From 82d2913e1d00dbae2b568cf749fc9db4143fbb4c Mon Sep 17 00:00:00 2001 From: Josh Karabin Date: Tue, 6 Jan 2009 18:17:44 -0500 Subject: [PATCH] NAND support for OMAP3 EVM This patch adds support for detecting NAND flash on OMAP3 EVM boards. It clones similar code from the 3430 SDP board files. Signed-off-by: Josh Karabin Signed-off-by: Tony Lindgren --- arch/arm/configs/omap3_evm_defconfig | 11 ++- arch/arm/mach-omap2/board-omap3evm-flash.c | 99 +++++++++++++++++++--- 2 files changed, 96 insertions(+), 14 deletions(-) diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index e42fe8cd95d..f276c3a3bce 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -503,7 +503,16 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_OMAP2=y +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y # CONFIG_MTD_ONENAND_GENERIC is not set diff --git a/arch/arm/mach-omap2/board-omap3evm-flash.c b/arch/arm/mach-omap2/board-omap3evm-flash.c index 5f3663daf4f..8d96e35b91f 100644 --- a/arch/arm/mach-omap2/board-omap3evm-flash.c +++ b/arch/arm/mach-omap2/board-omap3evm-flash.c @@ -27,29 +27,29 @@ static int omap3evm_onenand_setup(void __iomem *, int freq); static struct mtd_partition omap3evm_onenand_partitions[] = { { - .name = "xloader", + .name = "xloader-onenand", .offset = 0, .size = 4*(64*2048), .mask_flags = MTD_WRITEABLE }, { - .name = "uboot", + .name = "uboot-onenand", .offset = MTDPART_OFS_APPEND, .size = 15*(64*2048), .mask_flags = MTD_WRITEABLE }, { - .name = "params", + .name = "params-onenand", .offset = MTDPART_OFS_APPEND, .size = 1*(64*2048), }, { - .name = "linux", + .name = "linux-onenand", .offset = MTDPART_OFS_APPEND, .size = 40*(64*2048), }, { - .name = "jffs2", + .name = "jffs2-onenand", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -70,6 +70,60 @@ static struct platform_device omap3evm_onenand_device = { }, }; +static struct mtd_partition omap3evm_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "xloader-nand", + .offset = 0, + .size = 4*(128 * 1024), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "uboot-nand", + .offset = MTDPART_OFS_APPEND, + .size = 14*(128 * 1024), + .mask_flags = MTD_WRITEABLE + }, + { + .name = "params-nand", + + .offset = MTDPART_OFS_APPEND, + .size = 2*(128 * 1024) + }, + { + .name = "linux-nand", + .offset = MTDPART_OFS_APPEND, + .size = 40*(128 * 1024) + }, + { + .name = "jffs2-nand", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; + +static struct omap_nand_platform_data omap3evm_nand_data = { + .parts = omap3evm_nand_partitions, + .nr_parts = ARRAY_SIZE(omap3evm_nand_partitions), + .nand_setup = NULL, + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ + .dev_ready = NULL, +}; + +static struct resource omap3evm_nand_resource = { + .flags = IORESOURCE_MEM, +}; + +static struct platform_device omap3evm_nand_device = { + .name = "omap2-nand", + .id = 0, + .dev = { + .platform_data = &omap3evm_nand_data, + }, + .num_resources = 1, + .resource = &omap3evm_nand_resource, +}; + /* * omap3evm_onenand_setup - Set the onenand sync mode * @onenand_base: The onenand base address in GPMC memory map @@ -85,29 +139,48 @@ static int omap3evm_onenand_setup(void __iomem *onenand_base, int freq) void __init omap3evm_flash_init(void) { u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; + u8 onenandcs = GPMC_CS_NUM + 1, nandcs = GPMC_CS_NUM + 1; + u32 gpmc_base_add = OMAP34XX_GPMC_VIRT; while (cs < GPMC_CS_NUM) { u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); /* - * xloader/Uboot would have programmed the oneNAND + * xloader/Uboot would have programmed the NAND/oneNAND * base address for us This is a ugly hack. The proper * way of doing this is to pass the setup of u-boot up * to kernel using kernel params - something on the - * lines of machineID. Check if oneNAND is configured + * lines of machineID. Check if NAND/oneNAND is configured */ - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - onenandcs = cs; + if ((ret & 0xC00) == 0x800) { + /* Found it!! */ + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } else { + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); + if ((ret & 0x3F) == (ONENAND_MAP >> 24)) + onenandcs = cs; + } cs++; } - if (onenandcs > GPMC_CS_NUM) { - printk(KERN_INFO "OneNAND: Unable to find configuration " + if ((nandcs > GPMC_CS_NUM) && (onenandcs > GPMC_CS_NUM)) { + printk(KERN_INFO "NAND/OneNAND: Unable to find configuration " " in GPMC\n "); return; } + if (nandcs < GPMC_CS_NUM) { + omap3evm_nand_data.cs = nandcs; + omap3evm_nand_data.gpmc_cs_baseaddr = (void *)(gpmc_base_add + + GPMC_CS0_BASE + nandcs*GPMC_CS_SIZE); + omap3evm_nand_data.gpmc_baseaddr = (void *) (gpmc_base_add); + + if (platform_device_register(&omap3evm_nand_device) < 0) { + printk(KERN_ERR "Unable to register NAND device\n"); + } + } + if (onenandcs < GPMC_CS_NUM) { omap3evm_onenand_data.cs = onenandcs; if (platform_device_register(&omap3evm_onenand_device) < 0) -- 2.41.1