From bc27490f9164281b9e1768a5df8e0951541f90a1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 7 Jan 2009 16:37:29 +0100 Subject: [PATCH] hwmon: (f71882fg) Cleanup fan and temp hyst functions Simplify fan and temp hyst. handling by treating the registers as an array of nibbles instead of using switch cases. Also unify the way hysts are handled between temp and fans, the temp code was storing the actual per temp hyst values in 4 u8's, where as the fan code was storing actual register values. Signed-off-by: Hans de Goede Signed-off-by: Jean Delvare --- drivers/hwmon/f71882fg.c | 121 ++++++++++++++------------------------- 1 file changed, 43 insertions(+), 78 deletions(-) diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 345f465aa28..de559923454 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -68,8 +68,7 @@ #define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr)) #define F71882FG_REG_TEMP_STATUS 0x62 #define F71882FG_REG_TEMP_BEEP 0x63 -#define F71882FG_REG_TEMP_HYST1 0x6C -#define F71882FG_REG_TEMP_HYST23 0x6D +#define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr)) #define F71882FG_REG_TEMP_TYPE 0x6B #define F71882FG_REG_TEMP_DIODE_OPEN 0x6F @@ -77,8 +76,7 @@ #define F71882FG_REG_PWM_TYPE 0x94 #define F71882FG_REG_PWM_ENABLE 0x96 -#define F71882FG_REG_FAN_HYST0 0x98 -#define F71882FG_REG_FAN_HYST1 0x99 +#define F71882FG_REG_FAN_HYST(nr) (0x98 + (nr)) #define F71882FG_REG_POINT_PWM(pwm, point) (0xAA + (point) + (16 * (pwm))) #define F71882FG_REG_POINT_TEMP(pwm, point) (0xA6 + (point) + (16 * (pwm))) @@ -144,7 +142,7 @@ struct f71882fg_data { u8 temp[4]; u8 temp_ovt[4]; u8 temp_high[4]; - u8 temp_hyst[4]; + u8 temp_hyst[2]; /* 2 hysts stored per reg */ u8 temp_type[4]; u8 temp_status; u8 temp_beep; @@ -688,13 +686,11 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) F71882FG_REG_TEMP_HIGH(nr)); } - /* Have to hardcode hyst*/ - data->temp_hyst[1] = f71882fg_read8(data, - F71882FG_REG_TEMP_HYST1) >> 4; - /* Hyst temps 2 & 3 stored in same register */ - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23); - data->temp_hyst[2] = reg & 0x0F; - data->temp_hyst[3] = reg >> 4; + /* hyst */ + data->temp_hyst[0] = + f71882fg_read8(data, F71882FG_REG_TEMP_HYST(0)); + data->temp_hyst[1] = + f71882fg_read8(data, F71882FG_REG_TEMP_HYST(1)); /* Have to hardcode type, because temp1 is special */ reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE); @@ -715,10 +711,11 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev) data->pwm_enable = f71882fg_read8(data, F71882FG_REG_PWM_ENABLE); - data->pwm_auto_point_hyst[0] = f71882fg_read8(data, - F71882FG_REG_FAN_HYST0); - data->pwm_auto_point_hyst[1] = f71882fg_read8(data, - F71882FG_REG_FAN_HYST1); + data->pwm_auto_point_hyst[0] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(0)); + data->pwm_auto_point_hyst[1] = + f71882fg_read8(data, F71882FG_REG_FAN_HYST(1)); + for (nr = 0; nr < nr_fans; nr++) { data->pwm_auto_point_mapping[nr] = f71882fg_read8(data, @@ -1011,7 +1008,11 @@ static ssize_t show_temp_max_hyst(struct device *dev, struct device_attribute int temp_max_hyst; mutex_lock(&data->update_lock); - temp_max_hyst = (data->temp_high[nr] - data->temp_hyst[nr]) * 1000; + if (nr & 1) + temp_max_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_max_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_max_hyst = (data->temp_high[nr] - temp_max_hyst) * 1000; mutex_unlock(&data->update_lock); return sprintf(buf, "%d\n", temp_max_hyst); @@ -1033,26 +1034,15 @@ static ssize_t store_temp_max_hyst(struct device *dev, struct device_attribute val = SENSORS_LIMIT(val, data->temp_high[nr] - 15, data->temp_high[nr]); val = data->temp_high[nr] - val; - data->temp_hyst[nr] = val; /* convert value to register contents */ - switch (nr) { - case 1: - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST1); - reg = (reg & 0x0f) | (val << 4); - break; - case 2: - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23); - reg = (reg & 0xf0) | val; - break; - case 3: - reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST23); - reg = (reg & 0x0f) | (val << 4); - break; - } - - f71882fg_write8(data, (nr <= 1) ? F71882FG_REG_TEMP_HYST1 : - F71882FG_REG_TEMP_HYST23, reg); + reg = f71882fg_read8(data, F71882FG_REG_TEMP_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + f71882fg_write8(data, F71882FG_REG_TEMP_HYST(nr / 2), reg); + data->temp_hyst[nr / 2] = reg; mutex_unlock(&data->update_lock); return ret; @@ -1091,7 +1081,11 @@ static ssize_t show_temp_crit_hyst(struct device *dev, struct device_attribute int temp_crit_hyst; mutex_lock(&data->update_lock); - temp_crit_hyst = (data->temp_ovt[nr] - data->temp_hyst[nr]) * 1000; + if (nr & 1) + temp_crit_hyst = data->temp_hyst[nr / 2] >> 4; + else + temp_crit_hyst = data->temp_hyst[nr / 2] & 0x0f; + temp_crit_hyst = (data->temp_ovt[nr] - temp_crit_hyst) * 1000; mutex_unlock(&data->update_lock); return sprintf(buf, "%d\n", temp_crit_hyst); @@ -1320,20 +1314,10 @@ static ssize_t show_pwm_auto_point_temp_hyst(struct device *dev, int point = to_sensor_dev_attr_2(devattr)->nr; mutex_lock(&data->update_lock); - switch (nr) { - case 0: - result = data->pwm_auto_point_hyst[0] & 0x0f; - break; - case 1: - result = data->pwm_auto_point_hyst[0] >> 4; - break; - case 2: - result = data->pwm_auto_point_hyst[1] & 0x0f; - break; - case 3: - result = data->pwm_auto_point_hyst[1] >> 4; - break; - } + if (nr & 1) + result = data->pwm_auto_point_hyst[nr / 2] >> 4; + else + result = data->pwm_auto_point_hyst[nr / 2] & 0x0f; result = 1000 * (data->pwm_auto_point_temp[nr][point] - result); mutex_unlock(&data->update_lock); @@ -1348,6 +1332,7 @@ static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, int nr = to_sensor_dev_attr_2(devattr)->index; int point = to_sensor_dev_attr_2(devattr)->nr; long val = simple_strtol(buf, NULL, 10) / 1000; + u8 reg; mutex_lock(&data->update_lock); data->pwm_auto_point_temp[nr][point] = @@ -1356,34 +1341,14 @@ static ssize_t store_pwm_auto_point_temp_hyst(struct device *dev, data->pwm_auto_point_temp[nr][point]); val = data->pwm_auto_point_temp[nr][point] - val; - if (nr == 0 || nr == 1) { - data->pwm_auto_point_hyst[0] = - f71882fg_read8(data, F71882FG_REG_FAN_HYST0); - } else { - data->pwm_auto_point_hyst[1] = - f71882fg_read8(data, F71882FG_REG_FAN_HYST1); - } - switch (nr) { - case 0: - val = (data->pwm_auto_point_hyst[0] & 0xf0) | val; - break; - case 1: - val = (data->pwm_auto_point_hyst[0] & 0x0f) | (val << 4); - break; - case 2: - val = (data->pwm_auto_point_hyst[1] & 0xf0) | val; - break; - case 3: - val = (data->pwm_auto_point_hyst[1] & 0x0f) | (val << 4); - break; - } - if (nr == 0 || nr == 1) { - f71882fg_write8(data, F71882FG_REG_FAN_HYST0, val); - data->pwm_auto_point_hyst[0] = val; - } else { - f71882fg_write8(data, F71882FG_REG_FAN_HYST1, val); - data->pwm_auto_point_hyst[1] = val; - } + reg = f71882fg_read8(data, F71882FG_REG_FAN_HYST(nr / 2)); + if (nr & 1) + reg = (reg & 0x0f) | (val << 4); + else + reg = (reg & 0xf0) | val; + + f71882fg_write8(data, F71882FG_REG_FAN_HYST(nr / 2), reg); + data->pwm_auto_point_hyst[nr / 2] = reg; mutex_unlock(&data->update_lock); return count; -- 2.41.1