From 89bf6dc51ac7adb5a7d443648d9eb76909a1df8e Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Wed, 7 May 2008 11:41:26 +0800 Subject: [PATCH] Blackfin Serial Driver: macro away the IER differences between processors Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- drivers/serial/bfin_5xx.c | 58 ++----------------- .../asm-blackfin/mach-bf527/bfin_serial_5xx.h | 2 + .../asm-blackfin/mach-bf533/bfin_serial_5xx.h | 2 + .../asm-blackfin/mach-bf537/bfin_serial_5xx.h | 2 + .../asm-blackfin/mach-bf561/bfin_serial_5xx.h | 2 + 5 files changed, 12 insertions(+), 54 deletions(-) diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 8a2f6a1baa7..869c99aa77a 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -65,9 +65,6 @@ static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; struct circ_buf *xmit = &uart->port.info->xmit; -#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) - unsigned short ier; -#endif while (!(UART_GET_LSR(uart) & TEMT)) cpu_relax(); @@ -82,12 +79,8 @@ static void bfin_serial_stop_tx(struct uart_port *port) #ifdef CONFIG_BF54x /* Clear TFI bit */ UART_PUT_LSR(uart, TFI); - UART_CLEAR_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier &= ~ETBEI; - UART_PUT_IER(uart, ier); #endif + UART_CLEAR_IER(uart, ETBEI); #endif } @@ -102,14 +95,7 @@ static void bfin_serial_start_tx(struct uart_port *port) if (uart->tx_done) bfin_serial_dma_tx_chars(uart); #else -#ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); -#else - unsigned short ier; - ier = UART_GET_IER(uart); - ier |= ETBEI; - UART_PUT_IER(uart, ier); -#endif bfin_serial_tx_chars(uart); #endif } @@ -120,21 +106,10 @@ static void bfin_serial_start_tx(struct uart_port *port) static void bfin_serial_stop_rx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_KGDB_UART - if (uart->port.line != CONFIG_KGDB_UART_PORT) { +#ifdef CONFIG_KGDB_UART + if (uart->port.line != CONFIG_KGDB_UART_PORT) #endif -#ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ERBFI); -#else - unsigned short ier; - - ier = UART_GET_IER(uart); - ier &= ~ERBFI; - UART_PUT_IER(uart, ier); -#endif -#ifdef CONFIG_KGDB_UART - } -#endif } /* @@ -208,9 +183,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) struct tty_struct *tty = uart->port.info->tty; unsigned int status, ch, flg; static struct timeval anomaly_start = { .tv_sec = 0 }; -#ifdef CONFIG_KGDB_UART - struct pt_regs *regs = get_irq_regs(); -#endif status = UART_GET_LSR(uart); UART_CLEAR_LSR(uart); @@ -220,6 +192,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart) #ifdef CONFIG_KGDB_UART if (uart->port.line == CONFIG_KGDB_UART_PORT) { + struct pt_regs *regs = get_irq_regs(); if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */ kgdb_breakkey_pressed(regs); return; @@ -391,7 +364,6 @@ static void bfin_serial_do_work(struct work_struct *work) static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - unsigned short ier; uart->tx_done = 0; @@ -429,13 +401,7 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) set_dma_x_modify(uart->tx_dma_channel, 1); enable_dma(uart->tx_dma_channel); -#ifdef CONFIG_BF54x UART_SET_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier |= ETBEI; - UART_PUT_IER(uart, ier); -#endif } static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) @@ -513,19 +479,12 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; struct circ_buf *xmit = &uart->port.info->xmit; - unsigned short ier; spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { disable_dma(uart->tx_dma_channel); clear_dma_irqstat(uart->tx_dma_channel); -#ifdef CONFIG_BF54x UART_CLEAR_IER(uart, ETBEI); -#else - ier = UART_GET_IER(uart); - ier &= ~ETBEI; - UART_PUT_IER(uart, ier); -#endif xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); uart->port.icount.tx += uart->tx_count; @@ -701,7 +660,6 @@ static int bfin_serial_startup(struct uart_port *port) # endif } - if (request_irq (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, "BFIN_UART_TX", uart)) { @@ -710,11 +668,7 @@ static int bfin_serial_startup(struct uart_port *port) return -EBUSY; } #endif -#ifdef CONFIG_BF54x UART_SET_IER(uart, ERBFI); -#else - UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); -#endif return 0; } @@ -1290,11 +1244,7 @@ static int __init bfin_serial_init(void) request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, "BFIN_UART_RX", uart); pr_info("Request irq for kgdb uart port\n"); -#ifdef CONFIG_BF54x UART_SET_IER(uart, ERBFI); -#else - UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI); -#endif SSYNC(); t.c_cflag = CS8|B57600; t.c_iflag = 0; diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index f0ab2736a68..1bbfc2d75bd 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -44,6 +44,8 @@ #define UART_PUT_CHAR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_THR), v) #define UART_PUT_DLL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLL), v) #define UART_PUT_IER(uart, v) bfin_write16(((uart)->port.membase + OFFSET_IER), v) +#define UART_SET_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart, v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart, v) bfin_write16(((uart)->port.membase + OFFSET_DLH), v) #define UART_PUT_LCR(uart, v) bfin_write16(((uart)->port.membase + OFFSET_LCR), v) #define UART_PUT_GCTL(uart, v) bfin_write16(((uart)->port.membase + OFFSET_GCTL), v) diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index fbe88dee3e2..d22f052d6c8 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -44,6 +44,8 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index fd100a415b9..ae2362c0bf9 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -44,6 +44,8 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 8a4e66d1db3..c209f0df47f 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -44,6 +44,8 @@ #define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v) #define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v) #define UART_PUT_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER),v) +#define UART_SET_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) | (v)) +#define UART_CLEAR_IER(uart,v) UART_PUT_IER(uart, UART_GET_IER(uart) & ~(v)) #define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v) #define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v) #define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v) -- 2.41.1