From c1f99c215c58111629984a49ba87b2b145dd1f5b Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Mon, 8 Dec 2008 18:35:03 +0800 Subject: [PATCH] [ARM] pxafb: allow better platform configurable smart panel timing For smart panels (LCD panel with internal framebuffer), the following LCCR3 register bits have different meanings than the parallel one: LCCR3_PCP - controls the L_PCLK_WR polarity LCCR3_HSP - controls the L_LCLK_A0 polarity LCCR3_VSP - controls the L_FCLK_RD polarity To keep minimum change to the original parallel timing, the .lcd_conn flags and 'pxafb_mode_info.sync' are re-used to reflect this: LCD_PCLK_EDGE_{RISE,FALL} - configures LCCR3_PCP sync & FB_SYNC_{HOR,VERT}_HIGH_ACT - configures LCCR3_{HSP,VSP} Signed-off-by: Eric Miao --- arch/arm/mach-pxa/include/mach/pxafb.h | 4 ++++ drivers/video/pxafb.c | 4 +++- 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index cb44410cd45..4201a889ff4 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -95,6 +95,10 @@ struct pxafb_mode_info { * in pxa27x and pxa3xx, initialize them to the same value or * the larger one will be used * 3. same to {rd,wr}_pulse_width + * + * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity + * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0 + * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD */ unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 62d2dd0c1fa..d6de84b4203 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -760,7 +760,9 @@ static void setup_smart_timing(struct pxafb_info *fbi, LCCR1_HorSnchWdth(__smart_timing(t3, lclk)); fbi->reg_lccr2 = LCCR2_DisHght(var->yres); - fbi->reg_lccr3 = LCCR3_PixClkDiv(__smart_timing(t4, lclk)); + fbi->reg_lccr3 = fbi->lccr3 | LCCR3_PixClkDiv(__smart_timing(t4, lclk)); + fbi->reg_lccr3 |= (var->sync & FB_SYNC_HOR_HIGH_ACT) ? LCCR3_HSP : 0; + fbi->reg_lccr3 |= (var->sync & FB_SYNC_VERT_HIGH_ACT) ? LCCR3_VSP : 0; /* FIXME: make this configurable */ fbi->reg_cmdcr = 1; -- 2.41.1