From 7e0e44d430281d398769f1d7864e161203252760 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 19 Feb 2009 08:15:49 +0100 Subject: [PATCH] ALSA: hda - Add digital-only mode for ALC268 ALC268 can be configured as digital-only, e.g. for HDMI, on some machines. Allow the parser to set up the digital-only mode. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index df32f9353e7..169b3837af5 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11824,9 +11824,14 @@ static int alc268_parse_auto_config(struct hda_codec *codec) alc268_ignore); if (err < 0) return err; - if (!spec->autocfg.line_outs) + if (!spec->autocfg.line_outs) { + if (spec->autocfg.dig_outs || spec->autocfg.dig_in_pin) { + spec->multiout.max_channels = 2; + spec->no_analog = 1; + goto dig_only; + } return 0; /* can't find valid BIOS pin config */ - + } err = alc268_auto_create_multi_out_ctls(spec, &spec->autocfg); if (err < 0) return err; @@ -11836,10 +11841,12 @@ static int alc268_parse_auto_config(struct hda_codec *codec) spec->multiout.max_channels = 2; + dig_only: /* digital only support output */ - if (spec->autocfg.dig_outs) + if (spec->autocfg.dig_outs) { spec->multiout.dig_out_nid = ALC268_DIGOUT_NID; - + spec->dig_out_type = spec->autocfg.dig_out_type[0]; + } if (spec->kctls.list) add_mixer(spec, spec->kctls.list); @@ -12140,7 +12147,7 @@ static int patch_alc268(struct hda_codec *codec) (0 << AC_AMPCAP_MUTE_SHIFT)); } - if (!spec->adc_nids && spec->input_mux) { + if (!spec->no_analog && !spec->adc_nids && spec->input_mux) { /* check whether NID 0x07 is valid */ unsigned int wcap = get_wcaps(codec, 0x07); int i; @@ -12764,7 +12771,7 @@ static int alc269_parse_auto_config(struct hda_codec *codec) if (err < 0) return err; - if (!spec->cap_mixer) + if (!spec->cap_mixer && !spec->no_analog) set_capture_mixer(spec); store_pin_configs(codec); -- 2.41.1