From 6fc21b82ef74911887ced1aff8d37ce079bb8b36 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 27 Nov 2006 12:10:23 +0900 Subject: [PATCH] sh: More flexible + SH7780 earlyprintk SCIF support. This makes the early printk support somewhat more flexible, moving the port definition to a config option, and making the port initialization configurable for sh-ipl+g users. At the same time, this allows us to trivially wire up the SH7780 SCIF0, so that's thrown in too more or less for free. Signed-off-by: Paul Mundt --- arch/sh/Kconfig.debug | 18 +++++++++++++- arch/sh/kernel/early_printk.c | 44 +++++++++++++++++------------------ drivers/serial/sh-sci.h | 1 + 3 files changed, 39 insertions(+), 24 deletions(-) diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 48479e014da..dcceec95a2d 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -17,7 +17,18 @@ config SH_STANDARD_BIOS config EARLY_SCIF_CONSOLE bool "Use early SCIF console" - depends on CPU_SH4 || CPU_SH2A && !SH_STANDARD_BIOS + help + This enables an early console using a fixed SCIF port. This can + be used by platforms that are either not running the SH + standard BIOS, or do not wish to use the BIOS callbacks for the + serial I/O. + +config EARLY_SCIF_CONSOLE_PORT + hex "SCIF port for early console" + depends on EARLY_SCIF_CONSOLE + default "0xffe00000" if CPU_SUBTYPE_SH7780 + default "0xfffe9800" if CPU_SUBTYPE_SH72060 + default "0xffe80000" if CPU_SH4 config EARLY_PRINTK bool "Early printk support" @@ -30,6 +41,11 @@ config EARLY_PRINTK when the kernel may crash or hang before the serial console is initialised. If unsure, say N. + On devices that are running SH-IPL and want to keep the port + initialization consistent while not using the BIOS callbacks, + select both the EARLY_SCIF_CONSOLE and SH_STANDARD_BIOS, using + the kernel command line option to toggle back and forth. + config DEBUG_STACKOVERFLOW bool "Check for stack overflows" depends on DEBUG_KERNEL diff --git a/arch/sh/kernel/early_printk.c b/arch/sh/kernel/early_printk.c index a00022722e9..60340823798 100644 --- a/arch/sh/kernel/early_printk.c +++ b/arch/sh/kernel/early_printk.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #ifdef CONFIG_SH_STANDARD_BIOS #include @@ -62,17 +62,9 @@ static struct console bios_console = { #include #include "../../../drivers/serial/sh-sci.h" -#ifdef CONFIG_CPU_SH4 -#define SCIF_REG 0xffe80000 -#elif defined(CONFIG_CPU_SUBTYPE_SH72060) -#define SCIF_REG 0xfffe9800 -#else -#error "Undefined SCIF for this subtype" -#endif - static struct uart_port scif_port = { - .mapbase = SCIF_REG, - .membase = (char __iomem *)SCIF_REG, + .mapbase = CONFIG_EARLY_SCIF_CONSOLE_PORT, + .membase = (char __iomem *)CONFIG_EARLY_SCIF_CONSOLE_PORT, }; static void scif_sercon_putc(int c) @@ -113,23 +105,29 @@ static struct console scif_console = { .index = -1, }; +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) +/* + * Simple SCIF init, primarily aimed at SH7750 and other similar SH-4 + * devices that aren't using sh-ipl+g. + */ static void scif_sercon_init(int baud) { - ctrl_outw(0, SCIF_REG + 8); - ctrl_outw(0, SCIF_REG); + ctrl_outw(0, scif_port.mapbase + 8); + ctrl_outw(0, scif_port.mapbase); /* Set baud rate */ ctrl_outb((CONFIG_SH_PCLK_FREQ + 16 * baud) / - (32 * baud) - 1, SCIF_REG + 4); - - ctrl_outw(12, SCIF_REG + 24); - ctrl_outw(8, SCIF_REG + 24); - ctrl_outw(0, SCIF_REG + 32); - ctrl_outw(0x60, SCIF_REG + 16); - ctrl_outw(0, SCIF_REG + 36); - ctrl_outw(0x30, SCIF_REG + 8); + (32 * baud) - 1, scif_port.mapbase + 4); + + ctrl_outw(12, scif_port.mapbase + 24); + ctrl_outw(8, scif_port.mapbase + 24); + ctrl_outw(0, scif_port.mapbase + 32); + ctrl_outw(0x60, scif_port.mapbase + 16); + ctrl_outw(0, scif_port.mapbase + 36); + ctrl_outw(0x30, scif_port.mapbase + 8); } -#endif +#endif /* CONFIG_CPU_SH4 && !CONFIG_SH_STANDARD_BIOS */ +#endif /* CONFIG_EARLY_SCIF_CONSOLE */ /* * Setup a default console, if more than one is compiled in, rely on the @@ -168,7 +166,7 @@ int __init setup_early_printk(char *opt) if (!strncmp(buf, "serial", 6)) { early_console = &scif_console; -#ifdef CONFIG_CPU_SH4 +#if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_STANDARD_BIOS) scif_sercon_init(115200); #endif } diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index b2bc0cfb401..e4557cc4f74 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -379,6 +379,7 @@ SCIx_FNS(SCxSR, 0x08, 8, 0x10, 8, 0x08, 16, 0x10, 16, 0x04, 8) SCIx_FNS(SCxRDR, 0x0a, 8, 0x14, 8, 0x0A, 8, 0x14, 8, 0x05, 8) SCIF_FNS(SCFCR, 0x0c, 8, 0x18, 16) #if defined(CONFIG_CPU_SUBTYPE_SH7760) || defined(CONFIG_CPU_SUBTYPE_SH7780) +SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCTFDR, 0x0e, 16, 0x1C, 16) SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16) SCIF_FNS(SCSPTR, 0, 0, 0x24, 16) -- 2.41.1