host_ctl, host->addr + HOST_CONTROL); + writel(clock_ctl, host->addr + CLOCK_CONTROL); + writel(clock_delay, host->addr + CLOCK_DELAY); break; }; - - spin_unlock_irqrestore(&host->lock, flags); } #ifdef CONFIG_PM -- 2.41.1