From cc2bb6968a2c842149d285d77cb35200d2d37b15 Mon Sep 17 00:00:00 2001 From: Zhang Wei Date: Fri, 18 Apr 2008 13:33:41 -0700 Subject: [PATCH] [RAPIDIO] Add OF-tree support to RapidIO controller driver This initializes the RapidIO controller driver using addresses and interrupt numbers obtained from the firmware device tree, rather than using hardcoded constants. Signed-off-by: Zhang Wei Signed-off-by: Andrew Morton Signed-off-by: Paul Mackerras --- arch/powerpc/kernel/Makefile | 1 - arch/powerpc/kernel/rio.c | 52 ---------------- arch/powerpc/sysdev/fsl_rio.c | 110 +++++++++++++++++++++++++++++++--- arch/powerpc/sysdev/fsl_rio.h | 20 ------- 4 files changed, 102 insertions(+), 81 deletions(-) delete mode 100644 arch/powerpc/kernel/rio.c delete mode 100644 arch/powerpc/sysdev/fsl_rio.h diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9177b21b1a9..d14cebf62bb 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -73,7 +73,6 @@ pci64-$(CONFIG_PPC64) += pci_dn.o isa-bridge.o obj-$(CONFIG_PCI) += pci_$(CONFIG_WORD_SIZE).o $(pci64-y) \ pci-common.o obj-$(CONFIG_PCI_MSI) += msi.o -obj-$(CONFIG_RAPIDIO) += rio.o obj-$(CONFIG_KEXEC) += machine_kexec.o crash.o \ machine_kexec_$(CONFIG_WORD_SIZE).o obj-$(CONFIG_AUDIT) += audit.o diff --git a/arch/powerpc/kernel/rio.c b/arch/powerpc/kernel/rio.c deleted file mode 100644 index 29487fedfc7..00000000000 --- a/arch/powerpc/kernel/rio.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * RapidIO PPC32 support - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include - -#include - -/** - * platform_rio_init - Do platform specific RIO init - * - * Any platform specific initialization of RapdIO - * hardware is done here as well as registration - * of any active master ports in the system. - */ -void __attribute__ ((weak)) - platform_rio_init(void) -{ - printk(KERN_WARNING "RIO: No platform_rio_init() present\n"); -} - -/** - * ppc_rio_init - Do PPC32 RIO init - * - * Calls platform-specific RIO init code and then calls - * rio_init_mports() to initialize any master ports that - * have been registered with the RIO subsystem. - */ -static int __init ppc_rio_init(void) -{ - printk(KERN_INFO "RIO: RapidIO init\n"); - - /* Platform specific initialization */ - platform_rio_init(); - - /* Enumerate all registered ports */ - rio_init_mports(); - - return 0; -} - -subsys_initcall(ppc_rio_init); diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 80acc794019..d2d14708e71 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -20,6 +20,7 @@ #include #include #include +#include #include @@ -28,7 +29,6 @@ #define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq) #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) -#define RIO_REGS_BASE (CCSRBAR + 0xc0000) #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_MSG_REGS_OFFSET 0x11000 #define RIO_MAINT_WIN_SIZE 0x400000 @@ -905,19 +905,66 @@ __setup("riohdid=", fsl_rio_get_cmdline); /** * fsl_rio_setup - Setup MPC85xx RapidIO interface - * @law_start: Starting physical address of RapidIO LAW - * @law_size: Size of RapidIO LAW + * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface * * Initializes MPC85xx RapidIO hardware interface, configures * master port with system-specific info, and registers the * master port with the RapidIO subsystem. */ -void fsl_rio_setup(int law_start, int law_size) +int fsl_rio_setup(struct of_device *dev) { struct rio_ops *ops; struct rio_mport *port; - struct rio_priv *priv = NULL; - int rc; + struct rio_priv *priv; + int rc = 0; + const u32 *dt_range, *cell; + struct resource regs; + int rlen; + u64 law_start, law_size; + int paw, aw, sw; + + if (!dev->node) { + dev_err(&dev->dev, "Device OF-Node is NULL"); + return -EFAULT; + } + + rc = of_address_to_resource(dev->node, 0, ®s); + if (rc) { + dev_err(&dev->dev, "Can't get %s property 'reg'\n", + dev->node->full_name); + return -EFAULT; + } + dev_info(&dev->dev, "Of-device full name %s\n", dev->node->full_name); + dev_info(&dev->dev, "Regs start 0x%08x size 0x%08x\n", regs.start, + regs.end - regs.start + 1); + + dt_range = of_get_property(dev->node, "ranges", &rlen); + if (!dt_range) { + dev_err(&dev->dev, "Can't get %s property 'ranges'\n", + dev->node->full_name); + return -EFAULT; + } + + /* Get node address wide */ + cell = of_get_property(dev->node, "#address-cells", NULL); + if (cell) + aw = *cell; + else + aw = of_n_addr_cells(dev->node); + /* Get node size wide */ + cell = of_get_property(dev->node, "#size-cells", NULL); + if (cell) + sw = *cell; + else + sw = of_n_size_cells(dev->node); + /* Get parent address wide wide */ + paw = of_n_addr_cells(dev->node); + + law_start = of_read_number(dt_range + aw, paw); + law_size = of_read_number(dt_range + aw + paw, sw); + + dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n", + law_start, law_size); ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); ops->lcread = fsl_local_config_read; @@ -942,6 +989,12 @@ void fsl_rio_setup(int law_start, int law_size) port->iores.end = law_start + law_size; port->iores.flags = IORESOURCE_MEM; + priv->bellirq = irq_of_parse_and_map(dev->node, 2); + priv->txirq = irq_of_parse_and_map(dev->node, 3); + priv->rxirq = irq_of_parse_and_map(dev->node, 4); + dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq, + priv->txirq, priv->rxirq); + rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); @@ -953,7 +1006,7 @@ void fsl_rio_setup(int law_start, int law_size) port->priv = priv; rio_register_mport(port); - priv->regs_win = ioremap(RIO_REGS_BASE, 0x20000); + priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); priv->atmu_regs = (struct rio_atmu_regs *)(priv->regs_win + RIO_ATMU_REGS_OFFSET); priv->maint_atmu_regs = priv->atmu_regs + 1; @@ -972,10 +1025,51 @@ void fsl_rio_setup(int law_start, int law_size) out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); fsl_rio_doorbell_init(port); - return; + return 0; err: if (priv) iounmap(priv->regs_win); + kfree(ops); kfree(priv); kfree(port); + return rc; } + +/* The probe function for RapidIO peer-to-peer network. + */ +static int __devinit fsl_of_rio_rpn_probe(struct of_device *dev, + const struct of_device_id *match) +{ + int rc; + printk(KERN_INFO "Setting up RapidIO peer-to-peer network %s\n", + dev->node->full_name); + + rc = fsl_rio_setup(dev); + if (rc) + goto out; + + /* Enumerate all registered ports */ + rc = rio_init_mports(); +out: + return rc; +}; + +static const struct of_device_id fsl_of_rio_rpn_ids[] = { + { + .compatible = "fsl,rapidio-delta", + }, + {}, +}; + +static struct of_platform_driver fsl_of_rio_rpn_driver = { + .name = "fsl-of-rio", + .match_table = fsl_of_rio_rpn_ids, + .probe = fsl_of_rio_rpn_probe, +}; + +static __init int fsl_of_rio_rpn_init(void) +{ + return of_register_platform_driver(&fsl_of_rio_rpn_driver); +} + +subsys_initcall(fsl_of_rio_rpn_init); diff --git a/arch/powerpc/sysdev/fsl_rio.h b/arch/powerpc/sysdev/fsl_rio.h deleted file mode 100644 index 6d3ff30b157..00000000000 --- a/arch/powerpc/sysdev/fsl_rio.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * MPC85xx RapidIO definitions - * - * Copyright 2005 MontaVista Software, Inc. - * Matt Porter - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __PPC_SYSLIB_PPC85XX_RIO_H -#define __PPC_SYSLIB_PPC85XX_RIO_H - -#include - -extern void mpc85xx_rio_setup(int law_start, int law_size); - -#endif /* __PPC_SYSLIB_PPC85XX_RIO_H */ -- 2.41.1