From 993958fecab6eabc6ee5b7ed65c56d716fd5cfe3 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 3 Feb 2009 15:14:33 +0800 Subject: [PATCH] ACPICA: Update FADT flag definitions Add new flags in the Boot Architecture flags field. Update comments for all FADT flags. Add FADT version when each flag was defined. Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown --- drivers/pci/pci-acpi.c | 4 +-- include/acpi/actbl.h | 69 +++++++++++++++++++++--------------------- 2 files changed, 36 insertions(+), 37 deletions(-) diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index deea8a187eb..368ca72dffb 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -386,12 +386,12 @@ static int __init acpi_pci_init(void) { int ret; - if (acpi_gbl_FADT.boot_flags & BAF_MSI_NOT_SUPPORTED) { + if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_MSI) { printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n"); pci_no_msi(); } - if (acpi_gbl_FADT.boot_flags & BAF_PCIE_ASPM_CONTROL) { + if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM) { printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n"); pcie_no_aspm(); } diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h index 1f3dfdb1b37..222733d01f3 100644 --- a/include/acpi/actbl.h +++ b/include/acpi/actbl.h @@ -214,11 +214,11 @@ struct acpi_table_fadt { u16 flush_size; /* Processor's memory cache line width, in bytes */ u16 flush_stride; /* Number of flush strides that need to be read */ u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */ - u8 duty_width; /* Processor duty cycle value bit width in P_CNT register. */ + u8 duty_width; /* Processor duty cycle value bit width in P_CNT register */ u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */ u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */ u8 century; /* Index to century in RTC CMOS RAM */ - u16 boot_flags; /* IA-PC Boot Architecture Flags. See Table 5-10 for description */ + u16 boot_flags; /* IA-PC Boot Architecture Flags (see below for individual flags) */ u8 reserved; /* Reserved, must be zero */ u32 flags; /* Miscellaneous flag bits (see below for individual flags) */ struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */ @@ -236,32 +236,41 @@ struct acpi_table_fadt { struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */ }; +/* FADT Boot Architecture Flags (boot_flags) */ + +#define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */ +#define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */ +#define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */ +#define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */ +#define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */ + +#define FADT2_REVISION_ID 3 + /* FADT flags */ -#define ACPI_FADT_WBINVD (1) /* 00: The wbinvd instruction works properly */ -#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: The wbinvd flushes but does not invalidate */ -#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: All processors support C1 state */ -#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: C2 state works on MP system */ -#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */ -#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */ -#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */ -#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup possible from S4 */ -#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */ -#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */ -#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */ -#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: No internal expansion capabilities and case is sealed */ -#define ACPI_FADT_HEADLESS (1<<12) /* 12: No local video capabilities or local input devices */ -#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: Must execute native instruction after writing SLP_TYPx register */ -#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ -#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: OSPM should use platform-provided timer (ACPI 3.0) */ -#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ -#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: System is compatible with remote power on (ACPI 3.0) */ -#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: All local APICs must use cluster model (ACPI 3.0) */ -#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */ +#define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */ +#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */ +#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */ +#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */ +#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */ +#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */ +#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status not in fixed register space */ +#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */ +#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */ +#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */ +#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */ +#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */ +#define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */ +#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */ +#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */ +#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */ +#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */ +#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */ +#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */ +#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */ + +/* FADT Prefered Power Management Profiles */ -/* - * FADT Prefered Power Management Profiles - */ enum acpi_prefered_pm_profiles { PM_UNSPECIFIED = 0, PM_DESKTOP = 1, @@ -272,16 +281,6 @@ enum acpi_prefered_pm_profiles { PM_APPLIANCE_PC = 6 }; -/* FADT Boot Arch Flags */ - -#define BAF_LEGACY_DEVICES 0x0001 -#define BAF_8042_KEYBOARD_CONTROLLER 0x0002 -#define BAF_MSI_NOT_SUPPORTED 0x0008 -#define BAF_PCIE_ASPM_CONTROL 0x0010 - -#define FADT2_REVISION_ID 3 -#define FADT2_MINUS_REVISION_ID 2 - /* Reset to default packing */ #pragma pack() -- 2.41.1