From 689fe67c6d1ad8f52f7f7b139a3274b79bf3e784 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 Apr 2008 00:27:27 -0600 Subject: [PATCH] OMAP2/3 clock: Add non-CORE DPLL rate set code and M,N programming Add non-CORE DPLL rate set code and M,N programming for OMAP3. Connect it to OMAP34xx DPLLs 1, 2, 4, 5 via the clock framework. You may see some warnings on rate sets from the freqsel code. The table that TI presented in the 3430 TRM Rev F does not cover Fint < 750000, which definitely occurs in practice. However, the lack of this freqsel case does not appear to impair the DPLL rate change. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/clock34xx.c | 139 ++++++++++++++++++++++++++++++ arch/arm/mach-omap2/clock34xx.h | 11 +++ include/asm-arm/arch-omap/clock.h | 1 + 3 files changed, 151 insertions(+) diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c index a263db90c53..cf6b42fc3c3 100644 --- a/arch/arm/mach-omap2/clock34xx.c +++ b/arch/arm/mach-omap2/clock34xx.c @@ -101,6 +101,42 @@ static int _omap3_wait_dpll_status(struct clk *clk, u8 state) return ret; } +/* From 3430 TRM ES2 4.7.6.2 */ +static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n) +{ + unsigned long fint; + u16 f = 0; + + fint = clk->parent->rate / (n + 1); + + pr_debug("clock: fint is %lu\n", fint); + + if (fint >= 750000 && fint <= 1000000) + f = 0x3; + else if (fint > 1000000 && fint <= 1250000) + f = 0x4; + else if (fint > 1250000 && fint <= 1500000) + f = 0x5; + else if (fint > 1500000 && fint <= 1750000) + f = 0x6; + else if (fint > 1750000 && fint <= 2100000) + f = 0x7; + else if (fint > 7500000 && fint <= 10000000) + f = 0xB; + else if (fint > 10000000 && fint <= 12500000) + f = 0xC; + else if (fint > 12500000 && fint <= 15000000) + f = 0xD; + else if (fint > 15000000 && fint <= 17500000) + f = 0xE; + else if (fint > 17500000 && fint <= 21000000) + f = 0xF; + else + pr_debug("clock: unknown freqsel setting for %d\n", n); + + return f; +} + /* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */ /* @@ -267,6 +303,109 @@ static void omap3_noncore_dpll_disable(struct clk *clk) _omap3_noncore_dpll_stop(clk); } + +/* Non-CORE DPLL rate set code */ + +/* + * omap3_noncore_dpll_program - set non-core DPLL M,N values directly + * @clk: struct clk * of DPLL to set + * @m: DPLL multiplier to set + * @n: DPLL divider to set + * @freqsel: FREQSEL value to set + * + * Program the DPLL with the supplied M, N values, and wait for the DPLL to + * lock.. Returns -EINVAL upon error, or 0 upon success. + */ +static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel) +{ + struct dpll_data *dd; + u32 v; + + if (!clk) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + /* + * According to the 12-5 CDP code from TI, "Limitation 2.5" + * on 3430ES1 prevents us from changing DPLL multipliers or dividers + * on DPLL4. + */ + if (is_sil_rev_equal_to(OMAP3430_REV_ES1_0) && + !strcmp("dpll4_ck", clk->name)) { + printk(KERN_ERR "clock: DPLL4 cannot change rate due to " + "silicon 'Limitation 2.5' on 3430ES1.\n"); + return -EINVAL; + } + + /* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */ + _omap3_noncore_dpll_bypass(clk); + + v = __raw_readl(dd->mult_div1_reg); + v &= ~(dd->mult_mask | dd->div1_mask); + + /* Set mult (M), div1 (N), freqsel */ + v |= m << __ffs(dd->mult_mask); + v |= n << __ffs(dd->div1_mask); + v |= freqsel << __ffs(dd->freqsel_mask); + + __raw_writel(v, dd->mult_div1_reg); + + /* We let the clock framework set the other output dividers later */ + + /* REVISIT: Set ramp-up delay? */ + + _omap3_noncore_dpll_lock(clk); + + return 0; +} + +/** + * omap3_noncore_dpll_set_rate - set non-core DPLL rate + * @clk: struct clk * of DPLL to set + * @rate: rounded target rate + * + * Program the DPLL with the rounded target rate. Returns -EINVAL upon + * error, or 0 upon success. + */ +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) +{ + u16 freqsel; + struct dpll_data *dd; + + if (!clk || !rate) + return -EINVAL; + + dd = clk->dpll_data; + if (!dd) + return -EINVAL; + + if (rate == omap2_get_dpll_rate(clk)) + return 0; + + if (dd->last_rounded_rate != rate) + omap2_dpll_round_rate(clk, rate); + + if (dd->last_rounded_rate == 0) + return -EINVAL; + + freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n); + if (!freqsel) + WARN_ON(1); + + omap3_noncore_dpll_program(clk, dd->last_rounded_m, dd->last_rounded_n, + freqsel); + + omap3_dpll_recalc(clk); + + return 0; +} + +/* DPLL autoidle read/set code */ + + /** * omap3_dpll_autoidle_read - read a DPLL's autoidle bits * @clk: struct clk * of the DPLL to read diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h index 1e7d0463bc7..fc03999749b 100644 --- a/arch/arm/mach-omap2/clock34xx.h +++ b/arch/arm/mach-omap2/clock34xx.h @@ -34,6 +34,7 @@ static void omap3_dpll_deny_idle(struct clk *clk); static u32 omap3_dpll_autoidle_read(struct clk *clk); static int omap3_noncore_dpll_enable(struct clk *clk); static void omap3_noncore_dpll_disable(struct clk *clk); +static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate); /* Maximum DPLL multiplier, divider values for OMAP3 */ #define OMAP3_MAX_DPLL_MULT 2048 @@ -263,6 +264,7 @@ static struct dpll_data dpll1_dd = { .mult_div1_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_MPU_DPLL_MULT_MASK, .div1_mask = OMAP3430_MPU_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_MPU_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_MPU_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), @@ -284,6 +286,7 @@ static struct clk dpll1_ck = { .dpll_data = &dpll1_dd, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -329,6 +332,7 @@ static struct dpll_data dpll2_dd = { .mult_div1_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL), .mult_mask = OMAP3430_IVA2_DPLL_MULT_MASK, .div1_mask = OMAP3430_IVA2_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_IVA2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL), .enable_mask = OMAP3430_EN_IVA2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) | @@ -353,6 +357,7 @@ static struct clk dpll2_ck = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -387,6 +392,7 @@ static struct dpll_data dpll3_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1), .mult_mask = OMAP3430_CORE_DPLL_MULT_MASK, .div1_mask = OMAP3430_CORE_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_CORE_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_CORE_DPLL_MASK, .auto_recal_bit = OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT, @@ -405,6 +411,7 @@ static struct clk dpll3_ck = { .dpll_data = &dpll3_dd, .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES | ALWAYS_ENABLED, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -565,6 +572,7 @@ static struct dpll_data dpll4_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2), .mult_mask = OMAP3430_PERIPH_DPLL_MULT_MASK, .div1_mask = OMAP3430_PERIPH_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430_PERIPH_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN), .enable_mask = OMAP3430_EN_PERIPH_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -588,6 +596,7 @@ static struct clk dpll4_ck = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; @@ -867,6 +876,7 @@ static struct dpll_data dpll5_dd = { .mult_div1_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4), .mult_mask = OMAP3430ES2_PERIPH2_DPLL_MULT_MASK, .div1_mask = OMAP3430ES2_PERIPH2_DPLL_DIV_MASK, + .freqsel_mask = OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK, .control_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2), .enable_mask = OMAP3430ES2_EN_PERIPH2_DPLL_MASK, .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), @@ -890,6 +900,7 @@ static struct clk dpll5_ck = { .enable = &omap3_noncore_dpll_enable, .disable = &omap3_noncore_dpll_disable, .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, .recalc = &omap3_dpll_recalc, }; diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index c16aa442e1c..cce55badff4 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -43,6 +43,7 @@ struct dpll_data { u8 max_divider; u32 max_tolerance; # if defined(CONFIG_ARCH_OMAP3) + u32 freqsel_mask; u8 modes; void __iomem *control_reg; u32 enable_mask; -- 2.41.1