From bccaea8fe287454d70f5b2546910561e9f884053 Mon Sep 17 00:00:00 2001 From: Jerone Young Date: Fri, 6 Jun 2008 14:09:05 -0500 Subject: [PATCH] powerpc/booke: Fix definitions for dbcr[1-2] and dbsr registers This takes values from the PowerPC ISA BookIII-E specifications that are for DBCR0. Many of these values are different from those currently specified, which are for the ppc405. Also added some bookE definitions for DBCR1 & DBCR2. [ galak@kernel.crashing.org: Added aliases to 40x DBCR0 to match Book-E, Added enhanced debug DBCR0/DBSR _CIRPT and _CRET defines and DBSR IRPT and RET. ] Signed-off-by: Jerone Young Acked-by: Josh Boyer Signed-off-by: Kumar Gala --- include/asm-powerpc/reg_booke.h | 55 +++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h index cf54a3f3175..a1ab2ba8f1b 100644 --- a/include/asm-powerpc/reg_booke.h +++ b/include/asm-powerpc/reg_booke.h @@ -210,6 +210,7 @@ #ifdef CONFIG_BOOKE #define DBSR_IC 0x08000000 /* Instruction Completion */ #define DBSR_BT 0x04000000 /* Branch Taken */ +#define DBSR_IRPT 0x02000000 /* Exception Debug Event */ #define DBSR_TIE 0x01000000 /* Trap Instruction Event */ #define DBSR_IAC1 0x00800000 /* Instr Address Compare 1 Event */ #define DBSR_IAC2 0x00400000 /* Instr Address Compare 2 Event */ @@ -219,10 +220,14 @@ #define DBSR_DAC1W 0x00040000 /* Data Addr Compare 1 Write Event */ #define DBSR_DAC2R 0x00020000 /* Data Addr Compare 2 Read Event */ #define DBSR_DAC2W 0x00010000 /* Data Addr Compare 2 Write Event */ +#define DBSR_RET 0x00008000 /* Return Debug Event */ +#define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ #endif #ifdef CONFIG_40x #define DBSR_IC 0x80000000 /* Instruction Completion */ #define DBSR_BT 0x40000000 /* Branch taken */ +#define DBSR_IRPT 0x20000000 /* Exception Debug Event */ #define DBSR_TIE 0x10000000 /* Trap Instruction debug Event */ #define DBSR_IAC1 0x04000000 /* Instruction Address Compare 1 Event */ #define DBSR_IAC2 0x02000000 /* Instruction Address Compare 2 Event */ @@ -253,6 +258,7 @@ #define ESR_BO 0x00020000 /* Byte Ordering */ /* Bit definitions related to the DBCR0. */ +#if defined(CONFIG_40x) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ #define DBCR0_RST 0x30000000 /* all the bits in the RST field */ @@ -261,20 +267,69 @@ #define DBCR0_RST_CORE 0x10000000 /* Core Reset */ #define DBCR0_RST_NONE 0x00000000 /* No Reset */ #define DBCR0_IC 0x08000000 /* Instruction Completion */ +#define DBCR0_ICMP DBCR0_IC #define DBCR0_BT 0x04000000 /* Branch Taken */ +#define DBCR0_BRT DBCR0_BT #define DBCR0_EDE 0x02000000 /* Exception Debug Event */ +#define DBCR0_IRPT DBCR0_EDE #define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ #define DBCR0_IA1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC1 DBCR0_IA1 #define DBCR0_IA2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC2 DBCR0_IA2 #define DBCR0_IA12 0x00200000 /* Instr Addr 1-2 range enable */ #define DBCR0_IA12X 0x00100000 /* Instr Addr 1-2 range eXclusive */ #define DBCR0_IA3 0x00080000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC3 DBCR0_IA3 #define DBCR0_IA4 0x00040000 /* Instr Addr compare 4 enable */ +#define DBCR0_IAC4 DBCR0_IA4 #define DBCR0_IA34 0x00020000 /* Instr Addr 3-4 range Enable */ #define DBCR0_IA34X 0x00010000 /* Instr Addr 3-4 range eXclusive */ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#elif defined(CONFIG_BOOKE) +#define DBCR0_EDM 0x80000000 /* External Debug Mode */ +#define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ +#define DBCR0_RST 0x30000000 /* all the bits in the RST field */ +/* DBCR0_RST_* is 44x specific and not followed in fsl booke */ +#define DBCR0_RST_SYSTEM 0x30000000 /* System Reset */ +#define DBCR0_RST_CHIP 0x20000000 /* Chip Reset */ +#define DBCR0_RST_CORE 0x10000000 /* Core Reset */ +#define DBCR0_RST_NONE 0x00000000 /* No Reset */ +#define DBCR0_ICMP 0x08000000 /* Instruction Completion */ +#define DBCR0_IC DBCR0_ICMP +#define DBCR0_BRT 0x04000000 /* Branch Taken */ +#define DBCR0_BT DBCR0_BRT +#define DBCR0_IRPT 0x02000000 /* Exception Debug Event */ +#define DBCR0_TDE 0x01000000 /* TRAP Debug Event */ +#define DBCR0_TIE DBCR0_TDE +#define DBCR0_IAC1 0x00800000 /* Instr Addr compare 1 enable */ +#define DBCR0_IAC2 0x00400000 /* Instr Addr compare 2 enable */ +#define DBCR0_IAC3 0x00200000 /* Instr Addr compare 3 enable */ +#define DBCR0_IAC4 0x00100000 /* Instr Addr compare 4 enable */ +#define DBCR0_DAC1R 0x00080000 /* DAC 1 Read enable */ +#define DBCR0_DAC1W 0x00040000 /* DAC 1 Write enable */ +#define DBCR0_DAC2R 0x00020000 /* DAC 2 Read enable */ +#define DBCR0_DAC2W 0x00010000 /* DAC 2 Write enable */ +#define DBCR0_RET 0x00008000 /* Return Debug Event */ +#define DBCR0_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ +#define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ +#define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ +#define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ +#define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ +#define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ + +/* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ +#endif /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ -- 2.41.1