From 83a6d4ab3b09c0c1921b657bbaac5ada3c9c3623 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 9 Jul 2007 23:17:55 +0200 Subject: [PATCH] cmd64x: init. code cleanup Fix two minor issues with PCI0646 chip reporting in the init_chipset() method: "IRQ workaround enabled" message printed out not only for revision 0x01 and "CMD646: chipset revision" printed twice (by IDE core and the driver itself). Also, remove empty/pointless switch cases for the chips other than PCI0646, duplicate write to the MRDMODE register when enabling interrupts and MEMORY READ LINE cycles, and needless/misplaced initialization of the timing registers in this method. Switch to reading only the PCI revision ID register itself, not the whole 32 bits at its address in init_chipset() and init_hwif() methods; in addition, get rid of the useless clearing of hwif->autodma and perform some cosmetic style changes in the latter method. Refactor ata66_cmd64x() by moving all the code into the 'switch' statement, renaming/adding variables, and fixing the coding style. While at it, finally get rid of the meaningless aliasing register #define's... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/cmd64x.c | 126 ++++++++++++++------------------------- 1 file changed, 45 insertions(+), 81 deletions(-) diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c index 7c57dc696f5..b0aa7d03b8a 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/pci/cmd64x.c @@ -1,5 +1,5 @@ /* - * linux/drivers/ide/pci/cmd64x.c Version 1.47 Mar 19, 2007 + * linux/drivers/ide/pci/cmd64x.c Version 1.50 May 10, 2007 * * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines. * Due to massive hardware bugs, UltraDMA is only supported @@ -52,9 +52,6 @@ #define ARTTIM23_DIS_RA2 0x04 #define ARTTIM23_DIS_RA3 0x08 #define ARTTIM23_INTR_CH1 0x10 -#define ARTTIM2 0x57 -#define ARTTIM3 0x57 -#define DRWTIM23 0x58 #define DRWTIM2 0x58 #define BRST 0x59 #define DRWTIM3 0x5b @@ -469,71 +466,43 @@ static int cmd646_1_ide_dma_end (ide_drive_t *drive) static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name) { - u32 class_rev = 0; u8 mrdmode = 0; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + if (dev->device == PCI_DEVICE_ID_CMD_646) { + u8 rev = 0; - switch(dev->device) { - case PCI_DEVICE_ID_CMD_643: - break; - case PCI_DEVICE_ID_CMD_646: - printk(KERN_INFO "%s: chipset revision 0x%02X, ", name, class_rev); - switch(class_rev) { - case 0x07: - case 0x05: - printk("UltraDMA Capable"); - break; - case 0x03: - printk("MultiWord DMA Force Limited"); - break; - case 0x01: - default: - printk("MultiWord DMA Limited, IRQ workaround enabled"); - break; - } - printk("\n"); - break; - case PCI_DEVICE_ID_CMD_648: - case PCI_DEVICE_ID_CMD_649: + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); + + switch (rev) { + case 0x07: + case 0x05: + printk("%s: UltraDMA capable", name); break; + case 0x03: default: + printk("%s: MultiWord DMA force limited", name); + break; + case 0x01: + printk("%s: MultiWord DMA limited, " + "IRQ workaround enabled\n", name); break; + } } /* Set a good latency timer and cache line size value. */ (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); /* FIXME: pci_set_master() to ensure a good latency timer value */ - /* Setup interrupts. */ - (void) pci_read_config_byte(dev, MRDMODE, &mrdmode); - mrdmode &= ~(0x30); - (void) pci_write_config_byte(dev, MRDMODE, mrdmode); - - /* Use MEMORY READ LINE for reads. - * NOTE: Although not mentioned in the PCI0646U specs, - * these bits are write only and won't be read - * back as set or not. The PCI0646U2 specs clarify - * this point. + /* + * Enable interrupts, select MEMORY READ LINE for reads. + * + * NOTE: although not mentioned in the PCI0646U specs, + * bits 0-1 are write only and won't be read back as + * set or not -- PCI0646U2 specs clarify this point. */ - (void) pci_write_config_byte(dev, MRDMODE, mrdmode | 0x02); - - /* Set reasonable active/recovery/address-setup values. */ - (void) pci_write_config_byte(dev, ARTTIM0, 0x40); - (void) pci_write_config_byte(dev, DRWTIM0, 0x3f); - (void) pci_write_config_byte(dev, ARTTIM1, 0x40); - (void) pci_write_config_byte(dev, DRWTIM1, 0x3f); -#ifdef __i386__ - (void) pci_write_config_byte(dev, ARTTIM23, 0x1c); -#else - (void) pci_write_config_byte(dev, ARTTIM23, 0x5c); -#endif - (void) pci_write_config_byte(dev, DRWTIM23, 0x3f); - (void) pci_write_config_byte(dev, DRWTIM3, 0x3f); -#ifdef CONFIG_PPC - (void) pci_write_config_byte(dev, UDIDETCR0, 0xf0); -#endif /* CONFIG_PPC */ + (void) pci_read_config_byte (dev, MRDMODE, &mrdmode); + mrdmode &= ~0x30; + (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02)); #if defined(DISPLAY_CMD64X_TIMINGS) && defined(CONFIG_IDE_PROC_FS) @@ -550,27 +519,25 @@ static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const cha static unsigned int __devinit ata66_cmd64x(ide_hwif_t *hwif) { - u8 ata66 = 0, mask = (hwif->channel) ? 0x02 : 0x01; + struct pci_dev *dev = hwif->pci_dev; + u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01; - switch(hwif->pci_dev->device) { - case PCI_DEVICE_ID_CMD_643: - case PCI_DEVICE_ID_CMD_646: - return ata66; - default: - break; + switch (dev->device) { + case PCI_DEVICE_ID_CMD_648: + case PCI_DEVICE_ID_CMD_649: + pci_read_config_byte(dev, BMIDECSR, &bmidecsr); + return (bmidecsr & mask) ? 1 : 0; + default: + return 0; } - pci_read_config_byte(hwif->pci_dev, BMIDECSR, &ata66); - return (ata66 & mask) ? 1 : 0; } static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) { struct pci_dev *dev = hwif->pci_dev; - unsigned int class_rev; + u8 rev = 0; - hwif->autodma = 0; - pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev); - class_rev &= 0xff; + pci_read_config_byte(dev, PCI_REVISION_ID, &rev); hwif->tuneproc = &cmd64x_tune_drive; hwif->speedproc = &cmd64x_tune_chipset; @@ -580,8 +547,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) if (!hwif->dma_base) return; - hwif->atapi_dma = 1; - + hwif->atapi_dma = 1; + hwif->mwdma_mask = 0x07; hwif->ultra_mask = hwif->cds->udma_mask; /* @@ -596,16 +563,15 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) * * So we only do UltraDMA on revision 0x05 and 0x07 chipsets. */ - if (dev->device == PCI_DEVICE_ID_CMD_646 && class_rev < 5) + if (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 5) hwif->ultra_mask = 0x00; - hwif->mwdma_mask = 0x07; - hwif->ide_dma_check = &cmd64x_config_drive_for_dma; - if (!(hwif->udma_four)) + + if (!hwif->udma_four) hwif->udma_four = ata66_cmd64x(hwif); - switch(dev->device) { + switch (dev->device) { case PCI_DEVICE_ID_CMD_648: case PCI_DEVICE_ID_CMD_649: alt_irq_bits: @@ -614,10 +580,10 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) break; case PCI_DEVICE_ID_CMD_646: hwif->chipset = ide_cmd646; - if (class_rev == 0x01) { + if (rev == 0x01) { hwif->ide_dma_end = &cmd646_1_ide_dma_end; break; - } else if (class_rev >= 0x03) + } else if (rev >= 0x03) goto alt_irq_bits; /* fall thru */ default: @@ -626,11 +592,9 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif) break; } - if (!noautodma) hwif->autodma = 1; - hwif->drives[0].autodma = hwif->autodma; - hwif->drives[1].autodma = hwif->autodma; + hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma; } static int __devinit init_setup_cmd64x(struct pci_dev *dev, ide_pci_device_t *d) -- 2.41.1