From 705b6c7b34f2621f95f606d0e683daa10cdb8eb9 Mon Sep 17 00:00:00 2001 From: Paul Fulghum Date: Sun, 8 Jan 2006 01:02:06 -0800 Subject: [PATCH] [PATCH] new driver synclink_gt New character device driver for the SyncLink GT and SyncLink AC families of synchronous and asynchronous serial adapters Signed-off-by: Paul Fulghum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/Kconfig | 8 + drivers/char/Makefile | 1 + drivers/char/synclink_gt.c | 4501 ++++++++++++++++++++++++++++++++++++ include/linux/synclink.h | 9 +- 4 files changed, 4518 insertions(+), 1 deletion(-) create mode 100644 drivers/char/synclink_gt.c diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index b1b34edcd70..dd7e6901c57 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -220,6 +220,14 @@ config SYNCLINKMP The module will be called synclinkmp. If you want to do that, say M here. +config SYNCLINK_GT + tristate "SyncLink GT/AC support" + depends on SERIAL_NONSTANDARD + help + Support for SyncLink GT and SyncLink AC families of + synchronous and asynchronous serial adapters + manufactured by Microgate Systems, Ltd. (www.microgate.com) + config N_HDLC tristate "HDLC line discipline support" depends on SERIAL_NONSTANDARD diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 4aeae687e88..d973d14d8f7 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_RISCOM8) += riscom8.o obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_SYNCLINK) += synclink.o obj-$(CONFIG_SYNCLINKMP) += synclinkmp.o +obj-$(CONFIG_SYNCLINK_GT) += synclink_gt.o obj-$(CONFIG_N_HDLC) += n_hdlc.o obj-$(CONFIG_AMIGA_BUILTIN_SERIAL) += amiserial.o obj-$(CONFIG_SX) += sx.o generic_serial.o diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c new file mode 100644 index 00000000000..2b9cde94e2f --- /dev/null +++ b/drivers/char/synclink_gt.c @@ -0,0 +1,4501 @@ +/* + * $Id: synclink_gt.c,v 4.20 2005/11/08 19:51:55 paulkf Exp $ + * + * Device driver for Microgate SyncLink GT serial adapters. + * + * written by Paul Fulghum for Microgate Corporation + * paulkf@microgate.com + * + * Microgate and SyncLink are trademarks of Microgate Corporation + * + * This code is released under the GNU General Public License (GPL) + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES + * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED + * OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * DEBUG OUTPUT DEFINITIONS + * + * uncomment lines below to enable specific types of debug output + * + * DBGINFO information - most verbose output + * DBGERR serious errors + * DBGBH bottom half service routine debugging + * DBGISR interrupt service routine debugging + * DBGDATA output receive and transmit data + * DBGTBUF output transmit DMA buffers and registers + * DBGRBUF output receive DMA buffers and registers + */ + +#define DBGINFO(fmt) if (debug_level >= DEBUG_LEVEL_INFO) printk fmt +#define DBGERR(fmt) if (debug_level >= DEBUG_LEVEL_ERROR) printk fmt +#define DBGBH(fmt) if (debug_level >= DEBUG_LEVEL_BH) printk fmt +#define DBGISR(fmt) if (debug_level >= DEBUG_LEVEL_ISR) printk fmt +#define DBGDATA(info, buf, size, label) if (debug_level >= DEBUG_LEVEL_DATA) trace_block((info), (buf), (size), (label)) +//#define DBGTBUF(info) dump_tbufs(info) +//#define DBGRBUF(info) dump_rbufs(info) + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include "linux/synclink.h" + +#ifdef CONFIG_HDLC_MODULE +#define CONFIG_HDLC 1 +#endif + +/* + * module identification + */ +static char *driver_name = "SyncLink GT"; +static char *driver_version = "$Revision: 4.20 $"; +static char *tty_driver_name = "synclink_gt"; +static char *tty_dev_prefix = "ttySLG"; +MODULE_LICENSE("GPL"); +#define MGSL_MAGIC 0x5401 +#define MAX_DEVICES 12 + +static struct pci_device_id pci_table[] = { + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_GT4_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {PCI_VENDOR_ID_MICROGATE, SYNCLINK_AC_DEVICE_ID, PCI_ANY_ID, PCI_ANY_ID,}, + {0,}, /* terminate list */ +}; +MODULE_DEVICE_TABLE(pci, pci_table); + +static int init_one(struct pci_dev *dev,const struct pci_device_id *ent); +static void remove_one(struct pci_dev *dev); +static struct pci_driver pci_driver = { + .name = "synclink_gt", + .id_table = pci_table, + .probe = init_one, + .remove = __devexit_p(remove_one), +}; + +static int pci_registered; + +/* + * module configuration and status + */ +static struct slgt_info *slgt_device_list; +static int slgt_device_count; + +static int ttymajor; +static int debug_level; +static int maxframe[MAX_DEVICES]; +static int dosyncppp[MAX_DEVICES]; + +module_param(ttymajor, int, 0); +module_param(debug_level, int, 0); +module_param_array(maxframe, int, NULL, 0); +module_param_array(dosyncppp, int, NULL, 0); + +MODULE_PARM_DESC(ttymajor, "TTY major device number override: 0=auto assigned"); +MODULE_PARM_DESC(debug_level, "Debug syslog output: 0=disabled, 1 to 5=increasing detail"); +MODULE_PARM_DESC(maxframe, "Maximum frame size used by device (4096 to 65535)"); +MODULE_PARM_DESC(dosyncppp, "Enable synchronous net device, 0=disable 1=enable"); + +/* + * tty support and callbacks + */ +#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK)) + +static struct tty_driver *serial_driver; + +static int open(struct tty_struct *tty, struct file * filp); +static void close(struct tty_struct *tty, struct file * filp); +static void hangup(struct tty_struct *tty); +static void set_termios(struct tty_struct *tty, struct termios *old_termios); + +static int write(struct tty_struct *tty, const unsigned char *buf, int count); +static void put_char(struct tty_struct *tty, unsigned char ch); +static void send_xchar(struct tty_struct *tty, char ch); +static void wait_until_sent(struct tty_struct *tty, int timeout); +static int write_room(struct tty_struct *tty); +static void flush_chars(struct tty_struct *tty); +static void flush_buffer(struct tty_struct *tty); +static void tx_hold(struct tty_struct *tty); +static void tx_release(struct tty_struct *tty); + +static int ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg); +static int read_proc(char *page, char **start, off_t off, int count,int *eof, void *data); +static int chars_in_buffer(struct tty_struct *tty); +static void throttle(struct tty_struct * tty); +static void unthrottle(struct tty_struct * tty); +static void set_break(struct tty_struct *tty, int break_state); + +/* + * generic HDLC support and callbacks + */ +#ifdef CONFIG_HDLC +#define dev_to_port(D) (dev_to_hdlc(D)->priv) +static void hdlcdev_tx_done(struct slgt_info *info); +static void hdlcdev_rx(struct slgt_info *info, char *buf, int size); +static int hdlcdev_init(struct slgt_info *info); +static void hdlcdev_exit(struct slgt_info *info); +#endif + + +/* + * device specific structures, macros and functions + */ + +#define SLGT_MAX_PORTS 4 +#define SLGT_REG_SIZE 256 + +/* + * DMA buffer descriptor and access macros + */ +struct slgt_desc +{ + unsigned short count; + unsigned short status; + unsigned int pbuf; /* physical address of data buffer */ + unsigned int next; /* physical address of next descriptor */ + + /* driver book keeping */ + char *buf; /* virtual address of data buffer */ + unsigned int pdesc; /* physical address of this descriptor */ + dma_addr_t buf_dma_addr; +}; + +#define set_desc_buffer(a,b) (a).pbuf = cpu_to_le32((unsigned int)(b)) +#define set_desc_next(a,b) (a).next = cpu_to_le32((unsigned int)(b)) +#define set_desc_count(a,b)(a).count = cpu_to_le16((unsigned short)(b)) +#define set_desc_eof(a,b) (a).status = cpu_to_le16((b) ? (le16_to_cpu((a).status) | BIT0) : (le16_to_cpu((a).status) & ~BIT0)) +#define desc_count(a) (le16_to_cpu((a).count)) +#define desc_status(a) (le16_to_cpu((a).status)) +#define desc_complete(a) (le16_to_cpu((a).status) & BIT15) +#define desc_eof(a) (le16_to_cpu((a).status) & BIT2) +#define desc_crc_error(a) (le16_to_cpu((a).status) & BIT1) +#define desc_abort(a) (le16_to_cpu((a).status) & BIT0) +#define desc_residue(a) ((le16_to_cpu((a).status) & 0x38) >> 3) + +struct _input_signal_events { + int ri_up; + int ri_down; + int dsr_up; + int dsr_down; + int dcd_up; + int dcd_down; + int cts_up; + int cts_down; +}; + +/* + * device instance data structure + */ +struct slgt_info { + void *if_ptr; /* General purpose pointer (used by SPPP) */ + + struct slgt_info *next_device; /* device list link */ + + int magic; + int flags; + + char device_name[25]; + struct pci_dev *pdev; + + int port_count; /* count of ports on adapter */ + int adapter_num; /* adapter instance number */ + int port_num; /* port instance number */ + + /* array of pointers to port contexts on this adapter */ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + + int count; /* count of opens */ + int line; /* tty line instance number */ + unsigned short close_delay; + unsigned short closing_wait; /* time to wait before closing */ + + struct mgsl_icount icount; + + struct tty_struct *tty; + int timeout; + int x_char; /* xon/xoff character */ + int blocked_open; /* # of blocked opens */ + unsigned int read_status_mask; + unsigned int ignore_status_mask; + + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + wait_queue_head_t status_event_wait_q; + wait_queue_head_t event_wait_q; + struct timer_list tx_timer; + struct timer_list rx_timer; + + spinlock_t lock; /* spinlock for synchronizing with ISR */ + + struct work_struct task; + u32 pending_bh; + int bh_requested; + int bh_running; + + int isr_overflow; + int irq_requested; /* nonzero if IRQ requested */ + int irq_occurred; /* for diagnostics use */ + + /* device configuration */ + + unsigned int bus_type; + unsigned int irq_level; + unsigned long irq_flags; + + unsigned char __iomem * reg_addr; /* memory mapped registers address */ + u32 phys_reg_addr; + u32 reg_offset; + int reg_addr_requested; + + MGSL_PARAMS params; /* communications parameters */ + u32 idle_mode; + u32 max_frame_size; /* as set by device config */ + + unsigned int raw_rx_size; + unsigned int if_mode; + + /* device status */ + + int rx_enabled; + int rx_restart; + + int tx_enabled; + int tx_active; + + unsigned char signals; /* serial signal states */ + unsigned int init_error; /* initialization error */ + + unsigned char *tx_buf; + int tx_count; + + char flag_buf[MAX_ASYNC_BUFFER_SIZE]; + char char_buf[MAX_ASYNC_BUFFER_SIZE]; + BOOLEAN drop_rts_on_tx_done; + struct _input_signal_events input_signal_events; + + int dcd_chkcount; /* check counts to prevent */ + int cts_chkcount; /* too many IRQs if a signal */ + int dsr_chkcount; /* is floating */ + int ri_chkcount; + + char *bufs; /* virtual address of DMA buffer lists */ + dma_addr_t bufs_dma_addr; /* physical address of buffer descriptors */ + + unsigned int rbuf_count; + struct slgt_desc *rbufs; + unsigned int rbuf_current; + unsigned int rbuf_index; + + unsigned int tbuf_count; + struct slgt_desc *tbufs; + unsigned int tbuf_current; + unsigned int tbuf_start; + + unsigned char *tmp_rbuf; + unsigned int tmp_rbuf_count; + + /* SPPP/Cisco HDLC device parts */ + + int netcount; + int dosyncppp; + spinlock_t netlock; +#ifdef CONFIG_HDLC + struct net_device *netdev; +#endif + +}; + +static MGSL_PARAMS default_params = { + .mode = MGSL_MODE_HDLC, + .loopback = 0, + .flags = HDLC_FLAG_UNDERRUN_ABORT15, + .encoding = HDLC_ENCODING_NRZI_SPACE, + .clock_speed = 0, + .addr_filter = 0xff, + .crc_type = HDLC_CRC_16_CCITT, + .preamble_length = HDLC_PREAMBLE_LENGTH_8BITS, + .preamble = HDLC_PREAMBLE_PATTERN_NONE, + .data_rate = 9600, + .data_bits = 8, + .stop_bits = 1, + .parity = ASYNC_PARITY_NONE +}; + + +#define BH_RECEIVE 1 +#define BH_TRANSMIT 2 +#define BH_STATUS 4 +#define IO_PIN_SHUTDOWN_LIMIT 100 + +#define DMABUFSIZE 256 +#define DESC_LIST_SIZE 4096 + +#define MASK_PARITY BIT1 +#define MASK_FRAMING BIT2 +#define MASK_BREAK BIT3 +#define MASK_OVERRUN BIT4 + +#define GSR 0x00 /* global status */ +#define TDR 0x80 /* tx data */ +#define RDR 0x80 /* rx data */ +#define TCR 0x82 /* tx control */ +#define TIR 0x84 /* tx idle */ +#define TPR 0x85 /* tx preamble */ +#define RCR 0x86 /* rx control */ +#define VCR 0x88 /* V.24 control */ +#define CCR 0x89 /* clock control */ +#define BDR 0x8a /* baud divisor */ +#define SCR 0x8c /* serial control */ +#define SSR 0x8e /* serial status */ +#define RDCSR 0x90 /* rx DMA control/status */ +#define TDCSR 0x94 /* tx DMA control/status */ +#define RDDAR 0x98 /* rx DMA descriptor address */ +#define TDDAR 0x9c /* tx DMA descriptor address */ + +#define RXIDLE BIT14 +#define RXBREAK BIT14 +#define IRQ_TXDATA BIT13 +#define IRQ_TXIDLE BIT12 +#define IRQ_TXUNDER BIT11 /* HDLC */ +#define IRQ_RXDATA BIT10 +#define IRQ_RXIDLE BIT9 /* HDLC */ +#define IRQ_RXBREAK BIT9 /* async */ +#define IRQ_RXOVER BIT8 +#define IRQ_DSR BIT7 +#define IRQ_CTS BIT6 +#define IRQ_DCD BIT5 +#define IRQ_RI BIT4 +#define IRQ_ALL 0x3ff0 +#define IRQ_MASTER BIT0 + +#define slgt_irq_on(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) | (mask))) +#define slgt_irq_off(info, mask) \ + wr_reg16((info), SCR, (unsigned short)(rd_reg16((info), SCR) & ~(mask))) + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr); +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value); +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr); +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value); +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr); +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value); + +static void msc_set_vcr(struct slgt_info *info); + +static int startup(struct slgt_info *info); +static int block_til_ready(struct tty_struct *tty, struct file * filp,struct slgt_info *info); +static void shutdown(struct slgt_info *info); +static void program_hw(struct slgt_info *info); +static void change_params(struct slgt_info *info); + +static int register_test(struct slgt_info *info); +static int irq_test(struct slgt_info *info); +static int loopback_test(struct slgt_info *info); +static int adapter_test(struct slgt_info *info); + +static void reset_adapter(struct slgt_info *info); +static void reset_port(struct slgt_info *info); +static void async_mode(struct slgt_info *info); +static void hdlc_mode(struct slgt_info *info); + +static void rx_stop(struct slgt_info *info); +static void rx_start(struct slgt_info *info); +static void reset_rbufs(struct slgt_info *info); +static void free_rbufs(struct slgt_info *info, unsigned int first, unsigned int last); +static void rdma_reset(struct slgt_info *info); +static int rx_get_frame(struct slgt_info *info); +static int rx_get_buf(struct slgt_info *info); + +static void tx_start(struct slgt_info *info); +static void tx_stop(struct slgt_info *info); +static void tx_set_idle(struct slgt_info *info); +static unsigned int free_tbuf_count(struct slgt_info *info); +static void reset_tbufs(struct slgt_info *info); +static void tdma_reset(struct slgt_info *info); +static void tx_load(struct slgt_info *info, const char *buf, unsigned int count); + +static void get_signals(struct slgt_info *info); +static void set_signals(struct slgt_info *info); +static void enable_loopback(struct slgt_info *info); +static void set_rate(struct slgt_info *info, u32 data_rate); + +static int bh_action(struct slgt_info *info); +static void bh_handler(void* context); +static void bh_transmit(struct slgt_info *info); +static void isr_serial(struct slgt_info *info); +static void isr_rdma(struct slgt_info *info); +static void isr_txeom(struct slgt_info *info, unsigned short status); +static void isr_tdma(struct slgt_info *info); +static irqreturn_t slgt_interrupt(int irq, void *dev_id, struct pt_regs * regs); + +static int alloc_dma_bufs(struct slgt_info *info); +static void free_dma_bufs(struct slgt_info *info); +static int alloc_desc(struct slgt_info *info); +static void free_desc(struct slgt_info *info); +static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); +static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count); + +static int alloc_tmp_rbuf(struct slgt_info *info); +static void free_tmp_rbuf(struct slgt_info *info); + +static void tx_timeout(unsigned long context); +static void rx_timeout(unsigned long context); + +/* + * ioctl handlers + */ +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount); +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *params); +static int get_txidle(struct slgt_info *info, int __user *idle_mode); +static int set_txidle(struct slgt_info *info, int idle_mode); +static int tx_enable(struct slgt_info *info, int enable); +static int tx_abort(struct slgt_info *info); +static int rx_enable(struct slgt_info *info, int enable); +static int modem_input_wait(struct slgt_info *info,int arg); +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr); +static int tiocmget(struct tty_struct *tty, struct file *file); +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); +static void set_break(struct tty_struct *tty, int break_state); +static int get_interface(struct slgt_info *info, int __user *if_mode); +static int set_interface(struct slgt_info *info, int if_mode); + +/* + * driver functions + */ +static void add_device(struct slgt_info *info); +static void device_init(int adapter_num, struct pci_dev *pdev); +static int claim_resources(struct slgt_info *info); +static void release_resources(struct slgt_info *info); + +/* + * DEBUG OUTPUT CODE + */ +#ifndef DBGINFO +#define DBGINFO(fmt) +#endif +#ifndef DBGERR +#define DBGERR(fmt) +#endif +#ifndef DBGBH +#define DBGBH(fmt) +#endif +#ifndef DBGISR +#define DBGISR(fmt) +#endif + +#ifdef DBGDATA +static void trace_block(struct slgt_info *info, const char *data, int count, const char *label) +{ + int i; + int linecount; + printk("%s %s data:\n",info->device_name, label); + while(count) { + linecount = (count > 16) ? 16 : count; + for(i=0; i < linecount; i++) + printk("%02X ",(unsigned char)data[i]); + for(;i<17;i++) + printk(" "); + for(i=0;i=040 && data[i]<=0176) + printk("%c",data[i]); + else + printk("."); + } + printk("\n"); + data += linecount; + count -= linecount; + } +} +#else +#define DBGDATA(info, buf, size, label) +#endif + +#ifdef DBGTBUF +static void dump_tbufs(struct slgt_info *info) +{ + int i; + printk("tbuf_current=%d\n", info->tbuf_current); + for (i=0 ; i < info->tbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->tbufs[i].count), le16_to_cpu(info->tbufs[i].status)); + } +} +#else +#define DBGTBUF(info) +#endif + +#ifdef DBGRBUF +static void dump_rbufs(struct slgt_info *info) +{ + int i; + printk("rbuf_current=%d\n", info->rbuf_current); + for (i=0 ; i < info->rbuf_count ; i++) { + printk("%d: count=%04X status=%04X\n", + i, le16_to_cpu(info->rbufs[i].count), le16_to_cpu(info->rbufs[i].status)); + } +} +#else +#define DBGRBUF(info) +#endif + +static inline int sanity_check(struct slgt_info *info, char *devname, const char *name) +{ +#ifdef SANITY_CHECK + if (!info) { + printk("null struct slgt_info for (%s) in %s\n", devname, name); + return 1; + } + if (info->magic != MGSL_MAGIC) { + printk("bad magic number struct slgt_info (%s) in %s\n", devname, name); + return 1; + } +#else + if (!info) + return 1; +#endif + return 0; +} + +/** + * line discipline callback wrappers + * + * The wrappers maintain line discipline references + * while calling into the line discipline. + * + * ldisc_receive_buf - pass receive data to line discipline + */ +static void ldisc_receive_buf(struct tty_struct *tty, + const __u8 *data, char *flags, int count) +{ + struct tty_ldisc *ld; + if (!tty) + return; + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->receive_buf) + ld->receive_buf(tty, data, flags, count); + tty_ldisc_deref(ld); + } +} + +/* tty callbacks */ + +static int open(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info; + int retval, line; + unsigned long flags; + + line = tty->index; + if ((line < 0) || (line >= slgt_device_count)) { + DBGERR(("%s: open with invalid line #%d.\n", driver_name, line)); + return -ENODEV; + } + + info = slgt_device_list; + while(info && info->line != line) + info = info->next_device; + if (sanity_check(info, tty->name, "open")) + return -ENODEV; + if (info->init_error) { + DBGERR(("%s init error=%d\n", info->device_name, info->init_error)); + return -ENODEV; + } + + tty->driver_data = info; + info->tty = tty; + + DBGINFO(("%s open, old ref count = %d\n", info->device_name, info->count)); + + /* If port is closing, signal caller to try again */ + if (tty_hung_up_p(filp) || info->flags & ASYNC_CLOSING){ + if (info->flags & ASYNC_CLOSING) + interruptible_sleep_on(&info->close_wait); + retval = ((info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS); + goto cleanup; + } + + info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + + spin_lock_irqsave(&info->netlock, flags); + if (info->netcount) { + retval = -EBUSY; + spin_unlock_irqrestore(&info->netlock, flags); + goto cleanup; + } + info->count++; + spin_unlock_irqrestore(&info->netlock, flags); + + if (info->count == 1) { + /* 1st open on this device, init hardware */ + retval = startup(info); + if (retval < 0) + goto cleanup; + } + + retval = block_til_ready(tty, filp, info); + if (retval) { + DBGINFO(("%s block_til_ready rc=%d\n", info->device_name, retval)); + goto cleanup; + } + + retval = 0; + +cleanup: + if (retval) { + if (tty->count == 1) + info->tty = NULL; /* tty layer will release tty struct */ + if(info->count) + info->count--; + } + + DBGINFO(("%s open rc=%d\n", info->device_name, retval)); + return retval; +} + +static void close(struct tty_struct *tty, struct file *filp) +{ + struct slgt_info *info = tty->driver_data; + + if (sanity_check(info, tty->name, "close")) + return; + DBGINFO(("%s close entry, count=%d\n", info->device_name, info->count)); + + if (!info->count) + return; + + if (tty_hung_up_p(filp)) + goto cleanup; + + if ((tty->count == 1) && (info->count != 1)) { + /* + * tty->count is 1 and the tty structure will be freed. + * info->count should be one in this case. + * if it's not, correct it so that the port is shutdown. + */ + DBGERR(("%s close: bad refcount; tty->count=1, " + "info->count=%d\n", info->device_name, info->count)); + info->count = 1; + } + + info->count--; + + /* if at least one open remaining, leave hardware active */ + if (info->count) + goto cleanup; + + info->flags |= ASYNC_CLOSING; + + /* set tty->closing to notify line discipline to + * only process XON/XOFF characters. Only the N_TTY + * discipline appears to use this (ppp does not). + */ + tty->closing = 1; + + /* wait for transmit data to clear all layers */ + + if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) { + DBGINFO(("%s call tty_wait_until_sent\n", info->device_name)); + tty_wait_until_sent(tty, info->closing_wait); + } + + if (info->flags & ASYNC_INITIALIZED) + wait_until_sent(tty, info->timeout); + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); + tty_ldisc_flush(tty); + + shutdown(info); + + tty->closing = 0; + info->tty = NULL; + + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + + info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + + wake_up_interruptible(&info->close_wait); + +cleanup: + DBGINFO(("%s close exit, count=%d\n", tty->driver->name, info->count)); +} + +static void hangup(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + + if (sanity_check(info, tty->name, "hangup")) + return; + DBGINFO(("%s hangup\n", info->device_name)); + + flush_buffer(tty); + shutdown(info); + + info->count = 0; + info->flags &= ~ASYNC_NORMAL_ACTIVE; + info->tty = NULL; + + wake_up_interruptible(&info->open_wait); +} + +static void set_termios(struct tty_struct *tty, struct termios *old_termios) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s set_termios\n", tty->driver->name)); + + /* just return if nothing has changed */ + if ((tty->termios->c_cflag == old_termios->c_cflag) + && (RELEVANT_IFLAG(tty->termios->c_iflag) + == RELEVANT_IFLAG(old_termios->c_iflag))) + return; + + change_params(info); + + /* Handle transition to B0 status */ + if (old_termios->c_cflag & CBAUD && + !(tty->termios->c_cflag & CBAUD)) { + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle transition away from B0 status */ + if (!(old_termios->c_cflag & CBAUD) && + tty->termios->c_cflag & CBAUD) { + info->signals |= SerialSignal_DTR; + if (!(tty->termios->c_cflag & CRTSCTS) || + !test_bit(TTY_THROTTLED, &tty->flags)) { + info->signals |= SerialSignal_RTS; + } + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + /* Handle turning off CRTSCTS */ + if (old_termios->c_cflag & CRTSCTS && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + tx_release(tty); + } +} + +static int write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int ret = 0; + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "write")) + goto cleanup; + DBGINFO(("%s write count=%d\n", info->device_name, count)); + + if (!tty || !info->tx_buf) + goto cleanup; + + if (count > info->max_frame_size) { + ret = -EIO; + goto cleanup; + } + + if (!count) + goto cleanup; + + if (info->params.mode == MGSL_MODE_RAW) { + unsigned int bufs_needed = (count/DMABUFSIZE); + unsigned int bufs_free = free_tbuf_count(info); + if (count % DMABUFSIZE) + ++bufs_needed; + if (bufs_needed > bufs_free) + goto cleanup; + } else { + if (info->tx_active) + goto cleanup; + if (info->tx_count) { + /* send accumulated data from send_char() calls */ + /* as frame and wait before accepting more data. */ + tx_load(info, info->tx_buf, info->tx_count); + goto start; + } + } + + ret = info->tx_count = count; + tx_load(info, buf, count); + goto start; + +start: + if (info->tx_count && !tty->stopped && !tty->hw_stopped) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + +cleanup: + DBGINFO(("%s write rc=%d\n", info->device_name, ret)); + return ret; +} + +static void put_char(struct tty_struct *tty, unsigned char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "put_char")) + return; + DBGINFO(("%s put_char(%d)\n", info->device_name, ch)); + if (!tty || !info->tx_buf) + return; + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active && (info->tx_count < info->max_frame_size)) + info->tx_buf[info->tx_count++] = ch; + spin_unlock_irqrestore(&info->lock,flags); +} + +static void send_xchar(struct tty_struct *tty, char ch) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "send_xchar")) + return; + DBGINFO(("%s send_xchar(%d)\n", info->device_name, ch)); + info->x_char = ch; + if (ch) { + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_enabled) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +static void wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct slgt_info *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + + if (!info ) + return; + if (sanity_check(info, tty->name, "wait_until_sent")) + return; + DBGINFO(("%s wait_until_sent entry\n", info->device_name)); + if (!(info->flags & ASYNC_INITIALIZED)) + goto exit; + + orig_jiffies = jiffies; + + /* Set check interval to 1/5 of estimated time to + * send a character, and make it at least 1. The check + * interval should also be less than the timeout. + * Note: use tight timings here to satisfy the NIST-PCTS. + */ + + if (info->params.data_rate) { + char_time = info->timeout/(32 * 5); + if (!char_time) + char_time++; + } else + char_time = 1; + + if (timeout) + char_time = min_t(unsigned long, char_time, timeout); + + while (info->tx_active) { + msleep_interruptible(jiffies_to_msecs(char_time)); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + +exit: + DBGINFO(("%s wait_until_sent exit\n", info->device_name)); +} + +static int write_room(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + int ret; + + if (sanity_check(info, tty->name, "write_room")) + return 0; + ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE; + DBGINFO(("%s write_room=%d\n", info->device_name, ret)); + return ret; +} + +static void flush_chars(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_chars")) + return; + DBGINFO(("%s flush_chars entry tx_count=%d\n", info->device_name, info->tx_count)); + + if (info->tx_count <= 0 || tty->stopped || + tty->hw_stopped || !info->tx_buf) + return; + + DBGINFO(("%s flush_chars start transmit\n", info->device_name)); + + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active && info->tx_count) { + tx_load(info, info->tx_buf,info->tx_count); + tx_start(info); + } + spin_unlock_irqrestore(&info->lock,flags); +} + +static void flush_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "flush_buffer")) + return; + DBGINFO(("%s flush_buffer\n", info->device_name)); + + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock,flags); + + wake_up_interruptible(&tty->write_wait); + tty_wakeup(tty); +} + +/* + * throttle (stop) transmitter + */ +static void tx_hold(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_hold")) + return; + DBGINFO(("%s tx_hold\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + if (info->tx_enabled && info->params.mode == MGSL_MODE_ASYNC) + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * release (start) transmitter + */ +static void tx_release(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "tx_release")) + return; + DBGINFO(("%s tx_release\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active && info->tx_count) { + tx_load(info, info->tx_buf, info->tx_count); + tx_start(info); + } + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * Service an IOCTL request + * + * Arguments + * + * tty pointer to tty instance data + * file pointer to associated file object for device + * cmd IOCTL command code + * arg command argument/context + * + * Return 0 if success, otherwise error code + */ +static int ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct slgt_info *info = tty->driver_data; + struct mgsl_icount cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; /* user space */ + unsigned long flags; + void __user *argp = (void __user *)arg; + + if (sanity_check(info, tty->name, "ioctl")) + return -ENODEV; + DBGINFO(("%s ioctl() cmd=%08X\n", info->device_name, cmd)); + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case MGSL_IOCGPARAMS: + return get_params(info, argp); + case MGSL_IOCSPARAMS: + return set_params(info, argp); + case MGSL_IOCGTXIDLE: + return get_txidle(info, argp); + case MGSL_IOCSTXIDLE: + return set_txidle(info, (int)arg); + case MGSL_IOCTXENABLE: + return tx_enable(info, (int)arg); + case MGSL_IOCRXENABLE: + return rx_enable(info, (int)arg); + case MGSL_IOCTXABORT: + return tx_abort(info); + case MGSL_IOCGSTATS: + return get_stats(info, argp); + case MGSL_IOCWAITEVENT: + return wait_mgsl_event(info, argp); + case TIOCMIWAIT: + return modem_input_wait(info,(int)arg); + case MGSL_IOCGIF: + return get_interface(info, argp); + case MGSL_IOCSIF: + return set_interface(info,(int)arg); + case TIOCGICOUNT: + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->lock,flags); + p_cuser = argp; + if (put_user(cnow.cts, &p_cuser->cts) || + put_user(cnow.dsr, &p_cuser->dsr) || + put_user(cnow.rng, &p_cuser->rng) || + put_user(cnow.dcd, &p_cuser->dcd) || + put_user(cnow.rx, &p_cuser->rx) || + put_user(cnow.tx, &p_cuser->tx) || + put_user(cnow.frame, &p_cuser->frame) || + put_user(cnow.overrun, &p_cuser->overrun) || + put_user(cnow.parity, &p_cuser->parity) || + put_user(cnow.brk, &p_cuser->brk) || + put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) + return -EFAULT; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +/* + * proc fs support + */ +static inline int line_info(char *buf, struct slgt_info *info) +{ + char stat_buf[30]; + int ret; + unsigned long flags; + + ret = sprintf(buf, "%s: IO=%08X IRQ=%d MaxFrameSize=%u\n", + info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + + /* output current serial signal states */ + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + stat_buf[0] = 0; + stat_buf[1] = 0; + if (info->signals & SerialSignal_RTS) + strcat(stat_buf, "|RTS"); + if (info->signals & SerialSignal_CTS) + strcat(stat_buf, "|CTS"); + if (info->signals & SerialSignal_DTR) + strcat(stat_buf, "|DTR"); + if (info->signals & SerialSignal_DSR) + strcat(stat_buf, "|DSR"); + if (info->signals & SerialSignal_DCD) + strcat(stat_buf, "|CD"); + if (info->signals & SerialSignal_RI) + strcat(stat_buf, "|RI"); + + if (info->params.mode != MGSL_MODE_ASYNC) { + ret += sprintf(buf+ret, "\tHDLC txok:%d rxok:%d", + info->icount.txok, info->icount.rxok); + if (info->icount.txunder) + ret += sprintf(buf+ret, " txunder:%d", info->icount.txunder); + if (info->icount.txabort) + ret += sprintf(buf+ret, " txabort:%d", info->icount.txabort); + if (info->icount.rxshort) + ret += sprintf(buf+ret, " rxshort:%d", info->icount.rxshort); + if (info->icount.rxlong) + ret += sprintf(buf+ret, " rxlong:%d", info->icount.rxlong); + if (info->icount.rxover) + ret += sprintf(buf+ret, " rxover:%d", info->icount.rxover); + if (info->icount.rxcrc) + ret += sprintf(buf+ret, " rxcrc:%d", info->icount.rxcrc); + } else { + ret += sprintf(buf+ret, "\tASYNC tx:%d rx:%d", + info->icount.tx, info->icount.rx); + if (info->icount.frame) + ret += sprintf(buf+ret, " fe:%d", info->icount.frame); + if (info->icount.parity) + ret += sprintf(buf+ret, " pe:%d", info->icount.parity); + if (info->icount.brk) + ret += sprintf(buf+ret, " brk:%d", info->icount.brk); + if (info->icount.overrun) + ret += sprintf(buf+ret, " oe:%d", info->icount.overrun); + } + + /* Append serial signal status to end */ + ret += sprintf(buf+ret, " %s\n", stat_buf+1); + + ret += sprintf(buf+ret, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n", + info->tx_active,info->bh_requested,info->bh_running, + info->pending_bh); + + return ret; +} + +/* Called to print information about devices + */ +static int read_proc(char *page, char **start, off_t off, int count, + int *eof, void *data) +{ + int len = 0, l; + off_t begin = 0; + struct slgt_info *info; + + len += sprintf(page, "synclink_gt driver:%s\n", driver_version); + + info = slgt_device_list; + while( info ) { + l = line_info(page + len, info); + len += l; + if (len+begin > off+count) + goto done; + if (len+begin < off) { + begin += len; + len = 0; + } + info = info->next_device; + } + + *eof = 1; +done: + if (off >= len+begin) + return 0; + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); +} + +/* + * return count of bytes in transmit buffer + */ +static int chars_in_buffer(struct tty_struct *tty) +{ + struct slgt_info *info = tty->driver_data; + if (sanity_check(info, tty->name, "chars_in_buffer")) + return 0; + DBGINFO(("%s chars_in_buffer()=%d\n", info->device_name, info->tx_count)); + return info->tx_count; +} + +/* + * signal remote device to throttle send data (our receive data) + */ +static void throttle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "throttle")) + return; + DBGINFO(("%s throttle\n", info->device_name)); + if (I_IXOFF(tty)) + send_xchar(tty, STOP_CHAR(tty)); + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->signals &= ~SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * signal remote device to stop throttling send data (our receive data) + */ +static void unthrottle(struct tty_struct * tty) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + if (sanity_check(info, tty->name, "unthrottle")) + return; + DBGINFO(("%s unthrottle\n", info->device_name)); + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + send_xchar(tty, START_CHAR(tty)); + } + if (tty->termios->c_cflag & CRTSCTS) { + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } +} + +/* + * set or clear transmit break condition + * break_state -1=set break condition, 0=clear + */ +static void set_break(struct tty_struct *tty, int break_state) +{ + struct slgt_info *info = tty->driver_data; + unsigned short value; + unsigned long flags; + + if (sanity_check(info, tty->name, "set_break")) + return; + DBGINFO(("%s set_break(%d)\n", info->device_name, break_state)); + + spin_lock_irqsave(&info->lock,flags); + value = rd_reg16(info, TCR); + if (break_state == -1) + value |= BIT6; + else + value &= ~BIT6; + wr_reg16(info, TCR, value); + spin_unlock_irqrestore(&info->lock,flags); +} + +#ifdef CONFIG_HDLC + +/** + * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.) + * set encoding and frame check sequence (FCS) options + * + * dev pointer to network device structure + * encoding serial encoding setting + * parity FCS setting + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_attach(struct net_device *dev, unsigned short encoding, + unsigned short parity) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned char new_encoding; + unsigned short new_crctype; + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + DBGINFO(("%s hdlcdev_attach\n", info->device_name)); + + switch (encoding) + { + case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break; + case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break; + case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break; + case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break; + case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break; + default: return -EINVAL; + } + + switch (parity) + { + case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break; + case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break; + case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break; + default: return -EINVAL; + } + + info->params.encoding = new_encoding; + info->params.crc_type = new_crctype;; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + + return 0; +} + +/** + * called by generic HDLC layer to send frame + * + * skb socket buffer containing HDLC frame + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + DBGINFO(("%s hdlc_xmit\n", dev->name)); + + /* stop sending until this frame completes */ + netif_stop_queue(dev); + + /* copy data to device buffers */ + info->tx_count = skb->len; + tx_load(info, skb->data, skb->len); + + /* update network statistics */ + stats->tx_packets++; + stats->tx_bytes += skb->len; + + /* done with socket buffer, so free it */ + dev_kfree_skb(skb); + + /* save start time for transmit timeout detection */ + dev->trans_start = jiffies; + + /* start hardware transmitter if necessary */ + spin_lock_irqsave(&info->lock,flags); + if (!info->tx_active) + tx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + + return 0; +} + +/** + * called by network layer when interface enabled + * claim resources and initialize hardware + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_open(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + int rc; + unsigned long flags; + + DBGINFO(("%s hdlcdev_open\n", dev->name)); + + /* generic HDLC layer open processing */ + if ((rc = hdlc_open(dev))) + return rc; + + /* arbitrate between network and tty opens */ + spin_lock_irqsave(&info->netlock, flags); + if (info->count != 0 || info->netcount != 0) { + DBGINFO(("%s hdlc_open busy\n", dev->name)); + spin_unlock_irqrestore(&info->netlock, flags); + return -EBUSY; + } + info->netcount=1; + spin_unlock_irqrestore(&info->netlock, flags); + + /* claim resources and init adapter */ + if ((rc = startup(info)) != 0) { + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + return rc; + } + + /* assert DTR and RTS, apply hardware settings */ + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + program_hw(info); + + /* enable network layer transmit */ + dev->trans_start = jiffies; + netif_start_queue(dev); + + /* inform generic HDLC layer of current DCD status */ + spin_lock_irqsave(&info->lock, flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock, flags); + hdlc_set_carrier(info->signals & SerialSignal_DCD, dev); + + return 0; +} + +/** + * called by network layer when interface is disabled + * shutdown hardware and release resources + * + * dev pointer to network device structure + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_close(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_close\n", dev->name)); + + netif_stop_queue(dev); + + /* shutdown adapter and release resources */ + shutdown(info); + + hdlc_close(dev); + + spin_lock_irqsave(&info->netlock, flags); + info->netcount=0; + spin_unlock_irqrestore(&info->netlock, flags); + + return 0; +} + +/** + * called by network layer to process IOCTL call to network device + * + * dev pointer to network device structure + * ifr pointer to network interface request structure + * cmd IOCTL command code + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + const size_t size = sizeof(sync_serial_settings); + sync_serial_settings new_line; + sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync; + struct slgt_info *info = dev_to_port(dev); + unsigned int flags; + + DBGINFO(("%s hdlcdev_ioctl\n", dev->name)); + + /* return error if TTY interface open */ + if (info->count) + return -EBUSY; + + if (cmd != SIOCWANDEV) + return hdlc_ioctl(dev, ifr, cmd); + + switch(ifr->ifr_settings.type) { + case IF_GET_IFACE: /* return current sync_serial_settings */ + + ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL; + if (ifr->ifr_settings.size < size) { + ifr->ifr_settings.size = size; /* data size wanted */ + return -ENOBUFS; + } + + flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + + switch (flags){ + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break; + case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break; + case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break; + default: new_line.clock_type = CLOCK_DEFAULT; + } + + new_line.clock_rate = info->params.clock_speed; + new_line.loopback = info->params.loopback ? 1:0; + + if (copy_to_user(line, &new_line, size)) + return -EFAULT; + return 0; + + case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */ + + if(!capable(CAP_NET_ADMIN)) + return -EPERM; + if (copy_from_user(&new_line, line, size)) + return -EFAULT; + + switch (new_line.clock_type) + { + case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break; + case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break; + case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break; + case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break; + case CLOCK_DEFAULT: flags = info->params.flags & + (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break; + default: return -EINVAL; + } + + if (new_line.loopback != 0 && new_line.loopback != 1) + return -EINVAL; + + info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL | + HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN | + HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL | + HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); + info->params.flags |= flags; + + info->params.loopback = new_line.loopback; + + if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG)) + info->params.clock_speed = new_line.clock_rate; + else + info->params.clock_speed = 0; + + /* if network interface up, reprogram hardware */ + if (info->netcount) + program_hw(info); + return 0; + + default: + return hdlc_ioctl(dev, ifr, cmd); + } +} + +/** + * called by network layer when transmit timeout is detected + * + * dev pointer to network device structure + */ +static void hdlcdev_tx_timeout(struct net_device *dev) +{ + struct slgt_info *info = dev_to_port(dev); + struct net_device_stats *stats = hdlc_stats(dev); + unsigned long flags; + + DBGINFO(("%s hdlcdev_tx_timeout\n", dev->name)); + + stats->tx_errors++; + stats->tx_aborted_errors++; + + spin_lock_irqsave(&info->lock,flags); + tx_stop(info); + spin_unlock_irqrestore(&info->lock,flags); + + netif_wake_queue(dev); +} + +/** + * called by device driver when transmit completes + * reenable network layer transmit if stopped + * + * info pointer to device instance information + */ +static void hdlcdev_tx_done(struct slgt_info *info) +{ + if (netif_queue_stopped(info->netdev)) + netif_wake_queue(info->netdev); +} + +/** + * called by device driver when frame received + * pass frame to network layer + * + * info pointer to device instance information + * buf pointer to buffer contianing frame data + * size count of data bytes in buf + */ +static void hdlcdev_rx(struct slgt_info *info, char *buf, int size) +{ + struct sk_buff *skb = dev_alloc_skb(size); + struct net_device *dev = info->netdev; + struct net_device_stats *stats = hdlc_stats(dev); + + DBGINFO(("%s hdlcdev_rx\n", dev->name)); + + if (skb == NULL) { + DBGERR(("%s: can't alloc skb, drop packet\n", dev->name)); + stats->rx_dropped++; + return; + } + + memcpy(skb_put(skb, size),buf,size); + + skb->protocol = hdlc_type_trans(skb, info->netdev); + + stats->rx_packets++; + stats->rx_bytes += size; + + netif_rx(skb); + + info->netdev->last_rx = jiffies; +} + +/** + * called by device driver when adding device instance + * do generic HDLC initialization + * + * info pointer to device instance information + * + * returns 0 if success, otherwise error code + */ +static int hdlcdev_init(struct slgt_info *info) +{ + int rc; + struct net_device *dev; + hdlc_device *hdlc; + + /* allocate and initialize network and HDLC layer objects */ + + if (!(dev = alloc_hdlcdev(info))) { + printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); + return -ENOMEM; + } + + /* for network layer reporting purposes only */ + dev->mem_start = info->phys_reg_addr; + dev->mem_end = info->phys_reg_addr + SLGT_REG_SIZE - 1; + dev->irq = info->irq_level; + + /* network layer callbacks and settings */ + dev->do_ioctl = hdlcdev_ioctl; + dev->open = hdlcdev_open; + dev->stop = hdlcdev_close; + dev->tx_timeout = hdlcdev_tx_timeout; + dev->watchdog_timeo = 10*HZ; + dev->tx_queue_len = 50; + + /* generic HDLC layer callbacks and settings */ + hdlc = dev_to_hdlc(dev); + hdlc->attach = hdlcdev_attach; + hdlc->xmit = hdlcdev_xmit; + + /* register objects with HDLC layer */ + if ((rc = register_hdlc_device(dev))) { + printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); + free_netdev(dev); + return rc; + } + + info->netdev = dev; + return 0; +} + +/** + * called by device driver when removing device instance + * do generic HDLC cleanup + * + * info pointer to device instance information + */ +static void hdlcdev_exit(struct slgt_info *info) +{ + unregister_hdlc_device(info->netdev); + free_netdev(info->netdev); + info->netdev = NULL; +} + +#endif /* ifdef CONFIG_HDLC */ + +/* + * get async data from rx DMA buffers + */ +static void rx_async(struct slgt_info *info) +{ + struct tty_struct *tty = info->tty; + struct mgsl_icount *icount = &info->icount; + unsigned int start, end; + unsigned char *p; + unsigned char status; + struct slgt_desc *bufs = info->rbufs; + int i, count; + + start = end = info->rbuf_current; + + while(desc_complete(bufs[end])) { + count = desc_count(bufs[end]) - info->rbuf_index; + p = bufs[end].buf + info->rbuf_index; + + DBGISR(("%s rx_async count=%d\n", info->device_name, count)); + DBGDATA(info, p, count, "rx"); + + for(i=0 ; i < count; i+=2, p+=2) { + if (tty) { + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + tty_flip_buffer_push(tty); + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + break; + *tty->flip.char_buf_ptr = *p; + *tty->flip.flag_buf_ptr = 0; + } + icount->rx++; + + if ((status = *(p+1) & (BIT9 + BIT8))) { + if (status & BIT9) + icount->parity++; + else if (status & BIT8) + icount->frame++; + /* discard char if tty control flags say so */ + if (status & info->ignore_status_mask) + continue; + if (tty) { + if (status & BIT9) + *tty->flip.flag_buf_ptr = TTY_PARITY; + else if (status & BIT8) + *tty->flip.flag_buf_ptr = TTY_FRAME; + } + } + if (tty) { + tty->flip.flag_buf_ptr++; + tty->flip.char_buf_ptr++; + tty->flip.count++; + } + } + + if (i < count) { + /* receive buffer not completed */ + info->rbuf_index += i; + info->rx_timer.expires = jiffies + 1; + add_timer(&info->rx_timer); + break; + } + + info->rbuf_index = 0; + free_rbufs(info, end, end); + + if (++end == info->rbuf_count) + end = 0; + + /* if entire list searched then no frame available */ + if (end == start) + break; + } + + if (tty && tty->flip.count) + tty_flip_buffer_push(tty); +} + +/* + * return next bottom half action to perform + */ +static int bh_action(struct slgt_info *info) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&info->lock,flags); + + if (info->pending_bh & BH_RECEIVE) { + info->pending_bh &= ~BH_RECEIVE; + rc = BH_RECEIVE; + } else if (info->pending_bh & BH_TRANSMIT) { + info->pending_bh &= ~BH_TRANSMIT; + rc = BH_TRANSMIT; + } else if (info->pending_bh & BH_STATUS) { + info->pending_bh &= ~BH_STATUS; + rc = BH_STATUS; + } else { + /* Mark BH routine as complete */ + info->bh_running = 0; + info->bh_requested = 0; + rc = 0; + } + + spin_unlock_irqrestore(&info->lock,flags); + + return rc; +} + +/* + * perform bottom half processing + */ +static void bh_handler(void* context) +{ + struct slgt_info *info = context; + int action; + + if (!info) + return; + info->bh_running = 1; + + while((action = bh_action(info))) { + switch (action) { + case BH_RECEIVE: + DBGBH(("%s bh receive\n", info->device_name)); + switch(info->params.mode) { + case MGSL_MODE_ASYNC: + rx_async(info); + break; + case MGSL_MODE_HDLC: + while(rx_get_frame(info)); + break; + case MGSL_MODE_RAW: + while(rx_get_buf(info)); + break; + } + /* restart receiver if rx DMA buffers exhausted */ + if (info->rx_restart) + rx_start(info); + break; + case BH_TRANSMIT: + bh_transmit(info); + break; + case BH_STATUS: + DBGBH(("%s bh status\n", info->device_name)); + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + break; + default: + DBGBH(("%s unknown action\n", info->device_name)); + break; + } + } + DBGBH(("%s bh_handler exit\n", info->device_name)); +} + +static void bh_transmit(struct slgt_info *info) +{ + struct tty_struct *tty = info->tty; + + DBGBH(("%s bh_transmit\n", info->device_name)); + if (tty) { + tty_wakeup(tty); + wake_up_interruptible(&tty->write_wait); + } +} + +static void dsr_change(struct slgt_info *info) +{ + get_signals(info); + DBGISR(("dsr_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dsr_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DSR); + return; + } + info->icount.dsr++; + if (info->signals & SerialSignal_DSR) + info->input_signal_events.dsr_up++; + else + info->input_signal_events.dsr_down++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void cts_change(struct slgt_info *info) +{ + get_signals(info); + DBGISR(("cts_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->cts_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_CTS); + return; + } + info->icount.cts++; + if (info->signals & SerialSignal_CTS) + info->input_signal_events.cts_up++; + else + info->input_signal_events.cts_down++; + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (info->flags & ASYNC_CTS_FLOW) { + if (info->tty) { + if (info->tty->hw_stopped) { + if (info->signals & SerialSignal_CTS) { + info->tty->hw_stopped = 0; + info->pending_bh |= BH_TRANSMIT; + return; + } + } else { + if (!(info->signals & SerialSignal_CTS)) + info->tty->hw_stopped = 1; + } + } + } +} + +static void dcd_change(struct slgt_info *info) +{ + get_signals(info); + DBGISR(("dcd_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->dcd_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_DCD); + return; + } + info->icount.dcd++; + if (info->signals & SerialSignal_DCD) { + info->input_signal_events.dcd_up++; + } else { + info->input_signal_events.dcd_down++; + } +#ifdef CONFIG_HDLC + if (info->netcount) + hdlc_set_carrier(info->signals & SerialSignal_DCD, info->netdev); +#endif + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; + + if (info->flags & ASYNC_CHECK_CD) { + if (info->signals & SerialSignal_DCD) + wake_up_interruptible(&info->open_wait); + else { + if (info->tty) + tty_hangup(info->tty); + } + } +} + +static void ri_change(struct slgt_info *info) +{ + get_signals(info); + DBGISR(("ri_change %s signals=%04X\n", info->device_name, info->signals)); + if ((info->ri_chkcount)++ == IO_PIN_SHUTDOWN_LIMIT) { + slgt_irq_off(info, IRQ_RI); + return; + } + info->icount.dcd++; + if (info->signals & SerialSignal_RI) { + info->input_signal_events.ri_up++; + } else { + info->input_signal_events.ri_down++; + } + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + info->pending_bh |= BH_STATUS; +} + +static void isr_serial(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + DBGISR(("%s isr_serial status=%04X\n", info->device_name, status)); + + wr_reg16(info, SSR, status); /* clear pending */ + + info->irq_occurred = 1; + + if (info->params.mode == MGSL_MODE_ASYNC) { + if (status & IRQ_TXIDLE) { + if (info->tx_count) + isr_txeom(info, status); + } + if ((status & IRQ_RXBREAK) && (status & RXBREAK)) { + info->icount.brk++; + /* process break detection if tty control allows */ + if (info->tty) { + if (!(status & info->ignore_status_mask)) { + if (info->read_status_mask & MASK_BREAK) { + *info->tty->flip.flag_buf_ptr = TTY_BREAK; + if (info->flags & ASYNC_SAK) + do_SAK(info->tty); + } + } + } + } + } else { + if (status & (IRQ_TXIDLE + IRQ_TXUNDER)) + isr_txeom(info, status); + + if (status & IRQ_RXIDLE) { + if (status & RXIDLE) + info->icount.rxidle++; + else + info->icount.exithunt++; + wake_up_interruptible(&info->event_wait_q); + } + + if (status & IRQ_RXOVER) + rx_start(info); + } + + if (status & IRQ_DSR) + dsr_change(info); + if (status & IRQ_CTS) + cts_change(info); + if (status & IRQ_DCD) + dcd_change(info); + if (status & IRQ_RI) + ri_change(info); +} + +static void isr_rdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, RDCSR); + + DBGISR(("%s isr_rdma status=%08x\n", info->device_name, status)); + + /* RDCSR (rx DMA control/status) + * + * 31..07 reserved + * 06 save status byte to DMA buffer + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, RDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4)) { + DBGISR(("%s isr_rdma rx_restart=1\n", info->device_name)); + info->rx_restart = 1; + } + info->pending_bh |= BH_RECEIVE; +} + +static void isr_tdma(struct slgt_info *info) +{ + unsigned int status = rd_reg32(info, TDCSR); + + DBGISR(("%s isr_tdma status=%08x\n", info->device_name, status)); + + /* TDCSR (tx DMA control/status) + * + * 31..06 reserved + * 05 error + * 04 eol (end of list) + * 03 eob (end of buffer) + * 02 IRQ enable + * 01 reset + * 00 enable + */ + wr_reg32(info, TDCSR, status); /* clear pending */ + + if (status & (BIT5 + BIT4 + BIT3)) { + // another transmit buffer has completed + // run bottom half to get more send data from user + info->pending_bh |= BH_TRANSMIT; + } +} + +static void isr_txeom(struct slgt_info *info, unsigned short status) +{ + DBGISR(("%s txeom status=%04x\n", info->device_name, status)); + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + tdma_reset(info); + reset_tbufs(info); + if (status & IRQ_TXUNDER) { + unsigned short val = rd_reg16(info, TCR); + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, TCR, val); /* clear reset bit */ + } + + if (info->tx_active) { + if (info->params.mode != MGSL_MODE_ASYNC) { + if (status & IRQ_TXUNDER) + info->icount.txunder++; + else if (status & IRQ_TXIDLE) + info->icount.txok++; + } + + info->tx_active = 0; + info->tx_count = 0; + + del_timer(&info->tx_timer); + + if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done) { + info->signals &= ~SerialSignal_RTS; + info->drop_rts_on_tx_done = 0; + set_signals(info); + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + { + if (info->tty && (info->tty->stopped || info->tty->hw_stopped)) { + tx_stop(info); + return; + } + info->pending_bh |= BH_TRANSMIT; + } + } +} + +/* interrupt service routine + * + * irq interrupt number + * dev_id device ID supplied during interrupt registration + * regs interrupted processor context + */ +static irqreturn_t slgt_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + struct slgt_info *info; + unsigned int gsr; + unsigned int i; + + DBGISR(("slgt_interrupt irq=%d entry\n", irq)); + + info = dev_id; + if (!info) + return IRQ_NONE; + + spin_lock(&info->lock); + + while((gsr = rd_reg32(info, GSR) & 0xffffff00)) { + DBGISR(("%s gsr=%08x\n", info->device_name, gsr)); + info->irq_occurred = 1; + for(i=0; i < info->port_count ; i++) { + if (info->port_array[i] == NULL) + continue; + if (gsr & (BIT8 << i)) + isr_serial(info->port_array[i]); + if (gsr & (BIT16 << (i*2))) + isr_rdma(info->port_array[i]); + if (gsr & (BIT17 << (i*2))) + isr_tdma(info->port_array[i]); + } + } + + for(i=0; i < info->port_count ; i++) { + struct slgt_info *port = info->port_array[i]; + + if (port && (port->count || port->netcount) && + port->pending_bh && !port->bh_running && + !port->bh_requested) { + DBGISR(("%s bh queued\n", port->device_name)); + schedule_work(&port->task); + port->bh_requested = 1; + } + } + + spin_unlock(&info->lock); + + DBGISR(("slgt_interrupt irq=%d exit\n", irq)); + return IRQ_HANDLED; +} + +static int startup(struct slgt_info *info) +{ + DBGINFO(("%s startup\n", info->device_name)); + + if (info->flags & ASYNC_INITIALIZED) + return 0; + + if (!info->tx_buf) { + info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (!info->tx_buf) { + DBGERR(("%s can't allocate tx buffer\n", info->device_name)); + return -ENOMEM; + } + } + + info->pending_bh = 0; + + memset(&info->icount, 0, sizeof(info->icount)); + + /* program hardware for current parameters */ + change_params(info); + + if (info->tty) + clear_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags |= ASYNC_INITIALIZED; + + return 0; +} + +/* + * called by close() and hangup() to shutdown hardware + */ +static void shutdown(struct slgt_info *info) +{ + unsigned long flags; + + if (!(info->flags & ASYNC_INITIALIZED)) + return; + + DBGINFO(("%s shutdown\n", info->device_name)); + + /* clear status wait queue because status changes */ + /* can't happen after shutting down the hardware */ + wake_up_interruptible(&info->status_event_wait_q); + wake_up_interruptible(&info->event_wait_q); + + del_timer_sync(&info->tx_timer); + del_timer_sync(&info->rx_timer); + + kfree(info->tx_buf); + info->tx_buf = NULL; + + spin_lock_irqsave(&info->lock,flags); + + tx_stop(info); + rx_stop(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + + if (!info->tty || info->tty->termios->c_cflag & HUPCL) { + info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + } + + spin_unlock_irqrestore(&info->lock,flags); + + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + + info->flags &= ~ASYNC_INITIALIZED; +} + +static void program_hw(struct slgt_info *info) +{ + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + + rx_stop(info); + tx_stop(info); + + if (info->params.mode == MGSL_MODE_HDLC || + info->params.mode == MGSL_MODE_RAW || + info->netcount) + hdlc_mode(info); + else + async_mode(info); + + set_signals(info); + + info->dcd_chkcount = 0; + info->cts_chkcount = 0; + info->ri_chkcount = 0; + info->dsr_chkcount = 0; + + slgt_irq_on(info, IRQ_DCD | IRQ_CTS | IRQ_DSR); + get_signals(info); + + if (info->netcount || + (info->tty && info->tty->termios->c_cflag & CREAD)) + rx_start(info); + + spin_unlock_irqrestore(&info->lock,flags); +} + +/* + * reconfigure adapter based on new parameters + */ +static void change_params(struct slgt_info *info) +{ + unsigned cflag; + int bits_per_char; + + if (!info->tty || !info->tty->termios) + return; + DBGINFO(("%s change_params\n", info->device_name)); + + cflag = info->tty->termios->c_cflag; + + /* if B0 rate (hangup) specified then negate DTR and RTS */ + /* otherwise assert DTR and RTS */ + if (cflag & CBAUD) + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + else + info->signals &= ~(SerialSignal_RTS + SerialSignal_DTR); + + /* byte size and parity */ + + switch (cflag & CSIZE) { + case CS5: info->params.data_bits = 5; break; + case CS6: info->params.data_bits = 6; break; + case CS7: info->params.data_bits = 7; break; + case CS8: info->params.data_bits = 8; break; + default: info->params.data_bits = 7; break; + } + + info->params.stop_bits = (cflag & CSTOPB) ? 2 : 1; + + if (cflag & PARENB) + info->params.parity = (cflag & PARODD) ? ASYNC_PARITY_ODD : ASYNC_PARITY_EVEN; + else + info->params.parity = ASYNC_PARITY_NONE; + + /* calculate number of jiffies to transmit a full + * FIFO (32 bytes) at specified data rate + */ + bits_per_char = info->params.data_bits + + info->params.stop_bits + 1; + + info->params.data_rate = tty_get_baud_rate(info->tty); + + if (info->params.data_rate) { + info->timeout = (32*HZ*bits_per_char) / + info->params.data_rate; + } + info->timeout += HZ/50; /* Add .02 seconds of slop */ + + if (cflag & CRTSCTS) + info->flags |= ASYNC_CTS_FLOW; + else + info->flags &= ~ASYNC_CTS_FLOW; + + if (cflag & CLOCAL) + info->flags &= ~ASYNC_CHECK_CD; + else + info->flags |= ASYNC_CHECK_CD; + + /* process tty input control flags */ + + info->read_status_mask = IRQ_RXOVER; + if (I_INPCK(info->tty)) + info->read_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + info->read_status_mask |= MASK_BREAK; + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= MASK_PARITY | MASK_FRAMING; + if (I_IGNBRK(info->tty)) { + info->ignore_status_mask |= MASK_BREAK; + /* If ignoring parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(info->tty)) + info->ignore_status_mask |= MASK_OVERRUN; + } + + program_hw(info); +} + +static int get_stats(struct slgt_info *info, struct mgsl_icount __user *user_icount) +{ + DBGINFO(("%s get_stats\n", info->device_name)); + if (!user_icount) { + memset(&info->icount, 0, sizeof(info->icount)); + } else { + if (copy_to_user(user_icount, &info->icount, sizeof(struct mgsl_icount))) + return -EFAULT; + } + return 0; +} + +static int get_params(struct slgt_info *info, MGSL_PARAMS __user *user_params) +{ + DBGINFO(("%s get_params\n", info->device_name)); + if (copy_to_user(user_params, &info->params, sizeof(MGSL_PARAMS))) + return -EFAULT; + return 0; +} + +static int set_params(struct slgt_info *info, MGSL_PARAMS __user *new_params) +{ + unsigned long flags; + MGSL_PARAMS tmp_params; + + DBGINFO(("%s set_params\n", info->device_name)); + if (copy_from_user(&tmp_params, new_params, sizeof(MGSL_PARAMS))) + return -EFAULT; + + spin_lock_irqsave(&info->lock, flags); + memcpy(&info->params, &tmp_params, sizeof(MGSL_PARAMS)); + spin_unlock_irqrestore(&info->lock, flags); + + change_params(info); + + return 0; +} + +static int get_txidle(struct slgt_info *info, int __user *idle_mode) +{ + DBGINFO(("%s get_txidle=%d\n", info->device_name, info->idle_mode)); + if (put_user(info->idle_mode, idle_mode)) + return -EFAULT; + return 0; +} + +static int set_txidle(struct slgt_info *info, int idle_mode) +{ + unsigned long flags; + DBGINFO(("%s set_txidle(%d)\n", info->device_name, idle_mode)); + spin_lock_irqsave(&info->lock,flags); + info->idle_mode = idle_mode; + tx_set_idle(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int tx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + DBGINFO(("%s tx_enable(%d)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + if (enable) { + if (!info->tx_enabled) + tx_start(info); + } else { + if (info->tx_enabled) + tx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * abort transmit HDLC frame + */ +static int tx_abort(struct slgt_info *info) +{ + unsigned long flags; + DBGINFO(("%s tx_abort\n", info->device_name)); + spin_lock_irqsave(&info->lock,flags); + tdma_reset(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int rx_enable(struct slgt_info *info, int enable) +{ + unsigned long flags; + DBGINFO(("%s rx_enable(%d)\n", info->device_name, enable)); + spin_lock_irqsave(&info->lock,flags); + if (enable) { + if (!info->rx_enabled) + rx_start(info); + } else { + if (info->rx_enabled) + rx_stop(info); + } + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * wait for specified event to occur + */ +static int wait_mgsl_event(struct slgt_info *info, int __user *mask_ptr) +{ + unsigned long flags; + int s; + int rc=0; + struct mgsl_icount cprev, cnow; + int events; + int mask; + struct _input_signal_events oldsigs, newsigs; + DECLARE_WAITQUEUE(wait, current); + + if (get_user(mask, mask_ptr)) + return -EFAULT; + + DBGINFO(("%s wait_mgsl_event(%d)\n", info->device_name, mask)); + + spin_lock_irqsave(&info->lock,flags); + + /* return immediately if state matches requested events */ + get_signals(info); + s = info->signals; + + events = mask & + ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) + + ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) + + ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) + + ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) ); + if (events) { + spin_unlock_irqrestore(&info->lock,flags); + goto exit; + } + + /* save current irq counts */ + cprev = info->icount; + oldsigs = info->input_signal_events; + + /* enable hunt and idle irqs if needed */ + if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) { + unsigned short val = rd_reg16(info, SCR); + if (!(val & IRQ_RXIDLE)) + wr_reg16(info, SCR, (unsigned short)(val | IRQ_RXIDLE)); + } + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&info->event_wait_q, &wait); + + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + newsigs = info->input_signal_events; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (newsigs.dsr_up == oldsigs.dsr_up && + newsigs.dsr_down == oldsigs.dsr_down && + newsigs.dcd_up == oldsigs.dcd_up && + newsigs.dcd_down == oldsigs.dcd_down && + newsigs.cts_up == oldsigs.cts_up && + newsigs.cts_down == oldsigs.cts_down && + newsigs.ri_up == oldsigs.ri_up && + newsigs.ri_down == oldsigs.ri_down && + cnow.exithunt == cprev.exithunt && + cnow.rxidle == cprev.rxidle) { + rc = -EIO; + break; + } + + events = mask & + ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) + + (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) + + (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) + + (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) + + (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) + + (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) + + (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) + + (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) + + (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) + + (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) ); + if (events) + break; + + cprev = cnow; + oldsigs = newsigs; + } + + remove_wait_queue(&info->event_wait_q, &wait); + set_current_state(TASK_RUNNING); + + + if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) { + spin_lock_irqsave(&info->lock,flags); + if (!waitqueue_active(&info->event_wait_q)) { + /* disable enable exit hunt mode/idle rcvd IRQs */ + wr_reg16(info, SCR, + (unsigned short)(rd_reg16(info, SCR) & ~IRQ_RXIDLE)); + } + spin_unlock_irqrestore(&info->lock,flags); + } +exit: + if (rc == 0) + rc = put_user(events, mask_ptr); + return rc; +} + +static int get_interface(struct slgt_info *info, int __user *if_mode) +{ + DBGINFO(("%s get_interface=%x\n", info->device_name, info->if_mode)); + if (put_user(info->if_mode, if_mode)) + return -EFAULT; + return 0; +} + +static int set_interface(struct slgt_info *info, int if_mode) +{ + unsigned long flags; + unsigned char val; + + DBGINFO(("%s set_interface=%x)\n", info->device_name, if_mode)); + spin_lock_irqsave(&info->lock,flags); + info->if_mode = if_mode; + + msc_set_vcr(info); + + /* TCR (tx control) 07 1=RTS driver control */ + val = rd_reg16(info, TCR); + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + else + val &= ~BIT7; + wr_reg16(info, TCR, val); + + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +static int modem_input_wait(struct slgt_info *info,int arg) +{ + unsigned long flags; + int rc; + struct mgsl_icount cprev, cnow; + DECLARE_WAITQUEUE(wait, current); + + /* save current irq counts */ + spin_lock_irqsave(&info->lock,flags); + cprev = info->icount; + add_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + for(;;) { + schedule(); + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + + /* get new irq counts */ + spin_lock_irqsave(&info->lock,flags); + cnow = info->icount; + set_current_state(TASK_INTERRUPTIBLE); + spin_unlock_irqrestore(&info->lock,flags); + + /* if no change, wait aborted for some reason */ + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; + break; + } + + /* check for change in caller specified modem input */ + if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) || + (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) || + (arg & TIOCM_CD && cnow.dcd != cprev.dcd) || + (arg & TIOCM_CTS && cnow.cts != cprev.cts)) { + rc = 0; + break; + } + + cprev = cnow; + } + remove_wait_queue(&info->status_event_wait_q, &wait); + set_current_state(TASK_RUNNING); + return rc; +} + +/* + * return state of serial control and status signals + */ +static int tiocmget(struct tty_struct *tty, struct file *file) +{ + struct slgt_info *info = tty->driver_data; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + result = ((info->signals & SerialSignal_RTS) ? TIOCM_RTS:0) + + ((info->signals & SerialSignal_DTR) ? TIOCM_DTR:0) + + ((info->signals & SerialSignal_DCD) ? TIOCM_CAR:0) + + ((info->signals & SerialSignal_RI) ? TIOCM_RNG:0) + + ((info->signals & SerialSignal_DSR) ? TIOCM_DSR:0) + + ((info->signals & SerialSignal_CTS) ? TIOCM_CTS:0); + + DBGINFO(("%s tiocmget value=%08X\n", info->device_name, result)); + return result; +} + +/* + * set modem control signals (DTR/RTS) + * + * cmd signal command: TIOCMBIS = set bit TIOCMBIC = clear bit + * TIOCMSET = set/clear signal values + * value bit mask for command + */ +static int tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct slgt_info *info = tty->driver_data; + unsigned long flags; + + DBGINFO(("%s tiocmset(%x,%x)\n", info->device_name, set, clear)); + + if (set & TIOCM_RTS) + info->signals |= SerialSignal_RTS; + if (set & TIOCM_DTR) + info->signals |= SerialSignal_DTR; + if (clear & TIOCM_RTS) + info->signals &= ~SerialSignal_RTS; + if (clear & TIOCM_DTR) + info->signals &= ~SerialSignal_DTR; + + spin_lock_irqsave(&info->lock,flags); + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + return 0; +} + +/* + * block current process until the device is ready to open + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct slgt_info *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0, extra_count = 0; + unsigned long flags; + + DBGINFO(("%s block_til_ready\n", tty->driver->name)); + + if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){ + /* nonblock mode is set or port is not enabled */ + info->flags |= ASYNC_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* Wait for carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + spin_lock_irqsave(&info->lock, flags); + if (!tty_hung_up_p(filp)) { + extra_count = 1; + info->count--; + } + spin_unlock_irqrestore(&info->lock, flags); + info->blocked_open++; + + while (1) { + if ((tty->termios->c_cflag & CBAUD)) { + spin_lock_irqsave(&info->lock,flags); + info->signals |= SerialSignal_RTS + SerialSignal_DTR; + set_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + } + + set_current_state(TASK_INTERRUPTIBLE); + + if (tty_hung_up_p(filp) || !(info->flags & ASYNC_INITIALIZED)){ + retval = (info->flags & ASYNC_HUP_NOTIFY) ? + -EAGAIN : -ERESTARTSYS; + break; + } + + spin_lock_irqsave(&info->lock,flags); + get_signals(info); + spin_unlock_irqrestore(&info->lock,flags); + + if (!(info->flags & ASYNC_CLOSING) && + (do_clocal || (info->signals & SerialSignal_DCD)) ) { + break; + } + + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + + DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); + schedule(); + } + + set_current_state(TASK_RUNNING); + remove_wait_queue(&info->open_wait, &wait); + + if (extra_count) + info->count++; + info->blocked_open--; + + if (!retval) + info->flags |= ASYNC_NORMAL_ACTIVE; + + DBGINFO(("%s block_til_ready ready, rc=%d\n", tty->driver->name, retval)); + return retval; +} + +static int alloc_tmp_rbuf(struct slgt_info *info) +{ + info->tmp_rbuf = kmalloc(info->max_frame_size, GFP_KERNEL); + if (info->tmp_rbuf == NULL) + return -ENOMEM; + return 0; +} + +static void free_tmp_rbuf(struct slgt_info *info) +{ + kfree(info->tmp_rbuf); + info->tmp_rbuf = NULL; +} + +/* + * allocate DMA descriptor lists. + */ +static int alloc_desc(struct slgt_info *info) +{ + unsigned int i; + unsigned int pbufs; + + /* allocate memory to hold descriptor lists */ + info->bufs = pci_alloc_consistent(info->pdev, DESC_LIST_SIZE, &info->bufs_dma_addr); + if (info->bufs == NULL) + return -ENOMEM; + + memset(info->bufs, 0, DESC_LIST_SIZE); + + info->rbufs = (struct slgt_desc*)info->bufs; + info->tbufs = ((struct slgt_desc*)info->bufs) + info->rbuf_count; + + pbufs = (unsigned int)info->bufs_dma_addr; + + /* + * Build circular lists of descriptors + */ + + for (i=0; i < info->rbuf_count; i++) { + /* physical address of this descriptor */ + info->rbufs[i].pdesc = pbufs + (i * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->rbuf_count - 1) + info->rbufs[i].next = cpu_to_le32(pbufs); + else + info->rbufs[i].next = cpu_to_le32(pbufs + ((i+1) * sizeof(struct slgt_desc))); + set_desc_count(info->rbufs[i], DMABUFSIZE); + } + + for (i=0; i < info->tbuf_count; i++) { + /* physical address of this descriptor */ + info->tbufs[i].pdesc = pbufs + ((info->rbuf_count + i) * sizeof(struct slgt_desc)); + + /* physical address of next descriptor */ + if (i == info->tbuf_count - 1) + info->tbufs[i].next = cpu_to_le32(pbufs + info->rbuf_count * sizeof(struct slgt_desc)); + else + info->tbufs[i].next = cpu_to_le32(pbufs + ((info->rbuf_count + i + 1) * sizeof(struct slgt_desc))); + } + + return 0; +} + +static void free_desc(struct slgt_info *info) +{ + if (info->bufs != NULL) { + pci_free_consistent(info->pdev, DESC_LIST_SIZE, info->bufs, info->bufs_dma_addr); + info->bufs = NULL; + info->rbufs = NULL; + info->tbufs = NULL; + } +} + +static int alloc_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + if ((bufs[i].buf = pci_alloc_consistent(info->pdev, DMABUFSIZE, &bufs[i].buf_dma_addr)) == NULL) + return -ENOMEM; + bufs[i].pbuf = cpu_to_le32((unsigned int)bufs[i].buf_dma_addr); + } + return 0; +} + +static void free_bufs(struct slgt_info *info, struct slgt_desc *bufs, int count) +{ + int i; + for (i=0; i < count; i++) { + if (bufs[i].buf == NULL) + continue; + pci_free_consistent(info->pdev, DMABUFSIZE, bufs[i].buf, bufs[i].buf_dma_addr); + bufs[i].buf = NULL; + } +} + +static int alloc_dma_bufs(struct slgt_info *info) +{ + info->rbuf_count = 32; + info->tbuf_count = 32; + + if (alloc_desc(info) < 0 || + alloc_bufs(info, info->rbufs, info->rbuf_count) < 0 || + alloc_bufs(info, info->tbufs, info->tbuf_count) < 0 || + alloc_tmp_rbuf(info) < 0) { + DBGERR(("%s DMA buffer alloc fail\n", info->device_name)); + return -ENOMEM; + } + reset_rbufs(info); + return 0; +} + +static void free_dma_bufs(struct slgt_info *info) +{ + if (info->bufs) { + free_bufs(info, info->rbufs, info->rbuf_count); + free_bufs(info, info->tbufs, info->tbuf_count); + free_desc(info); + } + free_tmp_rbuf(info); +} + +static int claim_resources(struct slgt_info *info) +{ + if (request_mem_region(info->phys_reg_addr, SLGT_REG_SIZE, "synclink_gt") == NULL) { + DBGERR(("%s reg addr conflict, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_AddressConflict; + goto errout; + } + else + info->reg_addr_requested = 1; + + info->reg_addr = ioremap(info->phys_reg_addr, PAGE_SIZE); + if (!info->reg_addr) { + DBGERR(("%s cant map device registers, addr=%08X\n", + info->device_name, info->phys_reg_addr)); + info->init_error = DiagStatus_CantAssignPciResources; + goto errout; + } + info->reg_addr += info->reg_offset; + return 0; + +errout: + release_resources(info); + return -ENODEV; +} + +static void release_resources(struct slgt_info *info) +{ + if (info->irq_requested) { + free_irq(info->irq_level, info); + info->irq_requested = 0; + } + + if (info->reg_addr_requested) { + release_mem_region(info->phys_reg_addr, SLGT_REG_SIZE); + info->reg_addr_requested = 0; + } + + if (info->reg_addr) { + iounmap(info->reg_addr - info->reg_offset); + info->reg_addr = NULL; + } +} + +/* Add the specified device instance data structure to the + * global linked list of devices and increment the device count. + */ +static void add_device(struct slgt_info *info) +{ + char *devstr; + + info->next_device = NULL; + info->line = slgt_device_count; + sprintf(info->device_name, "%s%d", tty_dev_prefix, info->line); + + if (info->line < MAX_DEVICES) { + if (maxframe[info->line]) + info->max_frame_size = maxframe[info->line]; + info->dosyncppp = dosyncppp[info->line]; + } + + slgt_device_count++; + + if (!slgt_device_list) + slgt_device_list = info; + else { + struct slgt_info *current_dev = slgt_device_list; + while(current_dev->next_device) + current_dev = current_dev->next_device; + current_dev->next_device = info; + } + + if (info->max_frame_size < 4096) + info->max_frame_size = 4096; + else if (info->max_frame_size > 65535) + info->max_frame_size = 65535; + + switch(info->pdev->device) { + case SYNCLINK_GT_DEVICE_ID: + devstr = "GT"; + break; + case SYNCLINK_GT4_DEVICE_ID: + devstr = "GT4"; + break; + case SYNCLINK_AC_DEVICE_ID: + devstr = "AC"; + info->params.mode = MGSL_MODE_ASYNC; + break; + default: + devstr = "(unknown model)"; + } + printk("SyncLink %s %s IO=%08x IRQ=%d MaxFrameSize=%u\n", + devstr, info->device_name, info->phys_reg_addr, + info->irq_level, info->max_frame_size); + +#ifdef CONFIG_HDLC + hdlcdev_init(info); +#endif +} + +/* + * allocate device instance structure, return NULL on failure + */ +static struct slgt_info *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev) +{ + struct slgt_info *info; + + info = kmalloc(sizeof(struct slgt_info), GFP_KERNEL); + + if (!info) { + DBGERR(("%s device alloc failed adapter=%d port=%d\n", + driver_name, adapter_num, port_num)); + } else { + memset(info, 0, sizeof(struct slgt_info)); + info->magic = MGSL_MAGIC; + INIT_WORK(&info->task, bh_handler, info); + info->max_frame_size = 4096; + info->raw_rx_size = DMABUFSIZE; + info->close_delay = 5*HZ/10; + info->closing_wait = 30*HZ; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + init_waitqueue_head(&info->status_event_wait_q); + init_waitqueue_head(&info->event_wait_q); + spin_lock_init(&info->netlock); + memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS)); + info->idle_mode = HDLC_TXIDLE_FLAGS; + info->adapter_num = adapter_num; + info->port_num = port_num; + + init_timer(&info->tx_timer); + info->tx_timer.data = (unsigned long)info; + info->tx_timer.function = tx_timeout; + + init_timer(&info->rx_timer); + info->rx_timer.data = (unsigned long)info; + info->rx_timer.function = rx_timeout; + + /* Copy configuration info to device instance data */ + info->pdev = pdev; + info->irq_level = pdev->irq; + info->phys_reg_addr = pci_resource_start(pdev,0); + + /* veremap works on page boundaries + * map full page starting at the page boundary + */ + info->reg_offset = info->phys_reg_addr & (PAGE_SIZE-1); + info->phys_reg_addr &= ~(PAGE_SIZE-1); + + info->bus_type = MGSL_BUS_TYPE_PCI; + info->irq_flags = SA_SHIRQ; + + info->init_error = -1; /* assume error, set to 0 on successful init */ + } + + return info; +} + +static void device_init(int adapter_num, struct pci_dev *pdev) +{ + struct slgt_info *port_array[SLGT_MAX_PORTS]; + int i; + int port_count = 1; + + if (pdev->device == SYNCLINK_GT4_DEVICE_ID) + port_count = 4; + + /* allocate device instances for all ports */ + for (i=0; i < port_count; ++i) { + port_array[i] = alloc_dev(adapter_num, i, pdev); + if (port_array[i] == NULL) { + for (--i; i >= 0; --i) + kfree(port_array[i]); + return; + } + } + + /* give copy of port_array to all ports and add to device list */ + for (i=0; i < port_count; ++i) { + memcpy(port_array[i]->port_array, port_array, sizeof(port_array)); + add_device(port_array[i]); + port_array[i]->port_count = port_count; + spin_lock_init(&port_array[i]->lock); + } + + /* Allocate and claim adapter resources */ + if (!claim_resources(port_array[0])) { + + alloc_dma_bufs(port_array[0]); + + /* copy resource information from first port to others */ + for (i = 1; i < port_count; ++i) { + port_array[i]->lock = port_array[0]->lock; + port_array[i]->irq_level = port_array[0]->irq_level; + port_array[i]->reg_addr = port_array[0]->reg_addr; + alloc_dma_bufs(port_array[i]); + } + + if (request_irq(port_array[0]->irq_level, + slgt_interrupt, + port_array[0]->irq_flags, + port_array[0]->device_name, + port_array[0]) < 0) { + DBGERR(("%s request_irq failed IRQ=%d\n", + port_array[0]->device_name, + port_array[0]->irq_level)); + } else { + port_array[0]->irq_requested = 1; + adapter_test(port_array[0]); + for (i=1 ; i < port_count ; i++) + port_array[i]->init_error = port_array[0]->init_error; + } + } +} + +static int __devinit init_one(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + if (pci_enable_device(dev)) { + printk("error enabling pci device %p\n", dev); + return -EIO; + } + pci_set_master(dev); + device_init(slgt_device_count, dev); + return 0; +} + +static void __devexit remove_one(struct pci_dev *dev) +{ +} + +static struct tty_operations ops = { + .open = open, + .close = close, + .write = write, + .put_char = put_char, + .flush_chars = flush_chars, + .write_room = write_room, + .chars_in_buffer = chars_in_buffer, + .flush_buffer = flush_buffer, + .ioctl = ioctl, + .throttle = throttle, + .unthrottle = unthrottle, + .send_xchar = send_xchar, + .break_ctl = set_break, + .wait_until_sent = wait_until_sent, + .read_proc = read_proc, + .set_termios = set_termios, + .stop = tx_hold, + .start = tx_release, + .hangup = hangup, + .tiocmget = tiocmget, + .tiocmset = tiocmset, +}; + +static void slgt_cleanup(void) +{ + int rc; + struct slgt_info *info; + struct slgt_info *tmp; + + printk("unload %s %s\n", driver_name, driver_version); + + if (serial_driver) { + if ((rc = tty_unregister_driver(serial_driver))) + DBGERR(("tty_unregister_driver error=%d\n", rc)); + put_tty_driver(serial_driver); + } + + /* reset devices */ + info = slgt_device_list; + while(info) { + reset_port(info); + info = info->next_device; + } + + /* release devices */ + info = slgt_device_list; + while(info) { +#ifdef CONFIG_HDLC + hdlcdev_exit(info); +#endif + free_dma_bufs(info); + free_tmp_rbuf(info); + if (info->port_num == 0) + release_resources(info); + tmp = info; + info = info->next_device; + kfree(tmp); + } + + if (pci_registered) + pci_unregister_driver(&pci_driver); +} + +/* + * Driver initialization entry point. + */ +static int __init slgt_init(void) +{ + int rc; + + printk("%s %s\n", driver_name, driver_version); + + slgt_device_count = 0; + if ((rc = pci_register_driver(&pci_driver)) < 0) { + printk("%s pci_register_driver error=%d\n", driver_name, rc); + return rc; + } + pci_registered = 1; + + if (!slgt_device_list) { + printk("%s no devices found\n",driver_name); + return -ENODEV; + } + + serial_driver = alloc_tty_driver(MAX_DEVICES); + if (!serial_driver) { + rc = -ENOMEM; + goto error; + } + + /* Initialize the tty_driver structure */ + + serial_driver->owner = THIS_MODULE; + serial_driver->driver_name = tty_driver_name; + serial_driver->name = tty_dev_prefix; + serial_driver->major = ttymajor; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &ops); + if ((rc = tty_register_driver(serial_driver)) < 0) { + DBGERR(("%s can't register serial driver\n", driver_name)); + put_tty_driver(serial_driver); + serial_driver = NULL; + goto error; + } + + printk("%s %s, tty major#%d\n", + driver_name, driver_version, + serial_driver->major); + + return 0; + +error: + slgt_cleanup(); + return rc; +} + +static void __exit slgt_exit(void) +{ + slgt_cleanup(); +} + +module_init(slgt_init); +module_exit(slgt_exit); + +/* + * register access routines + */ + +#define CALC_REGADDR() \ + unsigned long reg_addr = ((unsigned long)info->reg_addr) + addr; \ + if (addr >= 0x80) \ + reg_addr += (info->port_num) * 32; + +static __u8 rd_reg8(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readb((void __iomem *)reg_addr); +} + +static void wr_reg8(struct slgt_info *info, unsigned int addr, __u8 value) +{ + CALC_REGADDR(); + writeb(value, (void __iomem *)reg_addr); +} + +static __u16 rd_reg16(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readw((void __iomem *)reg_addr); +} + +static void wr_reg16(struct slgt_info *info, unsigned int addr, __u16 value) +{ + CALC_REGADDR(); + writew(value, (void __iomem *)reg_addr); +} + +static __u32 rd_reg32(struct slgt_info *info, unsigned int addr) +{ + CALC_REGADDR(); + return readl((void __iomem *)reg_addr); +} + +static void wr_reg32(struct slgt_info *info, unsigned int addr, __u32 value) +{ + CALC_REGADDR(); + writel(value, (void __iomem *)reg_addr); +} + +static void rdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, RDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, RDCSR) & BIT0)) + break; +} + +static void tdma_reset(struct slgt_info *info) +{ + unsigned int i; + + /* set reset bit */ + wr_reg32(info, TDCSR, BIT1); + + /* wait for enable bit cleared */ + for(i=0 ; i < 1000 ; i++) + if (!(rd_reg32(info, TDCSR) & BIT0)) + break; +} + +/* + * enable internal loopback + * TxCLK and RxCLK are generated from BRG + * and TxD is looped back to RxD internally. + */ +static void enable_loopback(struct slgt_info *info) +{ + /* SCR (serial control) BIT2=looopback enable */ + wr_reg16(info, SCR, (unsigned short)(rd_reg16(info, SCR) | BIT2)); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* CCR (clock control) + * 07..05 tx clock source (010 = BRG) + * 04..02 rx clock source (010 = BRG) + * 01 auxclk enable (0 = disable) + * 00 BRG enable (1 = enable) + * + * 0100 1001 + */ + wr_reg8(info, CCR, 0x49); + + /* set speed if available, otherwise use default */ + if (info->params.clock_speed) + set_rate(info, info->params.clock_speed); + else + set_rate(info, 3686400); + } +} + +/* + * set baud rate generator to specified rate + */ +static void set_rate(struct slgt_info *info, u32 rate) +{ + unsigned int div; + static unsigned int osc = 14745600; + + /* div = osc/rate - 1 + * + * Round div up if osc/rate is not integer to + * force to next slowest rate. + */ + + if (rate) { + div = osc/rate; + if (!(osc % rate) && div) + div--; + wr_reg16(info, BDR, (unsigned short)div); + } +} + +static void rx_stop(struct slgt_info *info) +{ + unsigned short val; + + /* disable and reset receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA + IRQ_RXIDLE); + + /* clear pending rx interrupts */ + wr_reg16(info, SSR, IRQ_RXIDLE + IRQ_RXOVER); + + rdma_reset(info); + + info->rx_enabled = 0; + info->rx_restart = 0; +} + +static void rx_start(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_RXOVER + IRQ_RXDATA); + + /* clear pending rx overrun IRQ */ + wr_reg16(info, SSR, IRQ_RXOVER); + + /* reset and disable receiver */ + val = rd_reg16(info, RCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, RCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, RCR, val); /* clear reset bit */ + + rdma_reset(info); + reset_rbufs(info); + + /* set 1st descriptor address */ + wr_reg32(info, RDDAR, info->rbufs[0].pdesc); + + if (info->params.mode != MGSL_MODE_ASYNC) { + /* enable rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT2 + BIT0)); + } else { + /* enable saving of rx status, rx DMA and DMA interrupt */ + wr_reg32(info, RDCSR, (BIT6 + BIT2 + BIT0)); + } + + slgt_irq_on(info, IRQ_RXOVER); + + /* enable receiver */ + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | BIT1)); + + info->rx_restart = 0; + info->rx_enabled = 1; +} + +static void tx_start(struct slgt_info *info) +{ + if (!info->tx_enabled) { + wr_reg16(info, TCR, + (unsigned short)(rd_reg16(info, TCR) | BIT1)); + info->tx_enabled = TRUE; + } + + if (info->tx_count) { + info->drop_rts_on_tx_done = 0; + + if (info->params.mode != MGSL_MODE_ASYNC) { + if (info->params.flags & HDLC_FLAG_AUTO_RTS) { + get_signals(info); + if (!(info->signals & SerialSignal_RTS)) { + info->signals |= SerialSignal_RTS; + set_signals(info); + info->drop_rts_on_tx_done = 1; + } + } + + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXUNDER + IRQ_TXIDLE); + /* clear tx idle and underrun status bits */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + + if (!(rd_reg32(info, TDCSR) & BIT0)) { + /* tx DMA stopped, restart tx DMA */ + tdma_reset(info); + /* set 1st descriptor address */ + wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); + if (info->params.mode == MGSL_MODE_RAW) + wr_reg32(info, TDCSR, BIT2 + BIT0); /* IRQ + DMA enable */ + else + wr_reg32(info, TDCSR, BIT0); /* DMA enable */ + } + + if (info->params.mode != MGSL_MODE_RAW) { + info->tx_timer.expires = jiffies + msecs_to_jiffies(5000); + add_timer(&info->tx_timer); + } + } else { + tdma_reset(info); + /* set 1st descriptor address */ + wr_reg32(info, TDDAR, info->tbufs[info->tbuf_start].pdesc); + + slgt_irq_off(info, IRQ_TXDATA); + slgt_irq_on(info, IRQ_TXIDLE); + /* clear tx idle status bit */ + wr_reg16(info, SSR, IRQ_TXIDLE); + + /* enable tx DMA */ + wr_reg32(info, TDCSR, BIT0); + } + + info->tx_active = 1; + } +} + +static void tx_stop(struct slgt_info *info) +{ + unsigned short val; + + del_timer(&info->tx_timer); + + tdma_reset(info); + + /* reset and disable transmitter */ + val = rd_reg16(info, TCR) & ~BIT1; /* clear enable bit */ + wr_reg16(info, TCR, (unsigned short)(val | BIT2)); /* set reset bit */ + wr_reg16(info, TCR, val); /* clear reset */ + + slgt_irq_off(info, IRQ_TXDATA + IRQ_TXIDLE + IRQ_TXUNDER); + + /* clear tx idle and underrun status bit */ + wr_reg16(info, SSR, (unsigned short)(IRQ_TXIDLE + IRQ_TXUNDER)); + + reset_tbufs(info); + + info->tx_enabled = 0; + info->tx_active = 0; +} + +static void reset_port(struct slgt_info *info) +{ + if (!info->reg_addr) + return; + + tx_stop(info); + rx_stop(info); + + info->signals &= ~(SerialSignal_DTR + SerialSignal_RTS); + set_signals(info); + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); +} + +static void reset_adapter(struct slgt_info *info) +{ + int i; + for (i=0; i < info->port_count; ++i) { + if (info->port_array[i]) + reset_port(info->port_array[i]); + } +} + +static void async_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07 1=RTS driver control + * 06 1=break enable + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 0=1 stop bit, 1=2 stop bits + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = 0x4000; + + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.stop_bits != 1) + val |= BIT3; + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* RCR (rx control) + * + * 15..13 mode, 010=async + * 12..10 encoding, 000=NRZ + * 09 parity enable + * 08 1=odd parity, 0=even parity + * 07..06 reserved, must be 0 + * 05..04 character length + * 00=5 bits + * 01=6 bits + * 10=7 bits + * 11=8 bits + * 03 reserved, must be zero + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0x4000; + + if (info->params.parity != ASYNC_PARITY_NONE) { + val |= BIT9; + if (info->params.parity == ASYNC_PARITY_ODD) + val |= BIT8; + } + + switch (info->params.data_bits) + { + case 6: val |= BIT4; break; + case 7: val |= BIT5; break; + case 8: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 011 = tx clock source is BRG/16 + * 04..02 010 = rx clock source is BRG + * 01 0 = auxclk disabled + * 00 1 = BRG enabled + * + * 0110 1001 + */ + wr_reg8(info, CCR, 0x69); + + msc_set_vcr(info); + + tx_set_idle(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 rx break on IRQ enable + * 10 rx data IRQ enable + * 09 rx break off IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 reserved, must be zero + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + val = BIT15 + BIT14 + BIT0; + wr_reg16(info, SCR, val); + + slgt_irq_on(info, IRQ_RXBREAK | IRQ_RXOVER); + + set_rate(info, info->params.data_rate * 16); + + if (info->params.loopback) + enable_loopback(info); +} + +static void hdlc_mode(struct slgt_info *info) +{ + unsigned short val; + + slgt_irq_off(info, IRQ_ALL | IRQ_MASTER); + tx_stop(info); + rx_stop(info); + + /* TCR (tx control) + * + * 15..13 mode, 000=HDLC 001=raw sync + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07 1=RTS driver control + * 06 preamble enable + * 05..04 preamble length + * 03 share open/close flag + * 02 reset + * 01 enable + * 00 auto-CTS enable + */ + val = 0; + + if (info->params.mode == MGSL_MODE_RAW) + val |= BIT13; + if (info->if_mode & MGSL_INTERFACE_RTS_EN) + val |= BIT7; + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE) + val |= BIT6; + + switch (info->params.preamble_length) + { + case HDLC_PREAMBLE_LENGTH_16BITS: val |= BIT5; break; + case HDLC_PREAMBLE_LENGTH_32BITS: val |= BIT4; break; + case HDLC_PREAMBLE_LENGTH_64BITS: val |= BIT5 + BIT4; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_CTS) + val |= BIT0; + + wr_reg16(info, TCR, val); + + /* TPR (transmit preamble) */ + + switch (info->params.preamble) + { + case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break; + case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break; + case HDLC_PREAMBLE_PATTERN_ZEROS: val = 0x00; break; + case HDLC_PREAMBLE_PATTERN_10: val = 0x55; break; + case HDLC_PREAMBLE_PATTERN_01: val = 0xaa; break; + default: val = 0x7e; break; + } + wr_reg8(info, TPR, (unsigned char)val); + + /* RCR (rx control) + * + * 15..13 mode, 000=HDLC 001=raw sync + * 12..10 encoding + * 09 CRC enable + * 08 CRC32 + * 07..03 reserved, must be 0 + * 02 reset + * 01 enable + * 00 auto-DCD enable + */ + val = 0; + + if (info->params.mode == MGSL_MODE_RAW) + val |= BIT13; + + switch(info->params.encoding) + { + case HDLC_ENCODING_NRZB: val |= BIT10; break; + case HDLC_ENCODING_NRZI_MARK: val |= BIT11; break; + case HDLC_ENCODING_NRZI: val |= BIT11 + BIT10; break; + case HDLC_ENCODING_BIPHASE_MARK: val |= BIT12; break; + case HDLC_ENCODING_BIPHASE_SPACE: val |= BIT12 + BIT10; break; + case HDLC_ENCODING_BIPHASE_LEVEL: val |= BIT12 + BIT11; break; + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: val |= BIT12 + BIT11 + BIT10; break; + } + + switch (info->params.crc_type) + { + case HDLC_CRC_16_CCITT: val |= BIT9; break; + case HDLC_CRC_32_CCITT: val |= BIT9 + BIT8; break; + } + + if (info->params.flags & HDLC_FLAG_AUTO_DCD) + val |= BIT0; + + wr_reg16(info, RCR, val); + + /* CCR (clock control) + * + * 07..05 tx clock source + * 04..02 rx clock source + * 01 auxclk enable + * 00 BRG enable + */ + val = 0; + + if (info->params.flags & HDLC_FLAG_TXC_BRG) + { + // when RxC source is DPLL, BRG generates 16X DPLL + // reference clock, so take TxC from BRG/16 to get + // transmit clock at actual data rate + if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT6 + BIT5; /* 011, txclk = BRG/16 */ + else + val |= BIT6; /* 010, txclk = BRG */ + } + else if (info->params.flags & HDLC_FLAG_TXC_DPLL) + val |= BIT7; /* 100, txclk = DPLL Input */ + else if (info->params.flags & HDLC_FLAG_TXC_RXCPIN) + val |= BIT5; /* 001, txclk = RXC Input */ + + if (info->params.flags & HDLC_FLAG_RXC_BRG) + val |= BIT3; /* 010, rxclk = BRG */ + else if (info->params.flags & HDLC_FLAG_RXC_DPLL) + val |= BIT4; /* 100, rxclk = DPLL */ + else if (info->params.flags & HDLC_FLAG_RXC_TXCPIN) + val |= BIT2; /* 001, rxclk = TXC Input */ + + if (info->params.clock_speed) + val |= BIT1 + BIT0; + + wr_reg8(info, CCR, (unsigned char)val); + + if (info->params.flags & (HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL)) + { + // program DPLL mode + switch(info->params.encoding) + { + case HDLC_ENCODING_BIPHASE_MARK: + case HDLC_ENCODING_BIPHASE_SPACE: + val = BIT7; break; + case HDLC_ENCODING_BIPHASE_LEVEL: + case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: + val = BIT7 + BIT6; break; + default: val = BIT6; // NRZ encodings + } + wr_reg16(info, RCR, (unsigned short)(rd_reg16(info, RCR) | val)); + + // DPLL requires a 16X reference clock from BRG + set_rate(info, info->params.clock_speed * 16); + } + else + set_rate(info, info->params.clock_speed); + + tx_set_idle(info); + + msc_set_vcr(info); + + /* SCR (serial control) + * + * 15 1=tx req on FIFO half empty + * 14 1=rx req on FIFO half full + * 13 tx data IRQ enable + * 12 tx idle IRQ enable + * 11 underrun IRQ enable + * 10 rx data IRQ enable + * 09 rx idle IRQ enable + * 08 overrun IRQ enable + * 07 DSR IRQ enable + * 06 CTS IRQ enable + * 05 DCD IRQ enable + * 04 RI IRQ enable + * 03 reserved, must be zero + * 02 1=txd->rxd internal loopback enable + * 01 reserved, must be zero + * 00 1=master IRQ enable + */ + wr_reg16(info, SCR, BIT15 + BIT14 + BIT0); + + if (info->params.loopback) + enable_loopback(info); +} + +/* + * set transmit idle mode + */ +static void tx_set_idle(struct slgt_info *info) +{ + unsigned char val = 0xff; + + switch(info->idle_mode) + { + case HDLC_TXIDLE_FLAGS: val = 0x7e; break; + case HDLC_TXIDLE_ALT_ZEROS_ONES: val = 0xaa; break; + case HDLC_TXIDLE_ZEROS: val = 0x00; break; + case HDLC_TXIDLE_ONES: val = 0xff; break; + case HDLC_TXIDLE_ALT_MARK_SPACE: val = 0xaa; break; + case HDLC_TXIDLE_SPACE: val = 0x00; break; + case HDLC_TXIDLE_MARK: val = 0xff; break; + } + + wr_reg8(info, TIR, val); +} + +/* + * get state of V24 status (input) signals + */ +static void get_signals(struct slgt_info *info) +{ + unsigned short status = rd_reg16(info, SSR); + + /* clear all serial signals except DTR and RTS */ + info->signals &= SerialSignal_DTR + SerialSignal_RTS; + + if (status & BIT3) + info->signals |= SerialSignal_DSR; + if (status & BIT2) + info->signals |= SerialSignal_CTS; + if (status & BIT1) + info->signals |= SerialSignal_DCD; + if (status & BIT0) + info->signals |= SerialSignal_RI; +} + +/* + * set V.24 Control Register based on current configuration + */ +static void msc_set_vcr(struct slgt_info *info) +{ + unsigned char val = 0; + + /* VCR (V.24 control) + * + * 07..04 serial IF select + * 03 DTR + * 02 RTS + * 01 LL + * 00 RL + */ + + switch(info->if_mode & MGSL_INTERFACE_MASK) + { + case MGSL_INTERFACE_RS232: + val |= BIT5; /* 0010 */ + break; + case MGSL_INTERFACE_V35: + val |= BIT7 + BIT6 + BIT5; /* 1110 */ + break; + case MGSL_INTERFACE_RS422: + val |= BIT6; /* 0100 */ + break; + } + + if (info->signals & SerialSignal_DTR) + val |= BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + if (info->if_mode & MGSL_INTERFACE_LL) + val |= BIT1; + if (info->if_mode & MGSL_INTERFACE_RL) + val |= BIT0; + wr_reg8(info, VCR, val); +} + +/* + * set state of V24 control (output) signals + */ +static void set_signals(struct slgt_info *info) +{ + unsigned char val = rd_reg8(info, VCR); + if (info->signals & SerialSignal_DTR) + val |= BIT3; + else + val &= ~BIT3; + if (info->signals & SerialSignal_RTS) + val |= BIT2; + else + val &= ~BIT2; + wr_reg8(info, VCR, val); +} + +/* + * free range of receive DMA buffers (i to last) + */ +static void free_rbufs(struct slgt_info *info, unsigned int i, unsigned int last) +{ + int done = 0; + + while(!done) { + /* reset current buffer for reuse */ + info->rbufs[i].status = 0; + if (info->params.mode == MGSL_MODE_RAW) + set_desc_count(info->rbufs[i], info->raw_rx_size); + else + set_desc_count(info->rbufs[i], DMABUFSIZE); + + if (i == last) + done = 1; + if (++i == info->rbuf_count) + i = 0; + } + info->rbuf_current = i; +} + +/* + * mark all receive DMA buffers as free + */ +static void reset_rbufs(struct slgt_info *info) +{ + free_rbufs(info, 0, info->rbuf_count - 1); +} + +/* + * pass receive HDLC frame to upper layer + * + * return 1 if frame available, otherwise 0 + */ +static int rx_get_frame(struct slgt_info *info) +{ + unsigned int start, end; + unsigned short status; + unsigned int framesize = 0; + int rc = 0; + unsigned long flags; + struct tty_struct *tty = info->tty; + unsigned char addr_field = 0xff; + +check_again: + + framesize = 0; + addr_field = 0xff; + start = end = info->rbuf_current; + + for (;;) { + if (!desc_complete(info->rbufs[end])) + goto cleanup; + + if (framesize == 0 && info->params.addr_filter != 0xff) + addr_field = info->rbufs[end].buf[0]; + + framesize += desc_count(info->rbufs[end]); + + if (desc_eof(info->rbufs[end])) + break; + + if (++end == info->rbuf_count) + end = 0; + + if (end == info->rbuf_current) { + if (info->rx_enabled){ + spin_lock_irqsave(&info->lock,flags); + rx_start(info); + spin_unlock_irqrestore(&info->lock,flags); + } + goto cleanup; + } + } + + /* status + * + * 15 buffer complete + * 14..06 reserved + * 05..04 residue + * 02 eof (end of frame) + * 01 CRC error + * 00 abort + */ + status = desc_status(info->rbufs[end]); + + /* ignore CRC bit if not using CRC (bit is undefined) */ + if (info->params.crc_type == HDLC_CRC_NONE) + status &= ~BIT1; + + if (framesize == 0 || + (addr_field != 0xff && addr_field != info->params.addr_filter)) { + free_rbufs(info, start, end); + goto check_again; + } + + if (framesize < 2 || status & (BIT1+BIT0)) { + if (framesize < 2 || (status & BIT0)) + info->icount.rxshort++; + else + info->icount.rxcrc++; + framesize = 0; + +#ifdef CONFIG_HDLC + { + struct net_device_stats *stats = hdlc_stats(info->netdev); + stats->rx_errors++; + stats->rx_frame_errors++; + } +#endif + } else { + /* adjust frame size for CRC, if any */ + if (info->params.crc_type == HDLC_CRC_16_CCITT) + framesize -= 2; + else if (info->params.crc_type == HDLC_CRC_32_CCITT) + framesize -= 4; + } + + DBGBH(("%s rx frame status=%04X size=%d\n", + info->device_name, status, framesize)); + DBGDATA(info, info->rbufs[start].buf, min_t(int, framesize, DMABUFSIZE), "rx"); + + if (framesize) { + if (framesize > info->max_frame_size) + info->icount.rxlong++; + else { + /* copy dma buffer(s) to contiguous temp buffer */ + int copy_count = framesize; + int i = start; + unsigned char *p = info->tmp_rbuf; + info->tmp_rbuf_count = framesize; + + info->icount.rxok++; + + while(copy_count) { + int partial_count = min(copy_count, DMABUFSIZE); + memcpy(p, info->rbufs[i].buf, partial_count); + p += partial_count; + copy_count -= partial_count; + if (++i == info->rbuf_count) + i = 0; + } + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_rx(info,info->tmp_rbuf, framesize); + else +#endif + ldisc_receive_buf(tty, info->tmp_rbuf, info->flag_buf, framesize); + } + } + free_rbufs(info, start, end); + rc = 1; + +cleanup: + return rc; +} + +/* + * pass receive buffer (RAW synchronous mode) to tty layer + * return 1 if buffer available, otherwise 0 + */ +static int rx_get_buf(struct slgt_info *info) +{ + unsigned int i = info->rbuf_current; + + if (!desc_complete(info->rbufs[i])) + return 0; + DBGDATA(info, info->rbufs[i].buf, desc_count(info->rbufs[i]), "rx"); + DBGINFO(("rx_get_buf size=%d\n", desc_count(info->rbufs[i]))); + ldisc_receive_buf(info->tty, info->rbufs[i].buf, + info->flag_buf, desc_count(info->rbufs[i])); + free_rbufs(info, i, i); + return 1; +} + +static void reset_tbufs(struct slgt_info *info) +{ + unsigned int i; + info->tbuf_current = 0; + for (i=0 ; i < info->tbuf_count ; i++) { + info->tbufs[i].status = 0; + info->tbufs[i].count = 0; + } +} + +/* + * return number of free transmit DMA buffers + */ +static unsigned int free_tbuf_count(struct slgt_info *info) +{ + unsigned int count = 0; + unsigned int i = info->tbuf_current; + + do + { + if (desc_count(info->tbufs[i])) + break; /* buffer in use */ + ++count; + if (++i == info->tbuf_count) + i=0; + } while (i != info->tbuf_current); + + /* last buffer with zero count may be in use, assume it is */ + if (count) + --count; + + return count; +} + +/* + * load transmit DMA buffer(s) with data + */ +static void tx_load(struct slgt_info *info, const char *buf, unsigned int size) +{ + unsigned short count; + unsigned int i; + struct slgt_desc *d; + + if (size == 0) + return; + + DBGDATA(info, buf, size, "tx"); + + info->tbuf_start = i = info->tbuf_current; + + while (size) { + d = &info->tbufs[i]; + if (++i == info->tbuf_count) + i = 0; + + count = (unsigned short)((size > DMABUFSIZE) ? DMABUFSIZE : size); + memcpy(d->buf, buf, count); + + size -= count; + buf += count; + + if (!size && info->params.mode != MGSL_MODE_RAW) + set_desc_eof(*d, 1); /* HDLC: set EOF of last desc */ + else + set_desc_eof(*d, 0); + + set_desc_count(*d, count); + } + + info->tbuf_current = i; +} + +static int register_test(struct slgt_info *info) +{ + static unsigned short patterns[] = + {0x0000, 0xffff, 0xaaaa, 0x5555, 0x6969, 0x9696}; + static unsigned int count = sizeof(patterns)/sizeof(patterns[0]); + unsigned int i; + int rc = 0; + + for (i=0 ; i < count ; i++) { + wr_reg16(info, TIR, patterns[i]); + wr_reg16(info, BDR, patterns[(i+1)%count]); + if ((rd_reg16(info, TIR) != patterns[i]) || + (rd_reg16(info, BDR) != patterns[(i+1)%count])) { + rc = -ENODEV; + break; + } + } + + info->init_error = rc ? 0 : DiagStatus_AddressFailure; + return rc; +} + +static int irq_test(struct slgt_info *info) +{ + unsigned long timeout; + unsigned long flags; + struct tty_struct *oldtty = info->tty; + u32 speed = info->params.data_rate; + + info->params.data_rate = 921600; + info->tty = NULL; + + spin_lock_irqsave(&info->lock, flags); + async_mode(info); + slgt_irq_on(info, IRQ_TXIDLE); + + /* enable transmitter */ + wr_reg16(info, TCR, + (unsigned short)(rd_reg16(info, TCR) | BIT1)); + + /* write one byte and wait for tx idle */ + wr_reg16(info, TDR, 0); + + /* assume failure */ + info->init_error = DiagStatus_IrqFailure; + info->irq_occurred = FALSE; + + spin_unlock_irqrestore(&info->lock, flags); + + timeout=100; + while(timeout-- && !info->irq_occurred) + msleep_interruptible(10); + + spin_lock_irqsave(&info->lock,flags); + reset_port(info); + spin_unlock_irqrestore(&info->lock,flags); + + info->params.data_rate = speed; + info->tty = oldtty; + + info->init_error = info->irq_occurred ? 0 : DiagStatus_IrqFailure; + return info->irq_occurred ? 0 : -ENODEV; +} + +static int loopback_test_rx(struct slgt_info *info) +{ + unsigned char *src, *dest; + int count; + + if (desc_complete(info->rbufs[0])) { + count = desc_count(info->rbufs[0]); + src = info->rbufs[0].buf; + dest = info->tmp_rbuf; + + for( ; count ; count-=2, src+=2) { + /* src=data byte (src+1)=status byte */ + if (!(*(src+1) & (BIT9 + BIT8))) { + *dest = *src; + dest++; + info->tmp_rbuf_count++; + } + } + DBGDATA(info, info->tmp_rbuf, info->tmp_rbuf_count, "rx"); + return 1; + } + return 0; +} + +static int loopback_test(struct slgt_info *info) +{ +#define TESTFRAMESIZE 20 + + unsigned long timeout; + u16 count = TESTFRAMESIZE; + unsigned char buf[TESTFRAMESIZE]; + int rc = -ENODEV; + unsigned long flags; + + struct tty_struct *oldtty = info->tty; + MGSL_PARAMS params; + + memcpy(¶ms, &info->params, sizeof(params)); + + info->params.mode = MGSL_MODE_ASYNC; + info->params.data_rate = 921600; + info->params.loopback = 1; + info->tty = NULL; + + /* build and send transmit frame */ + for (count = 0; count < TESTFRAMESIZE; ++count) + buf[count] = (unsigned char)count; + + info->tmp_rbuf_count = 0; + memset(info->tmp_rbuf, 0, TESTFRAMESIZE); + + /* program hardware for HDLC and enabled receiver */ + spin_lock_irqsave(&info->lock,flags); + async_mode(info); + rx_start(info); + info->tx_count = count; + tx_load(info, buf, count); + tx_start(info); + spin_unlock_irqrestore(&info->lock, flags); + + /* wait for receive complete */ + for (timeout = 100; timeout; --timeout) { + msleep_interruptible(10); + if (loopback_test_rx(info)) { + rc = 0; + break; + } + } + + /* verify received frame length and contents */ + if (!rc && (info->tmp_rbuf_count != count || + memcmp(buf, info->tmp_rbuf, count))) { + rc = -ENODEV; + } + + spin_lock_irqsave(&info->lock,flags); + reset_adapter(info); + spin_unlock_irqrestore(&info->lock,flags); + + memcpy(&info->params, ¶ms, sizeof(info->params)); + info->tty = oldtty; + + info->init_error = rc ? DiagStatus_DmaFailure : 0; + return rc; +} + +static int adapter_test(struct slgt_info *info) +{ + DBGINFO(("testing %s\n", info->device_name)); + if ((info->init_error = register_test(info)) < 0) { + printk("register test failure %s addr=%08X\n", + info->device_name, info->phys_reg_addr); + } else if ((info->init_error = irq_test(info)) < 0) { + printk("IRQ test failure %s IRQ=%d\n", + info->device_name, info->irq_level); + } else if ((info->init_error = loopback_test(info)) < 0) { + printk("loopback test failure %s\n", info->device_name); + } + return info->init_error; +} + +/* + * transmit timeout handler + */ +static void tx_timeout(unsigned long context) +{ + struct slgt_info *info = (struct slgt_info*)context; + unsigned long flags; + + DBGINFO(("%s tx_timeout\n", info->device_name)); + if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) { + info->icount.txtimeout++; + } + spin_lock_irqsave(&info->lock,flags); + info->tx_active = 0; + info->tx_count = 0; + spin_unlock_irqrestore(&info->lock,flags); + +#ifdef CONFIG_HDLC + if (info->netcount) + hdlcdev_tx_done(info); + else +#endif + bh_transmit(info); +} + +/* + * receive buffer polling timer + */ +static void rx_timeout(unsigned long context) +{ + struct slgt_info *info = (struct slgt_info*)context; + unsigned long flags; + + DBGINFO(("%s rx_timeout\n", info->device_name)); + spin_lock_irqsave(&info->lock, flags); + info->pending_bh |= BH_RECEIVE; + spin_unlock_irqrestore(&info->lock, flags); + bh_handler(info); +} + diff --git a/include/linux/synclink.h b/include/linux/synclink.h index 763bd290f28..1b7cd8d1a71 100644 --- a/include/linux/synclink.h +++ b/include/linux/synclink.h @@ -1,7 +1,7 @@ /* * SyncLink Multiprotocol Serial Adapter Driver * - * $Id: synclink.h,v 3.6 2002/02/20 21:58:20 paulkf Exp $ + * $Id: synclink.h,v 3.10 2005/11/08 19:50:54 paulkf Exp $ * * Copyright (C) 1998-2000 by Microgate Corporation * @@ -128,10 +128,14 @@ #define MGSL_BUS_TYPE_EISA 2 #define MGSL_BUS_TYPE_PCI 5 +#define MGSL_INTERFACE_MASK 0xf #define MGSL_INTERFACE_DISABLE 0 #define MGSL_INTERFACE_RS232 1 #define MGSL_INTERFACE_V35 2 #define MGSL_INTERFACE_RS422 3 +#define MGSL_INTERFACE_RTS_EN 0x10 +#define MGSL_INTERFACE_LL 0x20 +#define MGSL_INTERFACE_RL 0x40 typedef struct _MGSL_PARAMS { @@ -163,6 +167,9 @@ typedef struct _MGSL_PARAMS #define SYNCLINK_DEVICE_ID 0x0010 #define MGSCC_DEVICE_ID 0x0020 #define SYNCLINK_SCA_DEVICE_ID 0x0030 +#define SYNCLINK_GT_DEVICE_ID 0x0070 +#define SYNCLINK_GT4_DEVICE_ID 0x0080 +#define SYNCLINK_AC_DEVICE_ID 0x0090 #define MGSL_MAX_SERIAL_NUMBER 30 /* -- 2.41.1