From 7670df73fba373d19471a2ebedb3302ea0607be0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Thu, 11 Oct 2007 23:53:59 +0200 Subject: [PATCH] ide: mode limiting fixes for user requested speed changes * Add an extra argument to ide_max_dma_mode() for passing requested transfer mode. Use it as an upper limit when finding the best DMA for device/host. * Rename ide_max_dma_mode() to ide_find_dma_mode() and at the same time add ide_max_dma_mode() wrapper which passes XFER_UDMA_6 as a requested mode to ide_find_dma_mode(). Also add inline ide_find_dma_mode() version for CONFIG_BLK_DEV_IDEDMA=n case. * Pass requested transfer mode from ide_find_dma_mode() to ide_get_mode_mask() to avoid false warning from eighty_ninty_three(). * Use ide_find_dma_mode() to limit the user requested transfer mode in ide_rate_filter(). Also limit the requested mode by host max PIO mode. Above changes make ide_rate_filter() to: * Clip desired transfer mode down if it is invalid (values 0x0F, 0x13-0x19 and 0x25-0x39, values > 0x46 were already clipped down, same for values 0x25-0x39 but iff UDMA was not supported by the host). * Clip desired transfer mode down if it is currently unsupported by IDE core (PIO6 and MWDMA3-4, the latter were already clipped down but iff UDMA was not supported by the host). * Clip desired transfer mode down according to the host capabilities (UDMA modes were already clipped down but MWDMA/SWDMA/PIO weren't, also ->atapi_dma flag was not respected). * Clip desired transfer mode down according to the device capabilities (except PIO modes for now which require mode work) - shouldn't be a problem since ide_set_xfer_rate() is called _after_ device has accepted given transfer mode. and also result in a number of host driver specific bugfixes: * icside - clip unsupported PIO5 mode down - fix unsupported/invalid modes being set in drive->current_speed * ide-cris - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices - fix BUG() on unsupported/invalid modes * au1xxx-ide - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 (if BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=n) modes down * aec62xx - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices - fix 0x00 being programmed as PIO timing for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * alim15x3 - clip DMA modes down for ATAPI devices (chipset revision == 0x20 only) - fix theoretical OOPS for 0x0F mode - fix unsupported/invalid modes being set on the device * amd74xx - clip unsupported SWDMA0-2 (on COBRA_7401 revs <= 7) modes down - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * atiixp - clip unsupported PIO5 and SWDMA0-2 modes down - fix cached MWDMA mode being cleared for unsupported/invalid modes - fix PIO{0,2} timings being programmed for unsupported/invalid modes - fix theoretical OOPS for PIO5-6 and 0x0F modes - fix unsupported/invalid modes being set on the device * cmd64x - clip unsupported SWDMA0-2 modes down * cs5530 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix BUG() on unsupported/invalid modes (which happened if the device accepted the setting) * cs5535 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix theoretical OOPS for PIO5-6 and 0x0F modes * hpt34x - clip DMA modes down for ATAPI devices - fix invalid timings being programmed for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * hpt366 - clip unsupported PIO5 and SWDMA0-2 modes down - fix PIO0 timings being programmed for unsupported/invalid modes - fix DMA timings being cleared for MWDMA3-4 and 0x25-0x39 modes - fix unsupported/invalid modes being set on the device * it8213 - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * it821x - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices (chipset in smart mode and revision 0x10 in pass-through mode) * jmicron - clip unsupported SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device * pdc202xx_new - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device * pdc202xx_old - clip unsupported PIO5 mode down - fix incorrect timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * piix - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * sc1200 - clip unsupported PIO5 and SWDMA0-2 modes down - fix unsupported/invalid modes being set on the device - fix BUG() on unsupported/invalid modes (which happened if the device accepted the setting) * scc_pata - clip unsupported PIO5, SWDMA0-2 and MWDMA0-2 modes down * serverworks - clip unsupported PIO5 and SWDMA0-2 modes down - fix DMA/UDMA timings/settings being cleared for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * siimage - clip unsupported PIO5 and SWDMA0-2 modes down - clip DMA modes down for ATAPI devices (SATA chipsets) * sis5513 - clip unsupported PIO5 mode down - fix BUG() on unsupported/invalid modes * sl82c105 - clip unsupported SWDMA0-2 modes down * slc90e66 - clip unsupported PIO5, SWDMA0-1 and MWDMA0 modes down * tc86c001 - clip unsupported PIO5 and SWDMA0-2 modes down - fix PIO0 timings being programmed for PIO5/0x0F/SWDMA0-2/0x13-0x19 modes - fix invalid 0x00 DMA timing being programmed for MWDMA3-4/0x25-0x39 modes - fix unsupported/invalid modes being set on the device * triflex - clip unsupported PIO5 mode down * via82cxxx - fix random PIO timings being set for unsupported/invalid modes - fix unsupported/invalid modes being set on the device * pmac - clip unsupported PIO5 and SWDMA0-2 modes down * cmd640/ht6560b - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y) - fix PIO5 being clipped to PIO4 (if CONFIG_BLK_DEV_IDEDMA=n) * opti621 - clip DMA modes down (if CONFIG_BLK_DEV_IDEDMA=y) - clip unsupported PIO4 to PIO3 (if CONFIG_BLK_DEV_IDEDMA=n) While at it: * Use ide_rate_filter() in cs5520.c::cs5520_tune_chipset(). * Remove no longer needed checks from hpt366.c::hpt3{6,7}x_tune_chipset(). Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-dma.c | 32 +++++++++++++++++++++----------- drivers/ide/ide-lib.c | 29 ++++++++--------------------- drivers/ide/pci/cs5520.c | 2 +- drivers/ide/pci/hpt366.c | 8 -------- include/linux/ide.h | 10 +++++++++- 5 files changed, 39 insertions(+), 42 deletions(-) diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index f073ea35da0..6000c08f51b 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -653,7 +653,7 @@ static const u8 xfer_mode_bases[] = { XFER_SW_DMA_0, }; -static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) +static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base, u8 req_mode) { struct hd_driveid *id = drive->id; ide_hwif_t *hwif = drive->hwif; @@ -670,8 +670,13 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) mask = hwif->ultra_mask; mask &= id->dma_ultra; - if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) - mask &= 0x07; + /* + * avoid false cable warning from eighty_ninty_three() + */ + if (req_mode > XFER_UDMA_2) { + if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) + mask &= 0x07; + } break; case XFER_MW_DMA_0: if ((id->field_valid & 2) == 0) @@ -709,15 +714,18 @@ static unsigned int ide_get_mode_mask(ide_drive_t *drive, u8 base) } /** - * ide_max_dma_mode - compute DMA speed + * ide_find_dma_mode - compute DMA speed * @drive: IDE device + * @req_mode: requested mode + * + * Checks the drive/host capabilities and finds the speed to use for + * the DMA transfer. The speed is then limited by the requested mode. * - * Checks the drive capabilities and returns the speed to use - * for the DMA transfer. Returns 0 if the drive is incapable - * of DMA transfers. + * Returns 0 if the drive/host combination is incapable of DMA transfers + * or if the requested mode is not a DMA mode. */ -u8 ide_max_dma_mode(ide_drive_t *drive) +u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode) { ide_hwif_t *hwif = drive->hwif; unsigned int mask; @@ -728,7 +736,9 @@ u8 ide_max_dma_mode(ide_drive_t *drive) return 0; for (i = 0; i < ARRAY_SIZE(xfer_mode_bases); i++) { - mask = ide_get_mode_mask(drive, xfer_mode_bases[i]); + if (req_mode < xfer_mode_bases[i]) + continue; + mask = ide_get_mode_mask(drive, xfer_mode_bases[i], req_mode); x = fls(mask) - 1; if (x >= 0) { mode = xfer_mode_bases[i] + x; @@ -738,10 +748,10 @@ u8 ide_max_dma_mode(ide_drive_t *drive) printk(KERN_DEBUG "%s: selected mode 0x%x\n", drive->name, mode); - return mode; + return min(mode, req_mode); } -EXPORT_SYMBOL_GPL(ide_max_dma_mode); +EXPORT_SYMBOL_GPL(ide_find_dma_mode); int ide_tune_dma(ide_drive_t *drive) { diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 92a6c7bcf52..41a128f5211 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -76,37 +76,24 @@ EXPORT_SYMBOL(ide_xfer_verbose); * Given the available transfer modes this function returns * the best available speed at or below the speed requested. * - * FIXME: filter also PIO/SWDMA/MWDMA modes + * TODO: check device PIO capabilities */ u8 ide_rate_filter(ide_drive_t *drive, u8 speed) { -#ifdef CONFIG_BLK_DEV_IDEDMA ide_hwif_t *hwif = drive->hwif; - u8 mask = hwif->ultra_mask, mode = XFER_MW_DMA_2; - - if (hwif->udma_filter) - mask = hwif->udma_filter(drive); - - /* - * TODO: speed > XFER_UDMA_2 extra check is needed to avoid false - * cable warning from eighty_ninty_three(), moving ide_rate_filter() - * calls from ->speedproc to core code will make this hack go away - */ - if (speed > XFER_UDMA_2) { - if ((mask & 0x78) && (eighty_ninty_three(drive) == 0)) - mask &= 0x07; - } + u8 mode = ide_find_dma_mode(drive, speed); - if (mask) - mode = fls(mask) - 1 + XFER_UDMA_0; + if (mode == 0) { + if (hwif->pio_mask) + mode = fls(hwif->pio_mask) - 1 + XFER_PIO_0; + else + mode = XFER_PIO_4; + } // printk("%s: mode 0x%02x, speed 0x%02x\n", __FUNCTION__, mode, speed); return min(speed, mode); -#else /* !CONFIG_BLK_DEV_IDEDMA */ - return min(speed, (u8)XFER_PIO_4); -#endif /* CONFIG_BLK_DEV_IDEDMA */ } EXPORT_SYMBOL(ide_rate_filter); diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c index b89e8165687..507981042c8 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/pci/cs5520.c @@ -70,7 +70,7 @@ static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed) { ide_hwif_t *hwif = HWIF(drive); struct pci_dev *pdev = hwif->pci_dev; - u8 speed = min((u8)XFER_PIO_4, xferspeed); + u8 speed = ide_rate_filter(drive, xferspeed); int pio = speed; u8 reg; int controller = drive->dn > 1 ? 1 : 0; diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index 3d8d6b2ee41..18c8ad091eb 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -610,10 +610,6 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) u32 old_itr = 0; u32 itr_mask, new_itr; - /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ - if (drive->media != ide_disk) - speed = min_t(u8, speed, XFER_PIO_4); - itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); @@ -642,10 +638,6 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) u32 old_itr = 0; u32 itr_mask, new_itr; - /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ - if (drive->media != ide_disk) - speed = min_t(u8, speed, XFER_PIO_4); - itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); diff --git a/include/linux/ide.h b/include/linux/ide.h index 80ea946282d..a3f9c216615 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1296,7 +1296,14 @@ int ide_in_drive_list(struct hd_driveid *, const struct drive_list_entry *); #ifdef CONFIG_BLK_DEV_IDEDMA int __ide_dma_bad_drive(ide_drive_t *); int __ide_dma_good_drive(ide_drive_t *); -u8 ide_max_dma_mode(ide_drive_t *); + +u8 ide_find_dma_mode(ide_drive_t *, u8); + +static inline u8 ide_max_dma_mode(ide_drive_t *drive) +{ + return ide_find_dma_mode(drive, XFER_UDMA_6); +} + int ide_tune_dma(ide_drive_t *); void ide_dma_off(ide_drive_t *); void ide_dma_verbose(ide_drive_t *); @@ -1322,6 +1329,7 @@ extern void ide_dma_timeout(ide_drive_t *); #endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ #else +static inline u8 ide_find_dma_mode(ide_drive_t *drive, u8 speed) { return 0; } static inline u8 ide_max_dma_mode(ide_drive_t *drive) { return 0; } static inline int ide_tune_dma(ide_drive_t *drive) { return 0; } static inline void ide_dma_off(ide_drive_t *drive) { ; } -- 2.41.1