From 945c10b87c4d72ac9ad392132d19d17f3ebdb310 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Wed, 28 Jan 2009 15:13:52 +0100 Subject: [PATCH] mx31ads: use of new iomux implementation This was only compilation tested. Signed-off-by: Valentin Longchamp Signed-off-by: Sascha Hauer --- arch/arm/mach-mx3/mx31ads.c | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c index 6804fbe266e..7941db3caf6 100644 --- a/arch/arm/mach-mx3/mx31ads.c +++ b/arch/arm/mach-mx3/mx31ads.c @@ -94,13 +94,16 @@ static struct imxuart_platform_data uart_pdata = { .flags = IMXUART_HAVE_RTSCTS, }; +static int uart_pins[] = { + MX31_PIN_CTS1__CTS1, + MX31_PIN_RTS1__RTS1, + MX31_PIN_TXD1__TXD1, + MX31_PIN_RXD1__RXD1 +}; + static inline void mxc_init_imx_uart(void) { - mxc_iomux_mode(MX31_PIN_CTS1__CTS1); - mxc_iomux_mode(MX31_PIN_RTS1__RTS1); - mxc_iomux_mode(MX31_PIN_TXD1__TXD1); - mxc_iomux_mode(MX31_PIN_RXD1__RXD1); - + mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0"); mxc_register_device(&mxc_uart_device0, &uart_pdata); } #else /* !SERIAL_IMX */ @@ -176,7 +179,7 @@ static void __init mx31ads_init_expio(void) /* * Configure INT line as GPIO input */ - mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO)); + mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio"); /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); -- 2.41.1