From 7e9400f178d291b2208c4ed9aac0f425c1364000 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 11 Jun 2007 21:37:46 -0400 Subject: [PATCH] [PATCH] eeprom_93cx6: shorten pulse timing to match spec 93cx6 datasheet available here: http://ww1.microchip.com/downloads/en/DeviceDoc/21749F.pdf Figure 1-1 and Table 1-2 on pages 4-5 indicate that both Clock High Time and Clock Low Time have largest minimum times of 450ns. Signed-off-by: John W. Linville --- drivers/misc/eeprom_93cx6.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c index 0d6d742d42c..ac515b0ef67 100644 --- a/drivers/misc/eeprom_93cx6.c +++ b/drivers/misc/eeprom_93cx6.c @@ -42,10 +42,10 @@ static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom) /* * Add a short delay for the pulse to work. - * According to the specifications the minimal time - * should be 450ns so a 1us delay is sufficient. + * According to the specifications the "maximum minimum" + * time should be 450ns. */ - udelay(1); + ndelay(450); } static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom) -- 2.41.1