From 467e1559a2c23e46906a13388b659fbf2e9abaf9 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 4 Jul 2006 01:35:04 -0700 Subject: [PATCH] USB: Undefined usb_disconnect Various fixes for the OHCI OMAP glue: - Properly use the usbcore HCD lifecycle entry points - Remove calls to non-exported usbcore routines. - Stop inappropriate export of some bus glue calls Plus remove some extra whitespace. --- drivers/usb/host/ohci-omap.c | 64 ++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 35 deletions(-) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index b17f8f22ffa..7c3b46185d7 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -4,7 +4,7 @@ * (C) Copyright 1999 Roman Weissgaerber * (C) Copyright 2000-2005 David Brownell * (C) Copyright 2002 Hewlett-Packard Company - * + * * OMAP Bus Glue * * Modified for OMAP by Tony Lindgren @@ -92,14 +92,14 @@ static int omap_ohci_transceiver_power(int on) if (on) { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + | ((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, LOW); } else { if (machine_is_omap_innovator() && cpu_is_omap1510()) fpga_write(fpga_read(INNOVATOR_FPGA_CAM_USB_CONTROL) - & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), + & ~((1 << 5/*usb1*/) | (1 << 3/*usb2*/)), INNOVATOR_FPGA_CAM_USB_CONTROL); else if (machine_is_omap_osk()) tps65010_set_gpio_out_value(GPIO1, HIGH); @@ -127,8 +127,8 @@ static int omap_1510_local_bus_power(int on) /* * OMAP-1510 specific Local Bus initialization * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE. - * See also arch/mach-omap/memory.h for __virt_to_dma() and - * __dma_to_virt() which need to match with the physical + * See also arch/mach-omap/memory.h for __virt_to_dma() and + * __dma_to_virt() which need to match with the physical * Local Bus address below. */ static int omap_1510_local_bus_init(void) @@ -136,7 +136,7 @@ static int omap_1510_local_bus_init(void) unsigned int tlb; unsigned long lbaddr, physaddr; - omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, + omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4, OMAP1510_LB_CLOCK_DIV); /* Configure the Local Bus MMU table */ @@ -144,7 +144,7 @@ static int omap_1510_local_bus_init(void) lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET; physaddr = tlb * 0x00100000 + PHYS_OFFSET; omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H); - omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, + omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc, OMAP1510_LB_MMU_CAM_L); omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H); omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L); @@ -183,13 +183,14 @@ static void start_hnp(struct ohci_hcd *ohci) /*-------------------------------------------------------------------------*/ -static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) +static int ohci_omap_init(struct usb_hcd *hcd) { - struct omap_usb_config *config = pdev->dev.platform_data; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct omap_usb_config *config = hcd->self.controller->platform_data; int need_transceiver = (config->otg != 0); int ret; - dev_dbg(&pdev->dev, "starting USB Controller\n"); + dev_dbg(hcd->self.controller, "starting USB Controller\n"); if (config->otg) { ohci_to_hcd(ohci)->self.otg_port = config->otg; @@ -210,7 +211,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) if (ohci->transceiver) { int status = otg_set_host(ohci->transceiver, &ohci_to_hcd(ohci)->self); - dev_dbg(&pdev->dev, "init %s transceiver, status %d\n", + dev_dbg(hcd->self.controller, "init %s transceiver, status %d\n", ohci->transceiver->label, status); if (status) { if (ohci->transceiver) @@ -218,7 +219,7 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) return status; } } else { - dev_err(&pdev->dev, "can't find transceiver\n"); + dev_err(hcd->self.controller, "can't find transceiver\n"); return -ENODEV; } } @@ -274,17 +275,15 @@ static int omap_start_hc(struct ohci_hcd *ohci, struct platform_device *pdev) return 0; } -static void omap_stop_hc(struct platform_device *pdev) +static void ohci_omap_stop(struct usb_hcd *hcd) { - dev_dbg(&pdev->dev, "stopping USB Controller\n"); + dev_dbg(hcd->self.controller, "stopping USB Controller\n"); omap_ohci_clock_power(0); } /*-------------------------------------------------------------------------*/ -void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *); - /** * usb_hcd_omap_probe - initialize OMAP-based HCDs * Context: !in_interrupt() @@ -293,7 +292,7 @@ void usb_hcd_omap_remove (struct usb_hcd *, struct platform_device *); * then invokes the start() method for the HCD associated with it * through the hotplug entry's driver_data. */ -int usb_hcd_omap_probe (const struct hc_driver *driver, +static int usb_hcd_omap_probe (const struct hc_driver *driver, struct platform_device *pdev) { int retval, irq; @@ -301,12 +300,12 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, struct ohci_hcd *ohci; if (pdev->num_resources != 2) { - printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", + printk(KERN_ERR "hcd probe: invalid num_resources: %i\n", pdev->num_resources); return -ENODEV; } - if (pdev->resource[0].flags != IORESOURCE_MEM + if (pdev->resource[0].flags != IORESOURCE_MEM || pdev->resource[1].flags != IORESOURCE_IRQ) { printk(KERN_ERR "hcd probe: invalid resource type\n"); return -ENODEV; @@ -349,10 +348,6 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, host_initialized = 0; host_enabled = 1; - retval = omap_start_hc(ohci, pdev); - if (retval < 0) - goto err2; - irq = platform_get_irq(pdev, 0); if (irq < 0) { retval = -ENXIO; @@ -360,7 +355,7 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, } retval = usb_add_hcd(hcd, irq, SA_INTERRUPT); if (retval) - goto err3; + goto err2; host_initialized = 1; @@ -368,8 +363,6 @@ int usb_hcd_omap_probe (const struct hc_driver *driver, omap_ohci_clock_power(0); return 0; -err3: - omap_stop_hc(pdev); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: @@ -391,14 +384,19 @@ err0: * Reverses the effect of usb_hcd_omap_probe(), first invoking * the HCD's stop() method. It is always called from a thread * context, normally "rmmod", "apmd", or something similar. - * */ -void usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) +static inline void +usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev) { + struct ohci_hcd *ohci = hcd_to_ohci (hcd); + usb_remove_hcd(hcd); + if (ohci->transceiver) { + (void) otg_set_host(ohci->transceiver, 0); + put_device(ohci->transceiver->dev); + } if (machine_is_omap_osk()) omap_free_gpio(9); - omap_stop_hc(pdev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); clk_put(usb_dc_ck); @@ -444,8 +442,9 @@ static const struct hc_driver ohci_omap_hc_driver = { /* * basic lifecycle operations */ + .reset = ohci_omap_init, .start = ohci_omap_start, - .stop = ohci_stop, + .stop = ohci_omap_stop, /* * managing i/o requests and associated device resources @@ -481,13 +480,8 @@ static int ohci_hcd_omap_drv_probe(struct platform_device *dev) static int ohci_hcd_omap_drv_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); - struct ohci_hcd *ohci = hcd_to_ohci (hcd); usb_hcd_omap_remove(hcd, dev); - if (ohci->transceiver) { - (void) otg_set_host(ohci->transceiver, 0); - put_device(ohci->transceiver->dev); - } platform_set_drvdata(dev, NULL); return 0; -- 2.41.1