From 6ec9eae67a82a38865af20580e5e0ccd012aca4b Mon Sep 17 00:00:00 2001 From: Martyn Welch Date: Mon, 10 Nov 2008 12:31:33 +0000 Subject: [PATCH] [WATCHDOG] Enable watchdog timer on GE Fanuc's SBC610 Support for the FPGA based watchdog timer on GE Fanuc's SBC610. This patch enables one of the watchdog timers found on the SBC610. There are two identical watchdog timers at different offsets in the above mentioned boards, however the current driver is only capable of supporting one of them. The watchdog timers are also capable of generating interrupts at a user-configurable threshold, though support for this operation is currently not supported by the driver. Signed-off-by: Martyn Welch Signed-off-by: Wim Van Sebroeck --- arch/powerpc/boot/dts/gef_sbc610.dts | 15 +++++++++++++++ arch/powerpc/configs/86xx/gef_sbc610_defconfig | 1 + 2 files changed, 16 insertions(+) diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 9708b3423bb..e78c355c7ba 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -88,6 +88,21 @@ compatible = "gef,fpga-regs"; reg = <0x4 0x0 0x40>; }; + + wdt@4,2000 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2000 0x8>; + interrupts = <0x1a 0x4>; + interrupt-parent = <&gef_pic>; + }; + /* Second watchdog available, driver currently supports one. + wdt@4,2010 { + compatible = "gef,fpga-wdt"; + reg = <0x4 0x2010 0x8>; + interrupts = <0x1b 0x4>; + interrupt-parent = <&gef_pic>; + }; + */ gef_pic: pic@4,4000 { #interrupt-cells = <1>; interrupt-controller; diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index cd1ffa44932..391874c7b43 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1164,6 +1164,7 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_8xxx_WDT is not set +CONFIG_GEF_WDT=y # # PCI-based Watchdog Cards -- 2.41.1