From 49a66a0bcea8737e82035a31ad0d8cd64d027a5d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 14 Jul 2008 19:08:13 +0100 Subject: [PATCH] x86: I/O APIC: Always report how the timer has been set up Following recent (and less so) issues with the 8254 timer when routed through the I/O or local APIC, always report which configurations have been tried and which one has been set up eventually. This is so that logs posted by people for some other reason can be used as a cross-reference when investigating any possible future problems. The change unifies messages printed on 32-bit and 64-bit platforms and adds trailing newlines (removes leading ones), so that proper log level annotation can be used and any possible interspersed output will not cause a mess. I have chosen to use apic_printk(APIC_QUIET, ...) rather than printk(...) so that the distinction of these messages is maintained making possible future decisions about changes in this area easier. A change posted separately making apic_verbosity unsigned removes any extra code that would otherwise be generated as a result of this design decision. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ingo Molnar --- arch/x86/kernel/io_apic_32.c | 39 ++++++++++++++++++++--------------- arch/x86/kernel/io_apic_64.c | 40 ++++++++++++++++++++---------------- 2 files changed, 44 insertions(+), 35 deletions(-) diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index eabaf9244f5..de9aa0e3a9c 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2177,8 +2177,9 @@ static inline void __init check_timer(void) pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; - printk(KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - vector, apic1, pin1, apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + vector, apic1, pin1, apic2, pin2); /* * Some BIOS writers are clueless and report the ExtINTA @@ -2216,12 +2217,13 @@ static inline void __init check_timer(void) } clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) - printk(KERN_ERR "..MP-BIOS bug: " - "8254 timer not connected to IO-APIC\n"); + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " + "8254 timer not connected to IO-APIC\n"); - printk(KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - printk("\n..... (found pin %d) ...", pin2); + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ @@ -2230,7 +2232,7 @@ static inline void __init check_timer(void) unmask_IO_APIC_irq(0); enable_8259A_irq(0); if (timer_irq_works()) { - printk("works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -2244,30 +2246,33 @@ static inline void __init check_timer(void) */ disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); - printk(" failed.\n"); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); + apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " + "through the IO-APIC - disabling NMI Watchdog!\n"); nmi_watchdog = NMI_NONE; } timer_ack = 0; - printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); lapic_register_intr(0, vector); apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); if (timer_irq_works()) { - printk(" works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); - printk(" failed.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); - printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); init_8259A(0); make_8259A_irq(0); @@ -2276,12 +2281,12 @@ static inline void __init check_timer(void) unlock_ExtINT_logic(); if (timer_irq_works()) { - printk(" works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } - printk(" failed :(.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " - "report. Then try booting with the 'noapic' option"); + "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } diff --git a/arch/x86/kernel/io_apic_64.c b/arch/x86/kernel/io_apic_64.c index 834b06afef4..64a46affd85 100644 --- a/arch/x86/kernel/io_apic_64.c +++ b/arch/x86/kernel/io_apic_64.c @@ -1697,8 +1697,9 @@ static inline void __init check_timer(void) pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; - apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - cfg->vector, apic1, pin1, apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " + "apic1=%d pin1=%d apic2=%d pin2=%d\n", + cfg->vector, apic1, pin1, apic2, pin2); /* * Some BIOS writers are clueless and report the ExtINTA @@ -1736,14 +1737,13 @@ static inline void __init check_timer(void) } clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: " + apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " "8254 timer not connected to IO-APIC\n"); - apic_printk(APIC_VERBOSE,KERN_INFO - "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", - apic2, pin2); + apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " + "(IRQ0) through the 8259A ...\n"); + apic_printk(APIC_QUIET, KERN_INFO + "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ @@ -1752,7 +1752,7 @@ static inline void __init check_timer(void) unmask_IO_APIC_irq(0); enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); timer_through_8259 = 1; if (nmi_watchdog == NMI_IO_APIC) { disable_8259A_irq(0); @@ -1766,29 +1766,32 @@ static inline void __init check_timer(void) */ disable_8259A_irq(0); clear_IO_APIC_pin(apic2, pin2); - apic_printk(APIC_VERBOSE," failed.\n"); + apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); + apic_printk(APIC_QUIET, KERN_WARNING "timer doesn't work " + "through the IO-APIC - disabling NMI Watchdog!\n"); nmi_watchdog = NMI_NONE; } - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as Virtual Wire IRQ...\n"); lapic_register_intr(0); apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ enable_8259A_irq(0); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } disable_8259A_irq(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); - apic_printk(APIC_VERBOSE," failed.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ..."); + apic_printk(APIC_QUIET, KERN_INFO + "...trying to set up timer as ExtINT IRQ...\n"); init_8259A(0); make_8259A_irq(0); @@ -1797,11 +1800,12 @@ static inline void __init check_timer(void) unlock_ExtINT_logic(); if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } - apic_printk(APIC_VERBOSE," failed :(.\n"); - panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); + apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); + panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " + "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } -- 2.41.1