From 62128b2ca812c1266f4ff7bac068bf0b626c6179 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: [PATCH] opti621: disable read prefetch This fixes 2.6.25 regression (kernel.org bugzilla bug #10723) caused by: commit 912fb29a36a7269ac1c4a4df45bc0ac1d2637972 Author: Bartlomiej Zolnierkiewicz Date: Fri Oct 19 00:30:11 2007 +0200 opti621: always tune PIO ... Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Bisected-by: Juergen Kosel Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/pci/opti621.c | 15 ++------------- 1 file changed, 2 insertions(+), 13 deletions(-) diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080497b..e31e0f970a2 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -102,18 +102,6 @@ * address: 50 ns, data: 50 ns, recovery: 100 ns. */ -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -264,7 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); + + misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG printk("%s: master: address: %d, data: %d, " -- 2.41.1