From 74c4633da7994eddcfcd2762a448c6889cc2b5bd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 2 Sep 2008 14:36:11 -0700 Subject: [PATCH] rtc-cmos: wake again from S5 Update rtc-cmos shutdown handling to leave RTC alarms active, resolving http://bugzilla.kernel.org/show_bug.cgi?id=11411 on several boards. There are still some systems where the ACPI event handling doesn't cooperate. (Possibly related to bugid 11312, reporting the spontaneous disabling of RTC events.) Bug 11411 reported that changes to work around some ACPI event issues broke wake-from-S5 handling, as used for DVR applications. (They like to power off, then wake later to record programs.) [yakui.zhao@intel.com: add shutdown for PNP devices] [dbrownell@users.sourceforge.net: update comments] Signed-off-by: Rafael J. Wysocki Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: David Brownell Cc: Stefan Bauer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-cmos.c | 38 ++++++++++++++++++++++++++++++++------ 1 file changed, 32 insertions(+), 6 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 6ea349aba3b..b184367637d 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -800,7 +800,6 @@ static void __exit cmos_do_remove(struct device *dev) static int cmos_suspend(struct device *dev, pm_message_t mesg) { struct cmos_rtc *cmos = dev_get_drvdata(dev); - int do_wake = device_may_wakeup(dev); unsigned char tmp; /* only the alarm might be a wakeup event source */ @@ -809,7 +808,7 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) if (tmp & (RTC_PIE|RTC_AIE|RTC_UIE)) { unsigned char mask; - if (do_wake) + if (device_may_wakeup(dev)) mask = RTC_IRQMASK & ~RTC_AIE; else mask = RTC_IRQMASK; @@ -837,6 +836,17 @@ static int cmos_suspend(struct device *dev, pm_message_t mesg) return 0; } +/* We want RTC alarms to wake us from e.g. ACPI G2/S5 "soft off", even + * after a detour through G3 "mechanical off", although the ACPI spec + * says wakeup should only work from G1/S4 "hibernate". To most users, + * distinctions between S4 and S5 are pointless. So when the hardware + * allows, don't draw that distinction. + */ +static inline int cmos_poweroff(struct device *dev) +{ + return cmos_suspend(dev, PMSG_HIBERNATE); +} + static int cmos_resume(struct device *dev) { struct cmos_rtc *cmos = dev_get_drvdata(dev); @@ -884,6 +894,12 @@ static int cmos_resume(struct device *dev) #else #define cmos_suspend NULL #define cmos_resume NULL + +static inline int cmos_poweroff(struct device *dev) +{ + return -ENOSYS; +} + #endif /*----------------------------------------------------------------*/ @@ -903,10 +919,6 @@ static int cmos_resume(struct device *dev) static int __devinit cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { - /* REVISIT paranoia argues for a shutdown notifier, since PNP - * drivers can't provide shutdown() methods to disable IRQs. - * Or better yet, fix PNP to allow those methods... - */ if (pnp_port_start(pnp,0) == 0x70 && !pnp_irq_valid(pnp,0)) /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to @@ -942,6 +954,13 @@ static int cmos_pnp_resume(struct pnp_dev *pnp) #define cmos_pnp_resume NULL #endif +static void cmos_pnp_shutdown(struct device *pdev) +{ + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(pdev)) + return; + + cmos_do_shutdown(); +} static const struct pnp_device_id rtc_ids[] = { { .id = "PNP0b00", }, @@ -961,6 +980,10 @@ static struct pnp_driver cmos_pnp_driver = { .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, .suspend = cmos_pnp_suspend, .resume = cmos_pnp_resume, + .driver = { + .name = (char *)driver_name, + .shutdown = cmos_pnp_shutdown, + } }; #endif /* CONFIG_PNP */ @@ -986,6 +1009,9 @@ static int __exit cmos_platform_remove(struct platform_device *pdev) static void cmos_platform_shutdown(struct platform_device *pdev) { + if (system_state == SYSTEM_POWER_OFF && !cmos_poweroff(&pdev->dev)) + return; + cmos_do_shutdown(); } -- 2.41.1