From 5b802344357338a4d645beac8ca97470bcbe3542 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Thu, 4 May 2006 14:07:42 +0100 Subject: [PATCH] [ARM] 3490/1: i.MX: move uart resources to board files Patch from Sascha Hauer This patch moves the i.MX uart resources and the gpio pin setup to the board files. This allows the boards to decide how many internal uarts are connected to the outside world and whether they use rts/cts or not. Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-imx/generic.c | 52 -------------------- arch/arm/mach-imx/mx1ads.c | 74 +++++++++++++++++++++++++++++ drivers/serial/imx.c | 40 +++++++--------- include/asm-arm/arch-imx/imx-uart.h | 10 ++++ 4 files changed, 100 insertions(+), 76 deletions(-) create mode 100644 include/asm-arm/arch-imx/imx-uart.h diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 9d8331be2b5..12ea58a3b84 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -195,56 +195,6 @@ void __init imx_set_mmc_info(struct imxmmc_platform_data *info) } EXPORT_SYMBOL(imx_set_mmc_info); -static struct resource imx_uart1_resources[] = { - [0] = { - .start = 0x00206000, - .end = 0x002060FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART1_MINT_RX), - .end = (UART1_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART1_MINT_TX), - .end = (UART1_MINT_TX), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart1_device = { - .name = "imx-uart", - .id = 0, - .num_resources = ARRAY_SIZE(imx_uart1_resources), - .resource = imx_uart1_resources, -}; - -static struct resource imx_uart2_resources[] = { - [0] = { - .start = 0x00207000, - .end = 0x002070FF, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = (UART2_MINT_RX), - .end = (UART2_MINT_RX), - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = (UART2_MINT_TX), - .end = (UART2_MINT_TX), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device imx_uart2_device = { - .name = "imx-uart", - .id = 1, - .num_resources = ARRAY_SIZE(imx_uart2_resources), - .resource = imx_uart2_resources, -}; - static struct imxfb_mach_info imx_fb_info; void __init set_imx_fb_info(struct imxfb_mach_info *hard_imx_fb_info) @@ -283,8 +233,6 @@ static struct platform_device imxfb_device = { static struct platform_device *devices[] __initdata = { &imx_mmc_device, &imxfb_device, - &imx_uart1_device, - &imx_uart2_device, }; static struct map_desc imx_io_desc[] __initdata = { diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index e34d0df90ae..e1f6c0bbe1e 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -26,6 +26,7 @@ #include #include +#include #include #include "generic.h" @@ -48,8 +49,70 @@ static struct platform_device cs89x0_device = { .resource = cs89x0_resources, }; +static struct imxuart_platform_data uart_pdata = { + .flags = IMXUART_HAVE_RTSCTS, +}; + +static struct resource imx_uart1_resources[] = { + [0] = { + .start = 0x00206000, + .end = 0x002060FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (UART1_MINT_RX), + .end = (UART1_MINT_RX), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = (UART1_MINT_TX), + .end = (UART1_MINT_TX), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device imx_uart1_device = { + .name = "imx-uart", + .id = 0, + .num_resources = ARRAY_SIZE(imx_uart1_resources), + .resource = imx_uart1_resources, + .dev = { + .platform_data = &uart_pdata, + } +}; + +static struct resource imx_uart2_resources[] = { + [0] = { + .start = 0x00207000, + .end = 0x002070FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = (UART2_MINT_RX), + .end = (UART2_MINT_RX), + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = (UART2_MINT_TX), + .end = (UART2_MINT_TX), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device imx_uart2_device = { + .name = "imx-uart", + .id = 1, + .num_resources = ARRAY_SIZE(imx_uart2_resources), + .resource = imx_uart2_resources, + .dev = { + .platform_data = &uart_pdata, + } +}; + static struct platform_device *devices[] __initdata = { &cs89x0_device, + &imx_uart1_device, + &imx_uart2_device, }; #ifdef CONFIG_MMC_IMX @@ -75,6 +138,17 @@ mx1ads_init(void) imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20); imx_set_mmc_info(&mx1ads_mmc_info); #endif + + imx_gpio_mode(PC9_PF_UART1_CTS); + imx_gpio_mode(PC10_PF_UART1_RTS); + imx_gpio_mode(PC11_PF_UART1_TXD); + imx_gpio_mode(PC12_PF_UART1_RXD); + + imx_gpio_mode(PB28_PF_UART2_CTS); + imx_gpio_mode(PB29_PF_UART2_RTS); + imx_gpio_mode(PB30_PF_UART2_TXD); + imx_gpio_mode(PB31_PF_UART2_RXD); + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c index c3b7a6673e9..d202eb4f384 100644 --- a/drivers/serial/imx.c +++ b/drivers/serial/imx.c @@ -45,6 +45,7 @@ #include #include #include +#include /* We've been assigned a range on the "Low-density serial ports" major */ #define SERIAL_IMX_MAJOR 204 @@ -73,7 +74,8 @@ struct imx_port { struct uart_port port; struct timer_list timer; unsigned int old_status; - int txirq,rxirq,rtsirq; + int txirq,rxirq,rtsirq; + int have_rtscts:1; }; /* @@ -491,8 +493,12 @@ imx_set_termios(struct uart_port *port, struct termios *termios, ucr2 = UCR2_SRST | UCR2_IRTS; if (termios->c_cflag & CRTSCTS) { - ucr2 &= ~UCR2_IRTS; - ucr2 |= UCR2_CTSC; + if( sport->have_rtscts ) { + ucr2 &= ~UCR2_IRTS; + ucr2 |= UCR2_CTSC; + } else { + termios->c_cflag &= ~CRTSCTS; + } } if (termios->c_cflag & CSTOPB) @@ -719,27 +725,6 @@ static void __init imx_init_ports(void) imx_ports[i].timer.function = imx_timeout; imx_ports[i].timer.data = (unsigned long)&imx_ports[i]; } - - imx_gpio_mode(PC9_PF_UART1_CTS); - imx_gpio_mode(PC10_PF_UART1_RTS); - imx_gpio_mode(PC11_PF_UART1_TXD); - imx_gpio_mode(PC12_PF_UART1_RXD); - imx_gpio_mode(PB28_PF_UART2_CTS); - imx_gpio_mode(PB29_PF_UART2_RTS); - - imx_gpio_mode(PB30_PF_UART2_TXD); - imx_gpio_mode(PB31_PF_UART2_RXD); - -#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart - * is implemented. - */ - imx_gpio_mode(PD7_AF_UART2_DTR); - imx_gpio_mode(PD8_AF_UART2_DCD); - imx_gpio_mode(PD9_AF_UART2_RI); - imx_gpio_mode(PD10_AF_UART2_DSR); -#endif - - } #ifdef CONFIG_SERIAL_IMX_CONSOLE @@ -932,7 +917,14 @@ static int serial_imx_resume(struct platform_device *dev) static int serial_imx_probe(struct platform_device *dev) { + struct imxuart_platform_data *pdata; + imx_ports[dev->id].port.dev = &dev->dev; + + pdata = (struct imxuart_platform_data *)dev->dev.platform_data; + if(pdata && (pdata->flags & IMXUART_HAVE_RTSCTS)) + imx_ports[dev->id].have_rtscts = 1; + uart_add_one_port(&imx_reg, &imx_ports[dev->id].port); platform_set_drvdata(dev, &imx_ports[dev->id]); return 0; diff --git a/include/asm-arm/arch-imx/imx-uart.h b/include/asm-arm/arch-imx/imx-uart.h new file mode 100644 index 00000000000..3a685e1780e --- /dev/null +++ b/include/asm-arm/arch-imx/imx-uart.h @@ -0,0 +1,10 @@ +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) + +struct imxuart_platform_data { + unsigned int flags; +}; + +#endif -- 2.41.1