From 56c819df77f96c3fc0c2a979e12b478403728790 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 19 Feb 2008 11:35:37 +0100 Subject: [PATCH] libata: update ATAPI overflow draining For misc ATAPI commands which transfer variable length data to the host, overflow can occur due to application or hardware bug. Such overflows can be ignored safely as long as overflow data is properly drained. libata HSM implementation has this implemented in __atapi_pio_bytes() and recently updated for 2.6.24-rc but it requires further improvements. Improve drain logic such that... * Report overflow errors using ehi desc mechanism instead of printing directly. * Properly calculate the number of bytes to be drained considering actual number of consumed bytes for partial draining. Signed-off-by: Tejun Heo Acked-by: Albert Lee Signed-off-by: Jens Axboe --- drivers/ata/libata-core.c | 76 +++++++++++++++++---------------------- 1 file changed, 33 insertions(+), 43 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index f46eb6f6dc9..a109ccbda9c 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4675,24 +4675,9 @@ int ata_check_atapi_dma(struct ata_queued_cmd *qc) */ static int atapi_qc_may_overflow(struct ata_queued_cmd *qc) { - if (qc->tf.protocol != ATAPI_PROT_PIO && - qc->tf.protocol != ATAPI_PROT_DMA) - return 0; - - if (qc->tf.flags & ATA_TFLAG_WRITE) - return 0; - - switch (qc->cdb[0]) { - case READ_10: - case READ_12: - case WRITE_10: - case WRITE_12: - case GPCMD_READ_CD: - case GPCMD_READ_CD_MSF: - return 0; - } - - return 1; + return ata_is_atapi(qc->tf.protocol) && ata_is_data(qc->tf.protocol) && + atapi_cmd_type(qc->cdb[0]) == ATAPI_MISC && + !(qc->tf.flags & ATA_TFLAG_WRITE); } /** @@ -5146,13 +5131,14 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) */ static int __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) { - int do_write = (qc->tf.flags & ATA_TFLAG_WRITE); + int rw = (qc->tf.flags & ATA_TFLAG_WRITE) ? WRITE : READ; struct ata_port *ap = qc->ap; - struct ata_eh_info *ehi = &qc->dev->link->eh_info; + struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; struct scatterlist *sg; struct page *page; unsigned char *buf; - unsigned int offset, count; + unsigned int offset, count, consumed; next_sg: sg = qc->cursg; @@ -5165,26 +5151,27 @@ next_sg: * - for write case, padding zero data to the device */ u16 pad_buf[1] = { 0 }; - unsigned int i; - if (bytes > qc->curbytes - qc->nbytes + ATAPI_MAX_DRAIN) { + if (qc->curbytes + bytes > qc->nbytes + ATAPI_MAX_DRAIN) { ata_ehi_push_desc(ehi, "too much trailing data " "buf=%u cur=%u bytes=%u", qc->nbytes, qc->curbytes, bytes); return -1; } - /* overflow is exptected for misc ATAPI commands */ - if (bytes && !atapi_qc_may_overflow(qc)) - ata_dev_printk(qc->dev, KERN_WARNING, "ATAPI %u bytes " - "trailing data (cdb=%02x nbytes=%u)\n", - bytes, qc->cdb[0], qc->nbytes); + /* allow overflow only for misc ATAPI commands */ + if (!atapi_qc_may_overflow(qc)) { + ata_ehi_push_desc(ehi, "unexpected trailing data " + "%u bytes", bytes); + return -1; + } - for (i = 0; i < (bytes + 1) / 2; i++) - ap->ops->data_xfer(qc->dev, (unsigned char *)pad_buf, 2, do_write); + consumed = 0; + while (consumed < bytes) + consumed += ap->ops->data_xfer(dev, + (unsigned char *)pad_buf, 2, rw); qc->curbytes += bytes; - return 0; } @@ -5211,18 +5198,16 @@ next_sg: buf = kmap_atomic(page, KM_IRQ0); /* do the actual data transfer */ - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); kunmap_atomic(buf, KM_IRQ0); local_irq_restore(flags); } else { buf = page_address(page); - ap->ops->data_xfer(qc->dev, buf + offset, count, do_write); + consumed = ap->ops->data_xfer(dev, buf + offset, count, rw); } - bytes -= count; - if ((count & 1) && bytes) - bytes--; + bytes -= min(bytes, consumed); qc->curbytes += count; qc->cursg_ofs += count; @@ -5231,9 +5216,11 @@ next_sg: qc->cursg_ofs = 0; } + /* consumed can be larger than count only for the last transfer */ + WARN_ON(qc->cursg && count != consumed); + if (bytes) goto next_sg; - return 0; } @@ -5251,6 +5238,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; struct ata_device *dev = qc->dev; + struct ata_eh_info *ehi = &dev->link->eh_info; unsigned int ireason, bc_lo, bc_hi, bytes; int i_write, do_write = (qc->tf.flags & ATA_TFLAG_WRITE) ? 1 : 0; @@ -5268,26 +5256,28 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) /* shall be cleared to zero, indicating xfer of data */ if (unlikely(ireason & (1 << 0))) - goto err_out; + goto atapi_check; /* make sure transfer direction matches expected */ i_write = ((ireason & (1 << 1)) == 0) ? 1 : 0; if (unlikely(do_write != i_write)) - goto err_out; + goto atapi_check; if (unlikely(!bytes)) - goto err_out; + goto atapi_check; VPRINTK("ata%u: xfering %d bytes\n", ap->print_id, bytes); - if (__atapi_pio_bytes(qc, bytes)) + if (unlikely(__atapi_pio_bytes(qc, bytes))) goto err_out; ata_altstatus(ap); /* flush */ return; -err_out: - ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n"); + atapi_check: + ata_ehi_push_desc(ehi, "ATAPI check failed (ireason=0x%x bytes=%u)", + ireason, bytes); + err_out: qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } -- 2.41.1