From b406c7a6655da7a2fcd9f72e41262f93ff707748 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 12:01:12 -0400 Subject: [PATCH] sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 969a7698778..17093e600d8 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2557,7 +2557,6 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, */ m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); - writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; @@ -2573,6 +2572,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, writel(m4, port_mmio + PHY_MODE4); } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ m2 = readl(port_mmio + PHY_MODE2); -- 2.41.1