From 340f364c7b604b4b0513ba0d610d1ed528400f39 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 1 Dec 2008 13:15:53 -0800 Subject: [PATCH] move drivers/i2c/chips/isp1301-omap.c This moves the isp1301-omap driver from the drivers/i2c/chips directory (which will be shrinking) into a new drivers/usb/otg directory (which will grow, with more drivers and utilities). Note that OTG infrastructure needs to be initialized before either host or peripheral side USB support, and may be needed before for pure host or pure peripheral configurations. Signed-off-by: David Brownell Acked-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman Signed-off-by: Tony Lindgren --- drivers/Makefile | 1 + drivers/i2c/chips/Kconfig | 12 ------- drivers/i2c/chips/Makefile | 1 - drivers/usb/Kconfig | 2 ++ drivers/usb/otg/Kconfig | 31 +++++++++++++++++++ drivers/usb/otg/Makefile | 8 +++++ drivers/{i2c/chips => usb/otg}/isp1301_omap.c | 0 7 files changed, 42 insertions(+), 13 deletions(-) create mode 100644 drivers/usb/otg/Kconfig create mode 100644 drivers/usb/otg/Makefile rename drivers/{i2c/chips => usb/otg}/isp1301_omap.c (100%) diff --git a/drivers/Makefile b/drivers/Makefile index 022029badb1..2b6949f3f58 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/ obj-$(CONFIG_PARIDE) += block/paride/ obj-$(CONFIG_TC) += tc/ obj-$(CONFIG_UWB) += uwb/ +obj-$(CONFIG_USB_OTG_UTILS) += usb/otg/ obj-$(CONFIG_USB) += usb/ obj-$(CONFIG_USB_MUSB_HDRC) += usb/musb/ obj-$(CONFIG_PCI) += usb/ diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 7404647adc2..19424693fa9 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -114,18 +114,6 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. -config ISP1301_OMAP - tristate "Philips ISP1301 with OMAP OTG" - depends on ARCH_OMAP_OTG - help - If you say yes here you get support for the Philips ISP1301 - USB-On-The-Go transceiver working with the OMAP OTG controller. - The ISP1301 is used in products including H2 and H3 development - boards for Texas Instruments OMAP processors. - - This driver can also be built as a module. If so, the module - will be called isp1301_omap. - config TPS65010 tristate "TPS6501x Power Management chips" depends on GPIOLIB diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 7076c30221a..43ab153296c 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o obj-$(CONFIG_PCF8575) += pcf8575.o obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o -obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TPS65010) += tps65010.o obj-$(CONFIG_MENELAUS) += menelaus.o obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index fa28fb6a6bd..a1afd505dab 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -151,4 +151,6 @@ source "drivers/usb/atm/Kconfig" source "drivers/usb/gadget/Kconfig" +source "drivers/usb/otg/Kconfig" + endif # USB_SUPPORT diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig new file mode 100644 index 00000000000..860342902bb --- /dev/null +++ b/drivers/usb/otg/Kconfig @@ -0,0 +1,31 @@ +# +# USB OTG infrastructure may be needed for peripheral-only, host-only, +# or OTG-capable configurations when OTG transceivers or controllers +# are used. +# + +comment "OTG and related infrastructure" + +if USB || USB_GADGET + +config USB_OTG_UTILS + bool + help + Select this to make sure the build includes objects from + the OTG infrastructure directory. + +config ISP1301_OMAP + tristate "Philips ISP1301 with OMAP OTG" + depends on I2C && ARCH_OMAP_OTG + select USB_OTG_UTILS + help + If you say yes here you get support for the Philips ISP1301 + USB-On-The-Go transceiver working with the OMAP OTG controller. + The ISP1301 is a full speed USB transceiver which is used in + products including H2, H3, and H4 development boards for Texas + Instruments OMAP processors. + + This driver can also be built as a module. If so, the module + will be called isp1301_omap. + +endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile new file mode 100644 index 00000000000..483816685d0 --- /dev/null +++ b/drivers/usb/otg/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o + +ifeq ($(CONFIG_USB_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +else ifeq ($(CONFIG_USB_GADGET_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif + diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c similarity index 100% rename from drivers/i2c/chips/isp1301_omap.c rename to drivers/usb/otg/isp1301_omap.c -- 2.41.1