From c3896d2ca4dd97be290f000cb1079ed759d28574 Mon Sep 17 00:00:00 2001 From: Luis Carlos Cobo Date: Sat, 23 Feb 2008 15:17:13 +0100 Subject: [PATCH] mac80211: mesh peer link implementation This file implements mesh discovery and peer link establishment support using the mesh peer link table provided in mesh_plinktbl.c. Secure peer links have not been implemented yet. Signed-off-by: Luis Carlos Cobo Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mesh_plink.c | 755 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 755 insertions(+) create mode 100644 net/mac80211/mesh_plink.c diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c new file mode 100644 index 00000000000..5cd97e99be6 --- /dev/null +++ b/net/mac80211/mesh_plink.c @@ -0,0 +1,755 @@ +/* + * Copyright (c) 2008 open80211s Ltd. + * Author: Luis Carlos Cobo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "ieee80211_i.h" +#include "ieee80211_rate.h" +#include "mesh.h" +#include + +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG +#define mpl_dbg(fmt, args...) printk(KERN_DEBUG fmt, ##args) +#else +#define mpl_dbg(fmt, args...) do { (void)(0); } while (0) +#endif + +#define IEEE80211_FC(type, stype) cpu_to_le16(type | stype) +#define PLINK_GET_FRAME_SUBTYPE(p) (p) +#define PLINK_GET_LLID(p) (p + 1) +#define PLINK_GET_PLID(p) (p + 3) + +#define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \ + jiffies + HZ * t / 1000)) + +/* Peer link cancel reasons, all subject to ANA approval */ +#define MESH_LINK_CANCELLED 2 +#define MESH_MAX_NEIGHBORS 3 +#define MESH_CAPABILITY_POLICY_VIOLATION 4 +#define MESH_CLOSE_RCVD 5 +#define MESH_MAX_RETRIES 6 +#define MESH_CONFIRM_TIMEOUT 7 +#define MESH_SECURITY_ROLE_NEGOTIATION_DIFFERS 8 +#define MESH_SECURITY_AUTHENTICATION_IMPOSSIBLE 9 +#define MESH_SECURITY_FAILED_VERIFICATION 10 + +#define dot11MeshMaxRetries(s) (s->u.sta.mshcfg.dot11MeshMaxRetries) +#define dot11MeshRetryTimeout(s) (s->u.sta.mshcfg.dot11MeshRetryTimeout) +#define dot11MeshConfirmTimeout(s) (s->u.sta.mshcfg.dot11MeshConfirmTimeout) +#define dot11MeshHoldingTimeout(s) (s->u.sta.mshcfg.dot11MeshHoldingTimeout) +#define dot11MeshMaxPeerLinks(s) (s->u.sta.mshcfg.dot11MeshMaxPeerLinks) + +enum plink_frame_type { + PLINK_OPEN = 0, + PLINK_CONFIRM, + PLINK_CLOSE +}; + +enum plink_event { + PLINK_UNDEFINED, + OPN_ACPT, + OPN_RJCT, + OPN_IGNR, + CNF_ACPT, + CNF_RJCT, + CNF_IGNR, + CLS_ACPT, + CLS_IGNR +}; + +static inline +void mesh_plink_inc_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_inc(&sdata->u.sta.mshstats.estab_plinks); + mesh_accept_plinks_update(sdata->dev); +} + +static inline +void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) +{ + atomic_dec(&sdata->u.sta.mshstats.estab_plinks); + mesh_accept_plinks_update(sdata->dev); +} + +/** + * mesh_plink_fsm_restart - restart a mesh peer link finite state machine + * + * @sta: mes peer link to restart + * + * Locking: this function must be called holding sta->plink_lock + */ +static inline void mesh_plink_fsm_restart(struct sta_info *sta) +{ + sta->plink_state = LISTEN; + sta->llid = sta->plid = sta->reason = sta->plink_retries = 0; +} + +/** + * mesh_plink_add - allocate and add a new mesh peer link + * + * @hw_addr: hardware address (ETH_ALEN length) + * @rates: rates the mesh peer supports + * @dev: local mesh interface + * + * The initial state of the new plink is set to LISTEN + * + * Returns: non-NULL on success, ERR_PTR() on error. + */ +struct sta_info *mesh_plink_add(u8 *hw_addr, u64 rates, struct net_device *dev) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sta_info *sta; + + if (memcmp(hw_addr, dev->dev_addr, ETH_ALEN) == 0) + /* never add ourselves as neighbours */ + return ERR_PTR(-EINVAL); + + if (is_multicast_ether_addr(hw_addr)) + return ERR_PTR(-EINVAL); + + if (local->num_sta >= MESH_MAX_PLINKS) + return ERR_PTR(-ENOSPC); + + sta = sta_info_add(local, dev, hw_addr, GFP_KERNEL); + if (IS_ERR(sta)) + return sta; + + sta->plink_state = LISTEN; + spin_lock_init(&sta->plink_lock); + init_timer(&sta->plink_timer); + sta->flags |= WLAN_STA_AUTHORIZED; + sta->supp_rates[local->hw.conf.channel->band] = rates; + rate_control_rate_init(sta, local); + + mesh_accept_plinks_update(dev); + + return sta; +} + +/** + * mesh_plink_deactivate - deactivate mesh peer link + * + * @sta: mesh peer link to deactivate + * + * All mesh paths with this peer as next hop will be flushed + * + * Locking: the caller must hold sta->plink_lock + */ +void mesh_plink_deactivate(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); + if (sta->plink_state == ESTAB) + mesh_plink_dec_estab_count(sdata); + sta->plink_state = BLOCKED; + mesh_path_flush_by_nexthop(sta); +} + +static int mesh_plink_frame_tx(struct net_device *dev, + enum plink_frame_type action, u8 *da, __le16 llid, __le16 plid, + __le16 reason) { + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sk_buff *skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); + struct ieee80211_mgmt *mgmt; + bool include_plid = false; + u8 *pos; + int ie_len; + + if (!skb) + return -1; + skb_reserve(skb, local->hw.extra_tx_headroom); + /* 25 is the size of the common mgmt part (24) plus the size of the + * common action part (1) + */ + mgmt = (struct ieee80211_mgmt *) + skb_put(skb, 25 + sizeof(mgmt->u.action.u.plink_action)); + memset(mgmt, 0, 25 + sizeof(mgmt->u.action.u.plink_action)); + mgmt->frame_control = IEEE80211_FC(IEEE80211_FTYPE_MGMT, + IEEE80211_STYPE_ACTION); + memcpy(mgmt->da, da, ETH_ALEN); + memcpy(mgmt->sa, dev->dev_addr, ETH_ALEN); + /* BSSID is left zeroed, wildcard value */ + mgmt->u.action.category = PLINK_CATEGORY; + mgmt->u.action.u.plink_action.action_code = action; + + if (action == PLINK_CLOSE) + mgmt->u.action.u.plink_action.aux = reason; + else { + mgmt->u.action.u.plink_action.aux = cpu_to_le16(0x0); + if (action == PLINK_CONFIRM) { + pos = skb_put(skb, 4); + /* two-byte status code followed by two-byte AID */ + memset(pos, 0, 4); + } + mesh_mgmt_ies_add(skb, dev); + } + + /* Add Peer Link Management element */ + switch (action) { + case PLINK_OPEN: + ie_len = 3; + break; + case PLINK_CONFIRM: + ie_len = 5; + include_plid = true; + break; + case PLINK_CLOSE: + default: + if (!plid) + ie_len = 5; + else { + ie_len = 7; + include_plid = true; + } + break; + } + + pos = skb_put(skb, 2 + ie_len); + *pos++ = WLAN_EID_PEER_LINK; + *pos++ = ie_len; + *pos++ = action; + memcpy(pos, &llid, 2); + if (include_plid) { + pos += 2; + memcpy(pos, &plid, 2); + } + if (action == PLINK_CLOSE) { + pos += 2; + memcpy(pos, &reason, 2); + } + + ieee80211_sta_tx(dev, skb, 0); + return 0; +} + +void mesh_neighbour_update(u8 *hw_addr, u64 rates, struct net_device *dev, + bool peer_accepting_plinks) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct sta_info *sta; + + sta = sta_info_get(local, hw_addr); + if (!sta) { + sta = mesh_plink_add(hw_addr, rates, dev); + if (IS_ERR(sta)) + return; + } + + sta->last_rx = jiffies; + sta->supp_rates[local->hw.conf.channel->band] = rates; + if (peer_accepting_plinks && sta->plink_state == LISTEN && + sdata->u.sta.accepting_plinks && + sdata->u.sta.mshcfg.auto_open_plinks) + mesh_plink_open(sta); + + sta_info_put(sta); +} + +static void mesh_plink_timer(unsigned long data) +{ + struct sta_info *sta; + __le16 llid, plid, reason; + struct net_device *dev = NULL; + struct ieee80211_sub_if_data *sdata; +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + DECLARE_MAC_BUF(mac); +#endif + + sta = (struct sta_info *) data; + + spin_lock_bh(&sta->plink_lock); + if (sta->ignore_plink_timer) { + sta->ignore_plink_timer = false; + spin_unlock_bh(&sta->plink_lock); + return; + } + mpl_dbg("Mesh plink timer for %s fired on state %d\n", + print_mac(mac, sta->addr), sta->plink_state); + reason = 0; + llid = sta->llid; + plid = sta->plid; + dev = sta->dev; + sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + switch (sta->plink_state) { + case OPN_RCVD: + case OPN_SNT: + /* retry timer */ + if (sta->plink_retries < dot11MeshMaxRetries(sdata)) { + u32 rand; + mpl_dbg("Mesh plink for %s (retry, timeout): %d %d\n", + print_mac(mac, sta->addr), + sta->plink_retries, sta->plink_timeout); + get_random_bytes(&rand, sizeof(u32)); + sta->plink_timeout = sta->plink_timeout + + rand % sta->plink_timeout; + ++sta->plink_retries; + if (!mod_plink_timer(sta, sta->plink_timeout)) + __sta_info_get(sta); + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid, + 0, 0); + break; + } + reason = cpu_to_le16(MESH_MAX_RETRIES); + /* fall through on else */ + case CNF_RCVD: + /* confirm timer */ + if (!reason) + reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT); + sta->plink_state = HOLDING; + if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) + __sta_info_get(sta); + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, plid, + reason); + break; + case HOLDING: + /* holding timer */ + if (del_timer(&sta->plink_timer)) + sta_info_put(sta); + mesh_plink_fsm_restart(sta); + spin_unlock_bh(&sta->plink_lock); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + + sta_info_put(sta); +} + +static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) +{ + sta->plink_timer.expires = jiffies + (HZ * timeout / 1000); + sta->plink_timer.data = (unsigned long) sta; + sta->plink_timer.function = mesh_plink_timer; + sta->plink_timeout = timeout; + __sta_info_get(sta); + add_timer(&sta->plink_timer); +} + +int mesh_plink_open(struct sta_info *sta) +{ + __le16 llid; + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + DECLARE_MAC_BUF(mac); +#endif + + spin_lock_bh(&sta->plink_lock); + get_random_bytes(&llid, 2); + sta->llid = llid; + if (sta->plink_state != LISTEN) { + spin_unlock_bh(&sta->plink_lock); + sta_info_put(sta); + return -EBUSY; + } + sta->plink_state = OPN_SNT; + mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata)); + spin_unlock_bh(&sta->plink_lock); + mpl_dbg("Mesh plink: starting establishment with %s\n", + print_mac(mac, sta->addr)); + + return mesh_plink_frame_tx(sta->dev, PLINK_OPEN, sta->addr, llid, 0, 0); +} + +void mesh_plink_block(struct sta_info *sta) +{ +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + DECLARE_MAC_BUF(mac); +#endif + + spin_lock_bh(&sta->plink_lock); + mesh_plink_deactivate(sta); + sta->plink_state = BLOCKED; + spin_unlock_bh(&sta->plink_lock); +} + +int mesh_plink_close(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(sta->dev); + int llid, plid, reason; +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + DECLARE_MAC_BUF(mac); +#endif + + mpl_dbg("Mesh plink: closing link with %s\n", + print_mac(mac, sta->addr)); + spin_lock_bh(&sta->plink_lock); + sta->reason = cpu_to_le16(MESH_LINK_CANCELLED); + reason = sta->reason; + + if (sta->plink_state == LISTEN || sta->plink_state == BLOCKED) { + mesh_plink_fsm_restart(sta); + spin_unlock_bh(&sta->plink_lock); + sta_info_put(sta); + return 0; + } else if (sta->plink_state == ESTAB) { + mesh_plink_deactivate(sta); + /* The timer should not be running */ + if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) + __sta_info_get(sta); + } else if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) + sta->ignore_plink_timer = true; + + sta->plink_state = HOLDING; + llid = sta->llid; + plid = sta->plid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(sta->dev, PLINK_CLOSE, sta->addr, llid, plid, + reason); + return 0; +} + +void mesh_rx_plink_frame(struct net_device *dev, struct ieee80211_mgmt *mgmt, + size_t len, struct ieee80211_rx_status *rx_status) +{ + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee802_11_elems elems; + struct sta_info *sta; + enum plink_event event; + enum plink_frame_type ftype; + size_t baselen; + u8 ie_len; + u8 *baseaddr; + __le16 plid, llid, reason; +#ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG + DECLARE_MAC_BUF(mac); +#endif + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + + if (is_multicast_ether_addr(mgmt->da)) { + mpl_dbg("Mesh plink: ignore frame from multicast address"); + return; + } + + baseaddr = mgmt->u.action.u.plink_action.variable; + baselen = (u8 *) mgmt->u.action.u.plink_action.variable - (u8 *) mgmt; + if (mgmt->u.action.u.plink_action.action_code == PLINK_CONFIRM) { + baseaddr += 4; + baselen -= 4; + } + ieee802_11_parse_elems(baseaddr, len - baselen, &elems); + if (!elems.peer_link) { + mpl_dbg("Mesh plink: missing necessary peer link ie\n"); + return; + } + + ftype = *((u8 *)PLINK_GET_FRAME_SUBTYPE(elems.peer_link)); + ie_len = elems.peer_link_len; + if ((ftype == PLINK_OPEN && ie_len != 3) || + (ftype == PLINK_CONFIRM && ie_len != 5) || + (ftype == PLINK_CLOSE && ie_len != 5 && ie_len != 7)) { + mpl_dbg("Mesh plink: incorrect plink ie length\n"); + return; + } + + if (ftype != PLINK_CLOSE && (!elems.mesh_id || !elems.mesh_config)) { + mpl_dbg("Mesh plink: missing necessary ie\n"); + return; + } + /* Note the lines below are correct, the llid in the frame is the plid + * from the point of view of this host. + */ + memcpy(&plid, PLINK_GET_LLID(elems.peer_link), 2); + if (ftype == PLINK_CONFIRM || (ftype == PLINK_CLOSE && ie_len == 7)) + memcpy(&llid, PLINK_GET_PLID(elems.peer_link), 2); + + sta = sta_info_get(local, mgmt->sa); + if (!sta && ftype != PLINK_OPEN) { + mpl_dbg("Mesh plink: cls or cnf from unknown peer\n"); + return; + } + + if (sta && sta->plink_state == BLOCKED) { + sta_info_put(sta); + return; + } + + /* Now we will figure out the appropriate event... */ + event = PLINK_UNDEFINED; + if (ftype != PLINK_CLOSE && (!mesh_matches_local(&elems, dev))) { + switch (ftype) { + case PLINK_OPEN: + event = OPN_RJCT; + break; + case PLINK_CONFIRM: + event = CNF_RJCT; + break; + case PLINK_CLOSE: + /* avoid warning */ + break; + } + spin_lock_bh(&sta->plink_lock); + } else if (!sta) { + /* ftype == PLINK_OPEN */ + u64 rates; + if (!mesh_plink_free_count(sdata)) { + mpl_dbg("Mesh plink error: no more free plinks\n"); + return; + } + + rates = ieee80211_sta_get_rates(local, &elems, rx_status->band); + sta = mesh_plink_add(mgmt->sa, rates, dev); + if (IS_ERR(sta)) { + mpl_dbg("Mesh plink error: plink table full\n"); + return; + } + event = OPN_ACPT; + spin_lock_bh(&sta->plink_lock); + } else { + spin_lock_bh(&sta->plink_lock); + switch (ftype) { + case PLINK_OPEN: + if (!mesh_plink_free_count(sdata) || + (sta->plid && sta->plid != plid)) + event = OPN_IGNR; + else + event = OPN_ACPT; + break; + case PLINK_CONFIRM: + if (!mesh_plink_free_count(sdata) || + (sta->llid != llid || sta->plid != plid)) + event = CNF_IGNR; + else + event = CNF_ACPT; + break; + case PLINK_CLOSE: + if (sta->plink_state == ESTAB) + /* Do not check for llid or plid. This does not + * follow the standard but since multiple plinks + * per sta are not supported, it is necessary in + * order to avoid a livelock when MP A sees an + * establish peer link to MP B but MP B does not + * see it. This can be caused by a timeout in + * B's peer link establishment or B beign + * restarted. + */ + event = CLS_ACPT; + else if (sta->plid != plid) + event = CLS_IGNR; + else if (ie_len == 7 && sta->llid != llid) + event = CLS_IGNR; + else + event = CLS_ACPT; + break; + default: + mpl_dbg("Mesh plink: unknown frame subtype\n"); + spin_unlock_bh(&sta->plink_lock); + sta_info_put(sta); + return; + } + } + + mpl_dbg("Mesh plink (peer, state, llid, plid, event): %s %d %d %d %d\n", + print_mac(mac, mgmt->sa), sta->plink_state, + __le16_to_cpu(sta->llid), __le16_to_cpu(sta->plid), + event); + reason = 0; + switch (sta->plink_state) { + /* spin_unlock as soon as state is updated at each case */ + case LISTEN: + switch (event) { + case CLS_ACPT: + mesh_plink_fsm_restart(sta); + spin_unlock_bh(&sta->plink_lock); + break; + case OPN_ACPT: + sta->plink_state = OPN_RCVD; + sta->plid = plid; + get_random_bytes(&llid, 2); + sta->llid = llid; + mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata)); + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_OPEN, sta->addr, llid, + 0, 0); + mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, + llid, plid, 0); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + break; + + case OPN_SNT: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); + case CLS_ACPT: + if (!reason) + reason = cpu_to_le16(MESH_CLOSE_RCVD); + sta->reason = reason; + sta->plink_state = HOLDING; + if (!mod_plink_timer(sta, + dot11MeshHoldingTimeout(sdata))) + sta->ignore_plink_timer = true; + + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, + plid, reason); + break; + case OPN_ACPT: + /* retry timer is left untouched */ + sta->plink_state = OPN_RCVD; + sta->plid = plid; + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid, + plid, 0); + break; + case CNF_ACPT: + sta->plink_state = CNF_RCVD; + if (!mod_plink_timer(sta, + dot11MeshConfirmTimeout(sdata))) + sta->ignore_plink_timer = true; + + spin_unlock_bh(&sta->plink_lock); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + break; + + case OPN_RCVD: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); + case CLS_ACPT: + if (!reason) + reason = cpu_to_le16(MESH_CLOSE_RCVD); + sta->reason = reason; + sta->plink_state = HOLDING; + if (!mod_plink_timer(sta, + dot11MeshHoldingTimeout(sdata))) + sta->ignore_plink_timer = true; + + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, + plid, reason); + break; + case OPN_ACPT: + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid, + plid, 0); + break; + case CNF_ACPT: + if (del_timer(&sta->plink_timer)) + sta_info_put(sta); + sta->plink_state = ESTAB; + mesh_plink_inc_estab_count(sdata); + spin_unlock_bh(&sta->plink_lock); + mpl_dbg("Mesh plink with %s ESTABLISHED\n", + print_mac(mac, sta->addr)); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + break; + + case CNF_RCVD: + switch (event) { + case OPN_RJCT: + case CNF_RJCT: + reason = cpu_to_le16(MESH_CAPABILITY_POLICY_VIOLATION); + case CLS_ACPT: + if (!reason) + reason = cpu_to_le16(MESH_CLOSE_RCVD); + sta->reason = reason; + sta->plink_state = HOLDING; + if (!mod_plink_timer(sta, + dot11MeshHoldingTimeout(sdata))) + sta->ignore_plink_timer = true; + + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, + plid, reason); + case OPN_ACPT: + if (del_timer(&sta->plink_timer)) + sta_info_put(sta); + sta->plink_state = ESTAB; + mesh_plink_inc_estab_count(sdata); + spin_unlock_bh(&sta->plink_lock); + mpl_dbg("Mesh plink with %s ESTABLISHED\n", + print_mac(mac, sta->addr)); + mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid, + plid, 0); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + break; + + case ESTAB: + switch (event) { + case CLS_ACPT: + reason = cpu_to_le16(MESH_CLOSE_RCVD); + sta->reason = reason; + mesh_plink_deactivate(sta); + sta->plink_state = HOLDING; + llid = sta->llid; + if (!mod_plink_timer(sta, + dot11MeshHoldingTimeout(sdata))) + __sta_info_get(sta); + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, + plid, reason); + break; + case OPN_ACPT: + llid = sta->llid; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CONFIRM, sta->addr, llid, + plid, 0); + break; + default: + spin_unlock_bh(&sta->plink_lock); + break; + } + break; + case HOLDING: + switch (event) { + case CLS_ACPT: + if (del_timer(&sta->plink_timer)) { + sta->ignore_plink_timer = 1; + sta_info_put(sta); + } + mesh_plink_fsm_restart(sta); + spin_unlock_bh(&sta->plink_lock); + break; + case OPN_ACPT: + case CNF_ACPT: + case OPN_RJCT: + case CNF_RJCT: + llid = sta->llid; + reason = sta->reason; + spin_unlock_bh(&sta->plink_lock); + mesh_plink_frame_tx(dev, PLINK_CLOSE, sta->addr, llid, + plid, reason); + break; + default: + spin_unlock_bh(&sta->plink_lock); + } + break; + default: + /* should not get here, BLOCKED is dealt with at the beggining + * of the function + */ + spin_unlock_bh(&sta->plink_lock); + break; + } + sta_info_put(sta); +} -- 2.41.1