From 44defeb3f6f98ea9bb48a2fe6eb9004e9e1a49a1 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 4 Aug 2008 17:20:41 -0700 Subject: [PATCH] e1000e: convert ndev_ printks to something smaller The ndev_* printk's are too lenghty and we don't need to specify the adapter/netdev struct at all, making this a lot more readable. Signed-off-by: Jeff Kirsher Signed-off-by: Auke Kok Signed-off-by: Jeff Garzik --- drivers/net/e1000e/e1000.h | 27 +++--- drivers/net/e1000e/ethtool.c | 44 ++++------ drivers/net/e1000e/netdev.c | 154 ++++++++++++++++------------------- drivers/net/e1000e/param.c | 31 +++---- 4 files changed, 112 insertions(+), 144 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index 4a4f62e002b..d3ed1ed6329 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -41,24 +41,25 @@ struct e1000_info; -#define ndev_printk(level, netdev, format, arg...) \ - printk(level "%s: " format, (netdev)->name, ## arg) +#define e_printk(level, adapter, format, arg...) \ + printk(level "%s: %s: " format, pci_name(adapter->pdev), \ + adapter->netdev->name, ## arg) #ifdef DEBUG -#define ndev_dbg(netdev, format, arg...) \ - ndev_printk(KERN_DEBUG , netdev, format, ## arg) +#define e_dbg(format, arg...) \ + e_printk(KERN_DEBUG , adapter, format, ## arg) #else -#define ndev_dbg(netdev, format, arg...) do { (void)(netdev); } while (0) +#define e_dbg(format, arg...) do { (void)(adapter); } while (0) #endif -#define ndev_err(netdev, format, arg...) \ - ndev_printk(KERN_ERR , netdev, format, ## arg) -#define ndev_info(netdev, format, arg...) \ - ndev_printk(KERN_INFO , netdev, format, ## arg) -#define ndev_warn(netdev, format, arg...) \ - ndev_printk(KERN_WARNING , netdev, format, ## arg) -#define ndev_notice(netdev, format, arg...) \ - ndev_printk(KERN_NOTICE , netdev, format, ## arg) +#define e_err(format, arg...) \ + e_printk(KERN_ERR, adapter, format, ## arg) +#define e_info(format, arg...) \ + e_printk(KERN_INFO, adapter, format, ## arg) +#define e_warn(format, arg...) \ + e_printk(KERN_WARNING, adapter, format, ## arg) +#define e_notice(format, arg...) \ + e_printk(KERN_NOTICE, adapter, format, ## arg) /* Tx/Rx descriptor defines */ diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 9350564065e..cf9679f2b7c 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -189,8 +189,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) /* Fiber NICs only allow 1000 gbps Full duplex */ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) && spddplx != (SPEED_1000 + DUPLEX_FULL)) { - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } @@ -213,8 +212,7 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u16 spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - ndev_err(adapter->netdev, "Unsupported Speed/Duplex " - "configuration\n"); + e_err("Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -231,8 +229,8 @@ static int e1000_set_settings(struct net_device *netdev, * cannot be changed */ if (e1000_check_reset_block(hw)) { - ndev_err(netdev, "Cannot change link " - "characteristics when SoL/IDER is active.\n"); + e_err("Cannot change link characteristics when SoL/IDER is " + "active.\n"); return -EINVAL; } @@ -380,8 +378,7 @@ static int e1000_set_tso(struct net_device *netdev, u32 data) netdev->features &= ~NETIF_F_TSO6; } - ndev_info(netdev, "TSO is %s\n", - data ? "Enabled" : "Disabled"); + e_info("TSO is %s\n", data ? "Enabled" : "Disabled"); adapter->flags |= FLAG_TSO_FORCE; return 0; } @@ -722,10 +719,9 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, (test[pat] & write)); val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset); if (val != (test[pat] & write & mask)) { - ndev_err(adapter->netdev, "pattern test reg %04X " - "failed: got 0x%08X expected 0x%08X\n", - reg + offset, - val, (test[pat] & write & mask)); + e_err("pattern test reg %04X failed: got 0x%08X " + "expected 0x%08X\n", reg + offset, val, + (test[pat] & write & mask)); *data = reg; return 1; } @@ -740,9 +736,8 @@ static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, __ew32(&adapter->hw, reg, write & mask); val = __er32(&adapter->hw, reg); if ((write & mask) != (val & mask)) { - ndev_err(adapter->netdev, "set/check reg %04X test failed: " - "got 0x%08X expected 0x%08X\n", reg, (val & mask), - (write & mask)); + e_err("set/check reg %04X test failed: got 0x%08X " + "expected 0x%08X\n", reg, (val & mask), (write & mask)); *data = reg; return 1; } @@ -766,7 +761,6 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) { struct e1000_hw *hw = &adapter->hw; struct e1000_mac_info *mac = &adapter->hw.mac; - struct net_device *netdev = adapter->netdev; u32 value; u32 before; u32 after; @@ -799,8 +793,8 @@ static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data) ew32(STATUS, toggle); after = er32(STATUS) & toggle; if (value != after) { - ndev_err(netdev, "failed STATUS register test got: " - "0x%08X expected: 0x%08X\n", after, value); + e_err("failed STATUS register test got: 0x%08X expected: " + "0x%08X\n", after, value); *data = 1; return 1; } @@ -903,8 +897,7 @@ static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data) *data = 1; return -1; } - ndev_info(netdev, "testing %s interrupt\n", - (shared_int ? "shared" : "unshared")); + e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared")); /* Disable all the interrupts */ ew32(IMC, 0xFFFFFFFF); @@ -1526,8 +1519,7 @@ static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data) * sessions are active */ if (e1000_check_reset_block(&adapter->hw)) { - ndev_err(adapter->netdev, "Cannot do PHY loopback test " - "when SoL/IDER is active.\n"); + e_err("Cannot do PHY loopback test when SoL/IDER is active.\n"); *data = 0; goto out; } @@ -1612,7 +1604,7 @@ static void e1000_diag_test(struct net_device *netdev, forced_speed_duplex = adapter->hw.mac.forced_speed_duplex; autoneg = adapter->hw.mac.autoneg; - ndev_info(netdev, "offline testing starting\n"); + e_info("offline testing starting\n"); /* * Link test performed before hardware reset so autoneg doesn't @@ -1658,7 +1650,7 @@ static void e1000_diag_test(struct net_device *netdev, if (if_running) dev_open(netdev); } else { - ndev_info(netdev, "online testing starting\n"); + e_info("online testing starting\n"); /* Online tests */ if (e1000_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1694,8 +1686,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported &= ~WAKE_UCAST; if (adapter->wol & E1000_WUFC_EX) - ndev_err(netdev, "Interface does not support " - "directed (unicast) frame wake-up packets\n"); + e_err("Interface does not support directed (unicast) " + "frame wake-up packets\n"); } if (adapter->wol & E1000_WUFC_EX) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index d1367789976..378335f2b23 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -484,8 +484,8 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, * packet, also make sure the frame isn't just CRC only */ if (!(status & E1000_RXD_STAT_EOP) || (length <= 4)) { /* All receives must fit into a single buffer */ - ndev_dbg(netdev, "%s: Receive packet consumed " - "multiple buffers\n", netdev->name); + e_dbg("%s: Receive packet consumed multiple buffers\n", + netdev->name); /* recycle */ buffer_info->skb = skb; goto next_desc; @@ -576,28 +576,26 @@ static void e1000_print_tx_hang(struct e1000_adapter *adapter) unsigned int i = tx_ring->next_to_clean; unsigned int eop = tx_ring->buffer_info[i].next_to_watch; struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop); - struct net_device *netdev = adapter->netdev; /* detected Tx unit hang */ - ndev_err(netdev, - "Detected Tx Unit Hang:\n" - " TDH <%x>\n" - " TDT <%x>\n" - " next_to_use <%x>\n" - " next_to_clean <%x>\n" - "buffer_info[next_to_clean]:\n" - " time_stamp <%lx>\n" - " next_to_watch <%x>\n" - " jiffies <%lx>\n" - " next_to_watch.status <%x>\n", - readl(adapter->hw.hw_addr + tx_ring->head), - readl(adapter->hw.hw_addr + tx_ring->tail), - tx_ring->next_to_use, - tx_ring->next_to_clean, - tx_ring->buffer_info[eop].time_stamp, - eop, - jiffies, - eop_desc->upper.fields.status); + e_err("Detected Tx Unit Hang:\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]:\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + readl(adapter->hw.hw_addr + tx_ring->head), + readl(adapter->hw.hw_addr + tx_ring->tail), + tx_ring->next_to_use, + tx_ring->next_to_clean, + tx_ring->buffer_info[eop].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); } /** @@ -747,8 +745,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, buffer_info->dma = 0; if (!(staterr & E1000_RXD_STAT_EOP)) { - ndev_dbg(netdev, "%s: Packet Split buffers didn't pick " - "up the full packet\n", netdev->name); + e_dbg("%s: Packet Split buffers didn't pick up the " + "full packet\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -761,8 +759,8 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, length = le16_to_cpu(rx_desc->wb.middle.length0); if (!length) { - ndev_dbg(netdev, "%s: Last part of the packet spanning" - " multiple descriptors\n", netdev->name); + e_dbg("%s: Last part of the packet spanning multiple " + "descriptors\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -1011,7 +1009,7 @@ static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter, /* eth type trans needs skb->data to point to something */ if (!pskb_may_pull(skb, ETH_HLEN)) { - ndev_err(netdev, "pskb_may_pull failed.\n"); + e_err("pskb_may_pull failed.\n"); dev_kfree_skb(skb); goto next_desc; } @@ -1251,10 +1249,8 @@ static int e1000_request_irq(struct e1000_adapter *adapter) err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name, netdev); if (err) { - ndev_err(netdev, - "Unable to allocate %s interrupt (return: %d)\n", - adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", - err); + e_err("Unable to allocate %s interrupt (return: %d)\n", + adapter->flags & FLAG_MSI_ENABLED ? "MSI":"INTx", err); if (adapter->flags & FLAG_MSI_ENABLED) pci_disable_msi(adapter->pdev); } @@ -1395,8 +1391,7 @@ int e1000e_setup_tx_resources(struct e1000_adapter *adapter) return 0; err: vfree(tx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -1450,8 +1445,7 @@ err_pages: } err: vfree(rx_ring->buffer_info); - ndev_err(adapter->netdev, - "Unable to allocate memory for the transmit descriptor ring\n"); + e_err("Unable to allocate memory for the transmit descriptor ring\n"); return err; } @@ -2456,7 +2450,7 @@ void e1000e_reset(struct e1000_adapter *adapter) ew32(WUC, 0); if (mac->ops.init_hw(hw)) - ndev_err(adapter->netdev, "Hardware Error\n"); + e_err("Hardware Error\n"); e1000_update_mng_vlan(adapter); @@ -2591,7 +2585,7 @@ static int __devinit e1000_sw_init(struct e1000_adapter *adapter) return 0; err: - ndev_err(netdev, "Unable to allocate memory for queues\n"); + e_err("Unable to allocate memory for queues\n"); kfree(adapter->rx_ring); kfree(adapter->tx_ring); return -ENOMEM; @@ -2917,8 +2911,7 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000); ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus); if (ret_val) - ndev_warn(adapter->netdev, - "Error reading PHY register\n"); + e_warn("Error reading PHY register\n"); } else { /* * Do not read PHY registers if link is not up @@ -2943,18 +2936,16 @@ static void e1000_phy_read_status(struct e1000_adapter *adapter) static void e1000_print_link_info(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; u32 ctrl = er32(CTRL); - ndev_info(netdev, - "Link is Up %d Mbps %s, Flow Control: %s\n", - adapter->link_speed, - (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", - ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); + e_info("Link is Up %d Mbps %s, Flow Control: %s\n", + adapter->link_speed, + (adapter->link_duplex == FULL_DUPLEX) ? + "Full Duplex" : "Half Duplex", + ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? + "RX/TX" : + ((ctrl & E1000_CTRL_RFCE) ? "RX" : + ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); } static bool e1000_has_link(struct e1000_adapter *adapter) @@ -2994,8 +2985,7 @@ static bool e1000_has_link(struct e1000_adapter *adapter) if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) && (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) { /* See e1000_kmrn_lock_loss_workaround_ich8lan() */ - ndev_info(adapter->netdev, - "Gigabit has been disabled, downgrading speed\n"); + e_info("Gigabit has been disabled, downgrading speed\n"); } return link_active; @@ -3096,8 +3086,7 @@ static void e1000_watchdog_task(struct work_struct *work) switch (adapter->link_speed) { case SPEED_10: case SPEED_100: - ndev_info(netdev, - "10/100 speed: disabling TSO\n"); + e_info("10/100 speed: disabling TSO\n"); netdev->features &= ~NETIF_F_TSO; netdev->features &= ~NETIF_F_TSO6; break; @@ -3130,7 +3119,7 @@ static void e1000_watchdog_task(struct work_struct *work) if (netif_carrier_ok(netdev)) { adapter->link_speed = 0; adapter->link_duplex = 0; - ndev_info(netdev, "Link is Down\n"); + e_info("Link is Down\n"); netif_carrier_off(netdev); netif_tx_stop_all_queues(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -3604,8 +3593,7 @@ static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) pull_size = min((unsigned int)4, skb->data_len); if (!__pskb_pull_tail(skb, pull_size)) { - ndev_err(netdev, - "__pskb_pull_tail failed.\n"); + e_err("__pskb_pull_tail failed.\n"); dev_kfree_skb_any(skb); return NETDEV_TX_OK; } @@ -3737,25 +3725,25 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || (max_frame > MAX_JUMBO_FRAME_SIZE)) { - ndev_err(netdev, "Invalid MTU setting\n"); + e_err("Invalid MTU setting\n"); return -EINVAL; } /* Jumbo frame size limits */ if (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) { if (!(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } if (adapter->hw.phy.type == e1000_phy_ife) { - ndev_err(netdev, "Jumbo Frames not supported.\n"); + e_err("Jumbo Frames not supported.\n"); return -EINVAL; } } #define MAX_STD_JUMBO_FRAME_SIZE 9234 if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) { - ndev_err(netdev, "MTU > 9216 not supported.\n"); + e_err("MTU > 9216 not supported.\n"); return -EINVAL; } @@ -3792,8 +3780,7 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; - ndev_info(netdev, "changing MTU from %d to %d\n", - netdev->mtu, new_mtu); + e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu); netdev->mtu = new_mtu; if (netif_running(netdev)) @@ -4175,22 +4162,19 @@ static void e1000_print_device_info(struct e1000_adapter *adapter) u32 pba_num; /* print bus type/speed/width info */ - ndev_info(netdev, "(PCI Express:2.5GB/s:%s) " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - /* bus width */ - ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : - "Width x1"), - /* MAC address */ - netdev->dev_addr[0], netdev->dev_addr[1], - netdev->dev_addr[2], netdev->dev_addr[3], - netdev->dev_addr[4], netdev->dev_addr[5]); - ndev_info(netdev, "Intel(R) PRO/%s Network Connection\n", - (hw->phy.type == e1000_phy_ife) - ? "10/100" : "1000"); + e_info("(PCI Express:2.5GB/s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n", + /* bus width */ + ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" : + "Width x1"), + /* MAC address */ + netdev->dev_addr[0], netdev->dev_addr[1], + netdev->dev_addr[2], netdev->dev_addr[3], + netdev->dev_addr[4], netdev->dev_addr[5]); + e_info("Intel(R) PRO/%s Network Connection\n", + (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000"); e1000e_read_pba_num(hw, &pba_num); - ndev_info(netdev, "MAC: %d, PHY: %d, PBA No: %06x-%03x\n", - hw->mac.type, hw->phy.type, - (pba_num >> 8), (pba_num & 0xff)); + e_info("MAC: %d, PHY: %d, PBA No: %06x-%03x\n", + hw->mac.type, hw->phy.type, (pba_num >> 8), (pba_num & 0xff)); } /** @@ -4366,8 +4350,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, } if (e1000_check_reset_block(&adapter->hw)) - ndev_info(netdev, - "PHY reset is blocked due to SOL/IDER session.\n"); + e_info("PHY reset is blocked due to SOL/IDER session.\n"); netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -4411,7 +4394,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, if (e1000_validate_nvm_checksum(&adapter->hw) >= 0) break; if (i == 2) { - ndev_err(netdev, "The NVM Checksum Is Not Valid\n"); + e_err("The NVM Checksum Is Not Valid\n"); err = -EIO; goto err_eeprom; } @@ -4419,17 +4402,16 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the NVM */ if (e1000e_read_mac_addr(&adapter->hw)) - ndev_err(netdev, "NVM Read Error while reading MAC address\n"); + e_err("NVM Read Error while reading MAC address\n"); memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len); memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); if (!is_valid_ether_addr(netdev->perm_addr)) { - ndev_err(netdev, "Invalid MAC Address: " - "%02x:%02x:%02x:%02x:%02x:%02x\n", - netdev->perm_addr[0], netdev->perm_addr[1], - netdev->perm_addr[2], netdev->perm_addr[3], - netdev->perm_addr[4], netdev->perm_addr[5]); + e_err("Invalid MAC Address: %02x:%02x:%02x:%02x:%02x:%02x\n", + netdev->perm_addr[0], netdev->perm_addr[1], + netdev->perm_addr[2], netdev->perm_addr[3], + netdev->perm_addr[4], netdev->perm_addr[5]); err = -EIO; goto err_eeprom; } diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index a66b92efcf8..8effc3107f9 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -27,6 +27,7 @@ *******************************************************************************/ #include +#include #include "e1000.h" @@ -162,17 +163,16 @@ static int __devinit e1000_validate_option(unsigned int *value, case enable_option: switch (*value) { case OPTION_ENABLED: - ndev_info(adapter->netdev, "%s Enabled\n", opt->name); + e_info("%s Enabled\n", opt->name); return 0; case OPTION_DISABLED: - ndev_info(adapter->netdev, "%s Disabled\n", opt->name); + e_info("%s Disabled\n", opt->name); return 0; } break; case range_option: if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) { - ndev_info(adapter->netdev, - "%s set to %i\n", opt->name, *value); + e_info("%s set to %i\n", opt->name, *value); return 0; } break; @@ -184,8 +184,7 @@ static int __devinit e1000_validate_option(unsigned int *value, ent = &opt->arg.l.p[i]; if (*value == ent->i) { if (ent->str[0] != '\0') - ndev_info(adapter->netdev, "%s\n", - ent->str); + e_info("%s\n", ent->str); return 0; } } @@ -195,8 +194,8 @@ static int __devinit e1000_validate_option(unsigned int *value, BUG(); } - ndev_info(adapter->netdev, "Invalid %s value specified (%i) %s\n", - opt->name, *value, opt->err); + e_info("Invalid %s value specified (%i) %s\n", opt->name, *value, + opt->err); *value = opt->def; return -1; } @@ -213,13 +212,11 @@ static int __devinit e1000_validate_option(unsigned int *value, void __devinit e1000e_check_options(struct e1000_adapter *adapter) { struct e1000_hw *hw = &adapter->hw; - struct net_device *netdev = adapter->netdev; int bd = adapter->bd_number; if (bd >= E1000_MAX_NIC) { - ndev_notice(netdev, - "Warning: no configuration for board #%i\n", bd); - ndev_notice(netdev, "Using defaults for all values\n"); + e_notice("Warning: no configuration for board #%i\n", bd); + e_notice("Using defaults for all values\n"); } { /* Transmit Interrupt Delay */ @@ -313,19 +310,15 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->itr = InterruptThrottleRate[bd]; switch (adapter->itr) { case 0: - ndev_info(netdev, "%s turned off\n", - opt.name); + e_info("%s turned off\n", opt.name); break; case 1: - ndev_info(netdev, - "%s set to dynamic mode\n", - opt.name); + e_info("%s set to dynamic mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; break; case 3: - ndev_info(netdev, - "%s set to dynamic conservative mode\n", + e_info("%s set to dynamic conservative mode\n", opt.name); adapter->itr_setting = adapter->itr; adapter->itr = 20000; -- 2.41.1