From 93a22f8b95756c53e80308820892119c910d2739 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 15 Oct 2008 22:03:15 -0700 Subject: [PATCH] omap drivers: switch to standard GPIO calls This updates most of the OMAP drivers which are in mainline to switch to using the cross-platform GPIO calls instead of the older OMAP-specific ones. This is all fairly brainless/obvious stuff. Probably the most interesting bit is to observe that the omap-keypad code seems to now have a portable core that could work with non-OMAP matrix keypads. (That would improve with hardware IRQ debouncing enabled, of course...) Signed-off-by: David Brownell Signed-off-by: Tony Lindgren Cc: Dmitry Torokhov Cc: Antonino Daplas Cc: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/input/keyboard/omap-keypad.c | 27 ++++---- drivers/mtd/nand/ams-delta.c | 4 +- drivers/video/omap/lcd_inn1610.c | 22 +++---- drivers/video/omap/lcd_osk.c | 10 ++- drivers/video/omap/lcd_sx1.c | 99 +++++++++++++--------------- 5 files changed, 75 insertions(+), 87 deletions(-) diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c index dcea87a0bc5..9a816db7cc2 100644 --- a/drivers/input/keyboard/omap-keypad.c +++ b/drivers/input/keyboard/omap-keypad.c @@ -72,12 +72,9 @@ static unsigned int *col_gpios; static void set_col_gpio_val(struct omap_kp *omap_kp, u8 value) { int col; - for (col = 0; col < omap_kp->cols; col++) { - if (value & (1 << col)) - omap_set_gpio_dataout(col_gpios[col], 1); - else - omap_set_gpio_dataout(col_gpios[col], 0); - } + + for (col = 0; col < omap_kp->cols; col++) + gpio_set_value(col_gpios[col], value & (1 << col)); } static u8 get_row_gpio_val(struct omap_kp *omap_kp) @@ -86,7 +83,7 @@ static u8 get_row_gpio_val(struct omap_kp *omap_kp) u8 value = 0; for (row = 0; row < omap_kp->rows; row++) { - if (omap_get_gpio_datain(row_gpios[row])) + if (gpio_get_value(row_gpios[row])) value |= (1 << row); } return value; @@ -333,23 +330,23 @@ static int __init omap_kp_probe(struct platform_device *pdev) if (cpu_is_omap24xx()) { /* Cols: outputs */ for (col_idx = 0; col_idx < omap_kp->cols; col_idx++) { - if (omap_request_gpio(col_gpios[col_idx]) < 0) { + if (gpio_request(col_gpios[col_idx], "omap_kp_col") < 0) { printk(KERN_ERR "Failed to request" "GPIO%d for keypad\n", col_gpios[col_idx]); goto err1; } - omap_set_gpio_direction(col_gpios[col_idx], 0); + gpio_direction_output(col_gpios[col_idx], 0); } /* Rows: inputs */ for (row_idx = 0; row_idx < omap_kp->rows; row_idx++) { - if (omap_request_gpio(row_gpios[row_idx]) < 0) { + if (gpio_request(row_gpios[row_idx], "omap_kp_row") < 0) { printk(KERN_ERR "Failed to request" "GPIO%d for keypad\n", row_gpios[row_idx]); goto err2; } - omap_set_gpio_direction(row_gpios[row_idx], 1); + gpio_direction_input(row_gpios[row_idx]); } } else { col_idx = 0; @@ -418,10 +415,10 @@ err3: device_remove_file(&pdev->dev, &dev_attr_enable); err2: for (i = row_idx - 1; i >=0; i--) - omap_free_gpio(row_gpios[i]); + gpio_free(row_gpios[i]); err1: for (i = col_idx - 1; i >=0; i--) - omap_free_gpio(col_gpios[i]); + gpio_free(col_gpios[i]); kfree(omap_kp); input_free_device(input_dev); @@ -438,9 +435,9 @@ static int omap_kp_remove(struct platform_device *pdev) if (cpu_is_omap24xx()) { int i; for (i = 0; i < omap_kp->cols; i++) - omap_free_gpio(col_gpios[i]); + gpio_free(col_gpios[i]); for (i = 0; i < omap_kp->rows; i++) { - omap_free_gpio(row_gpios[i]); + gpio_free(row_gpios[i]); free_irq(OMAP_GPIO_IRQ(row_gpios[i]), 0); } } else { diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index 26d42987971..782994ead0e 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -145,7 +145,7 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd, static int ams_delta_nand_ready(struct mtd_info *mtd) { - return omap_get_gpio_datain(AMS_DELTA_GPIO_PIN_NAND_RB); + return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB); } /* @@ -185,7 +185,7 @@ static int __init ams_delta_init(void) this->read_buf = ams_delta_read_buf; this->verify_buf = ams_delta_verify_buf; this->cmd_ctrl = ams_delta_hwcontrol; - if (!omap_request_gpio(AMS_DELTA_GPIO_PIN_NAND_RB)) { + if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) { this->dev_ready = ams_delta_nand_ready; } else { this->dev_ready = NULL; diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c index 6a42c6a0cd9..4c4f7ee6d73 100644 --- a/drivers/video/omap/lcd_inn1610.c +++ b/drivers/video/omap/lcd_inn1610.c @@ -32,43 +32,43 @@ static int innovator1610_panel_init(struct lcd_panel *panel, { int r = 0; - if (omap_request_gpio(14)) { + if (gpio_request(14, "lcd_en0")) { pr_err(MODULE_NAME ": can't request GPIO 14\n"); r = -1; goto exit; } - if (omap_request_gpio(15)) { + if (gpio_request(15, "lcd_en1")) { pr_err(MODULE_NAME ": can't request GPIO 15\n"); - omap_free_gpio(14); + gpio_free(14); r = -1; goto exit; } /* configure GPIO(14, 15) as outputs */ - omap_set_gpio_direction(14, 0); - omap_set_gpio_direction(15, 0); + gpio_direction_output(14, 0); + gpio_direction_output(15, 0); exit: return r; } static void innovator1610_panel_cleanup(struct lcd_panel *panel) { - omap_free_gpio(15); - omap_free_gpio(14); + gpio_free(15); + gpio_free(14); } static int innovator1610_panel_enable(struct lcd_panel *panel) { /* set GPIO14 and GPIO15 high */ - omap_set_gpio_dataout(14, 1); - omap_set_gpio_dataout(15, 1); + gpio_set_value(14, 1); + gpio_set_value(15, 1); return 0; } static void innovator1610_panel_disable(struct lcd_panel *panel) { /* set GPIO13, GPIO14 and GPIO15 low */ - omap_set_gpio_dataout(14, 0); - omap_set_gpio_dataout(15, 0); + gpio_set_value(14, 0); + gpio_set_value(15, 0); } static unsigned long innovator1610_panel_get_caps(struct lcd_panel *panel) diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c index a4a725f427a..379c96d36da 100644 --- a/drivers/video/omap/lcd_osk.c +++ b/drivers/video/omap/lcd_osk.c @@ -29,6 +29,7 @@ static int osk_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) { + /* gpio2 was allocated in board init */ return 0; } @@ -47,11 +48,8 @@ static int osk_panel_enable(struct lcd_panel *panel) /* Set PWL level */ omap_writeb(0xFF, OMAP_PWL_ENABLE); - /* configure GPIO2 as output */ - omap_set_gpio_direction(2, 0); - - /* set GPIO2 high */ - omap_set_gpio_dataout(2, 1); + /* set GPIO2 high (lcd power enabled) */ + gpio_set_value(2, 1); return 0; } @@ -65,7 +63,7 @@ static void osk_panel_disable(struct lcd_panel *panel) omap_writeb(0x00, OMAP_PWL_CLK_ENABLE); /* set GPIO2 low */ - omap_set_gpio_dataout(2, 0); + gpio_set_value(2, 0); } static unsigned long osk_panel_get_caps(struct lcd_panel *panel) diff --git a/drivers/video/omap/lcd_sx1.c b/drivers/video/omap/lcd_sx1.c index caa6a896cb8..e55de201b8f 100644 --- a/drivers/video/omap/lcd_sx1.c +++ b/drivers/video/omap/lcd_sx1.c @@ -81,21 +81,21 @@ static void epson_sendbyte(int flag, unsigned char byte) int i, shifter = 0x80; if (!flag) - omap_set_gpio_dataout(_A_LCD_SSC_A0, 0); + gpio_set_value(_A_LCD_SSC_A0, 0); mdelay(2); - omap_set_gpio_dataout(A_LCD_SSC_RD, 1); + gpio_set_value(A_LCD_SSC_RD, 1); - omap_set_gpio_dataout(A_LCD_SSC_SD, flag); + gpio_set_value(A_LCD_SSC_SD, flag); OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); for (i = 0; i < 8; i++) { OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2200); - omap_set_gpio_dataout(A_LCD_SSC_SD, shifter & byte); + gpio_set_value(A_LCD_SSC_SD, shifter & byte); OMAP_MCBSP_WRITE(OMAP1510_MCBSP3_BASE, PCR0, 0x2202); shifter >>= 1; } - omap_set_gpio_dataout(_A_LCD_SSC_A0, 1); + gpio_set_value(_A_LCD_SSC_A0, 1); } static void init_system(void) @@ -107,25 +107,18 @@ static void init_system(void) static void setup_GPIO(void) { /* new wave */ - omap_request_gpio(A_LCD_SSC_RD); - omap_request_gpio(A_LCD_SSC_SD); - omap_request_gpio(_A_LCD_RESET); - omap_request_gpio(_A_LCD_SSC_CS); - omap_request_gpio(_A_LCD_SSC_A0); - - /* set all GPIOs to output */ - omap_set_gpio_direction(A_LCD_SSC_RD, 0); - omap_set_gpio_direction(A_LCD_SSC_SD, 0); - omap_set_gpio_direction(_A_LCD_RESET, 0); - omap_set_gpio_direction(_A_LCD_SSC_CS, 0); - omap_set_gpio_direction(_A_LCD_SSC_A0, 0); - - /* set GPIO data */ - omap_set_gpio_dataout(A_LCD_SSC_RD, 1); - omap_set_gpio_dataout(A_LCD_SSC_SD, 0); - omap_set_gpio_dataout(_A_LCD_RESET, 0); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_A0, 1); + gpio_request(A_LCD_SSC_RD, "lcd_ssc_rd"); + gpio_request(A_LCD_SSC_SD, "lcd_ssc_sd"); + gpio_request(_A_LCD_RESET, "lcd_reset"); + gpio_request(_A_LCD_SSC_CS, "lcd_ssc_cs"); + gpio_request(_A_LCD_SSC_A0, "lcd_ssc_a0"); + + /* set GPIOs to output, with initial data */ + gpio_direction_output(A_LCD_SSC_RD, 1); + gpio_direction_output(A_LCD_SSC_SD, 0); + gpio_direction_output(_A_LCD_RESET, 0); + gpio_direction_output(_A_LCD_SSC_CS, 1); + gpio_direction_output(_A_LCD_SSC_A0, 1); } static void display_init(void) @@ -139,61 +132,61 @@ static void display_init(void) mdelay(2); /* reset LCD */ - omap_set_gpio_dataout(A_LCD_SSC_SD, 1); + gpio_set_value(A_LCD_SSC_SD, 1); epson_sendbyte(0, 0x25); - omap_set_gpio_dataout(_A_LCD_RESET, 0); + gpio_set_value(_A_LCD_RESET, 0); mdelay(10); - omap_set_gpio_dataout(_A_LCD_RESET, 1); + gpio_set_value(_A_LCD_RESET, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); mdelay(2); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD, phase 1 */ epson_sendbyte(0, 0xCA); for (i = 0; i < 10; i++) epson_sendbyte(1, INIT_1[i]); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 2 */ epson_sendbyte(0, 0xCB); for (i = 0; i < 125; i++) epson_sendbyte(1, INIT_2[i]); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 2a */ epson_sendbyte(0, 0xCC); for (i = 0; i < 14; i++) epson_sendbyte(1, INIT_3[i]); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 3 */ epson_sendbyte(0, 0xBC); epson_sendbyte(1, 0x08); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 4 */ epson_sendbyte(0, 0x07); epson_sendbyte(1, 0x05); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 5 */ epson_sendbyte(0, 0x94); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 6 */ epson_sendbyte(0, 0xC6); epson_sendbyte(1, 0x80); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); mdelay(100); /* used to be 1000 */ - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 7 */ epson_sendbyte(0, 0x16); @@ -201,8 +194,8 @@ static void display_init(void) epson_sendbyte(1, 0x00); epson_sendbyte(1, 0xB1); epson_sendbyte(1, 0x00); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 8 */ epson_sendbyte(0, 0x76); @@ -210,12 +203,12 @@ static void display_init(void) epson_sendbyte(1, 0x00); epson_sendbyte(1, 0xDB); epson_sendbyte(1, 0x00); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 0); /* init LCD phase 9 */ epson_sendbyte(0, 0xAF); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); } static int sx1_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev) @@ -231,18 +224,18 @@ static void sx1_panel_disable(struct lcd_panel *panel) { printk(KERN_INFO "SX1: LCD panel disable\n"); sx1_setmmipower(0); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); epson_sendbyte(0, 0x25); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 0); epson_sendbyte(0, 0xAE); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); mdelay(100); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 0); + gpio_set_value(_A_LCD_SSC_CS, 0); epson_sendbyte(0, 0x95); - omap_set_gpio_dataout(_A_LCD_SSC_CS, 1); + gpio_set_value(_A_LCD_SSC_CS, 1); } static int sx1_panel_enable(struct lcd_panel *panel) -- 2.41.1