From ceb1b2c583a9503e3ae68c4e7c652637971e3768 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 25 Jan 2008 22:17:04 +0100 Subject: [PATCH] hpt366: change timing register masks Since PIO autotuning is now done always, there's no need anymore to program the taskfile timings also on DMA modes, so change the IDE timing register masks accordingly, "inverting the polarity" of the masks while at it... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/hpt366.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 9fce25bdec8..edb267c78af 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/hpt366.c Version 1.22 Dec 4, 2007 + * linux/drivers/ide/pci/hpt366.c Version 1.23 Dec 7, 2007 * * Copyright (C) 1999-2003 Andre Hedrick * Portions Copyright (C) 2001 Sun Microsystems, Inc. @@ -689,19 +689,17 @@ static void hpt36x_set_mode(ide_drive_t *drive, const u8 speed) struct hpt_info *info = pci_get_drvdata(dev); u8 itr_addr = drive->dn ? 0x44 : 0x40; u32 old_itr = 0; - u32 itr_mask, new_itr; - - itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : - (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); - - new_itr = get_speed_setting(speed, info); + u32 new_itr = get_speed_setting(speed, info); + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xc1f8ffff : + (speed < XFER_UDMA_0 ? 0x303800ff : + 0x30070000); + pci_read_config_dword(dev, itr_addr, &old_itr); + new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); /* * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) * to avoid problems handling I/O errors later */ - pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); new_itr &= ~0xc0000000; pci_write_config_dword(dev, itr_addr, new_itr); @@ -714,16 +712,14 @@ static void hpt37x_set_mode(ide_drive_t *drive, const u8 speed) struct hpt_info *info = pci_get_drvdata(dev); u8 itr_addr = 0x40 + (drive->dn * 4); u32 old_itr = 0; - u32 itr_mask, new_itr; - - itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : - (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); - - new_itr = get_speed_setting(speed, info); + u32 new_itr = get_speed_setting(speed, info); + u32 itr_mask = speed < XFER_MW_DMA_0 ? 0xcfc3ffff : + (speed < XFER_UDMA_0 ? 0x31c001ff : + 0x303c0000); pci_read_config_dword(dev, itr_addr, &old_itr); - new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); - + new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask); + if (speed < XFER_MW_DMA_0) new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */ pci_write_config_dword(dev, itr_addr, new_itr); -- 2.41.1