From ab2375f2fe256358a982e357d298801cf1adbd00 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Mon, 13 Oct 2008 10:33:51 +0100 Subject: [PATCH] Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in PIO mode Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- arch/blackfin/kernel/bfin_dma_5xx.c | 13 ++++---- drivers/serial/bfin_5xx.c | 50 +++++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 7 deletions(-) diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index 93229b3d6e3..339293d677c 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -117,15 +117,14 @@ int request_dma(unsigned int channel, char *device_id) #ifdef CONFIG_BF54x if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) { - if (strncmp(device_id, "BFIN_UART", 9) == 0) { - dma_ch[channel].regs->peripheral_map &= 0x0FFF; - dma_ch[channel].regs->peripheral_map |= + unsigned int per_map; + per_map = dma_ch[channel].regs->peripheral_map & 0xFFF; + if (strncmp(device_id, "BFIN_UART", 9) == 0) + dma_ch[channel].regs->peripheral_map = per_map | ((channel - CH_UART2_RX + 0xC)<<12); - } else { - dma_ch[channel].regs->peripheral_map &= 0x0FFF; - dma_ch[channel].regs->peripheral_map |= + else + dma_ch[channel].regs->peripheral_map = per_map | ((channel - CH_UART2_RX + 0x6)<<12); - } } #endif diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index a5cf0e70b3f..569f0e2476c 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -649,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port) free_irq(uart->port.irq, uart); return -EBUSY; } + +# ifdef CONFIG_BF54x + { + unsigned uart_dma_ch_rx, uart_dma_ch_tx; + + switch (uart->port.irq) { + case IRQ_UART3_RX: + uart_dma_ch_rx = CH_UART3_RX; + uart_dma_ch_tx = CH_UART3_TX; + break; + case IRQ_UART2_RX: + uart_dma_ch_rx = CH_UART2_RX; + uart_dma_ch_tx = CH_UART2_TX; + break; + default: + uart_dma_ch_rx = uart_dma_ch_tx = 0; + break; + }; + + if (uart_dma_ch_rx && + request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE"Fail to attach UART interrupt\n"); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + if (uart_dma_ch_tx && + request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Fail to attach UART interrupt\n"); + free_dma(uart_dma_ch_rx); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + } +# endif #endif UART_SET_IER(uart, ERBFI); return 0; @@ -666,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port) del_timer(&(uart->rx_dma_timer)); dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); #else +#ifdef CONFIG_BF54x + switch (uart->port.irq) { + case IRQ_UART3_RX: + free_dma(CH_UART3_RX); + free_dma(CH_UART3_TX); + break; + case IRQ_UART2_RX: + free_dma(CH_UART2_RX); + free_dma(CH_UART2_TX); + break; + default: + break; + }; +#endif #ifdef CONFIG_KGDB_UART if (uart->port.line != CONFIG_KGDB_UART_PORT) #endif -- 2.41.1