From 2c5bd01f8f5d7c655d9d1aa60b696d980947e3be Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 23 Nov 2005 17:59:04 +1100 Subject: [PATCH] [PATCH] powerpc: convert macio_asic to use prom_parse Converts the macio_asic core to use the new OF parsing routines instead of relying on the pre-parsed values in struct device_node. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- drivers/macintosh/macio_asic.c | 234 ++++++++++++++++++++------------- 1 file changed, 140 insertions(+), 94 deletions(-) diff --git a/drivers/macintosh/macio_asic.c b/drivers/macintosh/macio_asic.c index 228e1852a83..f14c744a94e 100644 --- a/drivers/macintosh/macio_asic.c +++ b/drivers/macintosh/macio_asic.c @@ -3,6 +3,13 @@ * a MacIO ASIC. Interface to new driver model mostly * stolen from the PCI version. * + * Copyright (C) 2005 Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * * TODO: * * - Don't probe below media bay by default, but instead provide @@ -218,12 +225,14 @@ postcore_initcall(macio_bus_driver_init); /** - * macio_release_dev - free a macio device structure when all users of it are finished. + * macio_release_dev - free a macio device structure when all users of it are + * finished. * @dev: device that's been disconnected * - * Will be called only by the device core when all users of this macio device are - * done. This currently means never as we don't hot remove any macio device yet, - * though that will happen with mediabay based devices in a later implementation. + * Will be called only by the device core when all users of this macio device + * are done. This currently means never as we don't hot remove any macio + * device yet, though that will happen with mediabay based devices in a later + * implementation. */ static void macio_release_dev(struct device *dev) { @@ -242,7 +251,8 @@ static void macio_release_dev(struct device *dev) * If this routine returns non-null, then the resource is completely * skipped. */ -static int macio_resource_quirks(struct device_node *np, struct resource *res, int index) +static int macio_resource_quirks(struct device_node *np, struct resource *res, + int index) { if (res->flags & IORESOURCE_MEM) { /* Grand Central has too large resource 0 on some machines */ @@ -258,12 +268,15 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i np->addrs[index].size = 0x100; res->end = res->start + 0xff; } - /* ESCC parent eats child resources. We could have added a level of hierarchy, - * but I don't really feel the need for it */ + /* ESCC parent eats child resources. We could have added a + * level of hierarchy, but I don't really feel the need + * for it + */ if (!strcmp(np->name, "escc")) return 1; /* ESCC has bogus resources >= 3 */ - if (index >= 3 && !(strcmp(np->name, "ch-a") && strcmp(np->name, "ch-b"))) + if (index >= 3 && !(strcmp(np->name, "ch-a") && + strcmp(np->name, "ch-b"))) return 1; /* Media bay has too many resources, keep only first one */ if (index > 0 && !strcmp(np->name, "media-bay")) @@ -285,6 +298,71 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i } +static void macio_setup_interrupts(struct macio_dev *dev) +{ + struct device_node *np = dev->ofdev.node; + int i,j; + + /* For now, we use pre-parsed entries in the device-tree for + * interrupt routing and addresses, but we should change that + * to dynamically parsed entries and so get rid of most of the + * clutter in struct device_node + */ + for (i = j = 0; i < np->n_intrs; i++) { + struct resource *res = &dev->interrupt[j]; + + if (j >= MACIO_DEV_COUNT_IRQS) + break; + res->start = np->intrs[i].line; + res->flags = IORESOURCE_IO; + if (np->intrs[j].sense) + res->flags |= IORESOURCE_IRQ_LOWLEVEL; + else + res->flags |= IORESOURCE_IRQ_HIGHEDGE; + res->name = dev->ofdev.dev.bus_id; + if (macio_resource_quirks(np, res, i)) + memset(res, 0, sizeof(struct resource)); + else + j++; + } + dev->n_interrupts = j; +} + +static void macio_setup_resources(struct macio_dev *dev, + struct resource *parent_res) +{ + struct device_node *np = dev->ofdev.node; + u32 *addr; + u64 size; + int index; + + for (index = 0; (addr = of_get_address(np, index, &size)) != NULL; + index++) { + struct resource *res = &dev->resource[index]; + if (index >= MACIO_DEV_COUNT_RESOURCES) + break; + res->start = of_translate_address(np, addr); + res->end = res->start + (unsigned long)size - 1; + res->flags = IORESOURCE_MEM; + res->name = dev->ofdev.dev.bus_id; + + if (macio_resource_quirks(np, res, index)) { + memset(res, 0, sizeof(struct resource)); + continue; + } + /* Currently, we consider failure as harmless, this may + * change in the future, once I've found all the device + * tree bugs in older machines & worked around them + */ + if (insert_resource(parent_res, res)) { + printk(KERN_WARNING "Can't request resource " + "%d for MacIO device %s\n", + index, dev->ofdev.dev.bus_id); + } + } + dev->n_resources = index; +} + /** * macio_add_one_device - Add one device from OF node to the device tree * @chip: pointer to the macio_chip holding the device @@ -294,12 +372,13 @@ static int macio_resource_quirks(struct device_node *np, struct resource *res, i * When media-bay is changed to hotswap drivers, this function will * be exposed to the bay driver some way... */ -static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct device *parent, - struct device_node *np, struct macio_dev *in_bay, +static struct macio_dev * macio_add_one_device(struct macio_chip *chip, + struct device *parent, + struct device_node *np, + struct macio_dev *in_bay, struct resource *parent_res) { struct macio_dev *dev; - int i, j; u32 *reg; if (np == NULL) @@ -326,7 +405,8 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d /* MacIO itself has a different reg, we use it's PCI base */ if (np == chip->of_node) { - sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", chip->lbus.index, + sprintf(dev->ofdev.dev.bus_id, "%1d.%08lx:%.*s", + chip->lbus.index, #ifdef CONFIG_PCI pci_resource_start(chip->lbus.pdev, 0), #else @@ -335,57 +415,16 @@ static struct macio_dev * macio_add_one_device(struct macio_chip *chip, struct d MAX_NODE_NAME_SIZE, np->name); } else { reg = (u32 *)get_property(np, "reg", NULL); - sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", chip->lbus.index, + sprintf(dev->ofdev.dev.bus_id, "%1d.%08x:%.*s", + chip->lbus.index, reg ? *reg : 0, MAX_NODE_NAME_SIZE, np->name); } - /* For now, we use pre-parsed entries in the device-tree for - * interrupt routing and addresses, but we should change that - * to dynamically parsed entries and so get rid of most of the - * clutter in struct device_node - */ - for (i = j = 0; i < np->n_intrs; i++) { - struct resource *res = &dev->interrupt[j]; - - if (j >= MACIO_DEV_COUNT_IRQS) - break; - res->start = np->intrs[i].line; - res->flags = IORESOURCE_IO; - if (np->intrs[j].sense) - res->flags |= IORESOURCE_IRQ_LOWLEVEL; - else - res->flags |= IORESOURCE_IRQ_HIGHEDGE; - res->name = dev->ofdev.dev.bus_id; - if (macio_resource_quirks(np, res, i)) - memset(res, 0, sizeof(struct resource)); - else - j++; - } - dev->n_interrupts = j; - for (i = j = 0; i < np->n_addrs; i++) { - struct resource *res = &dev->resource[j]; - - if (j >= MACIO_DEV_COUNT_RESOURCES) - break; - res->start = np->addrs[i].address; - res->end = np->addrs[i].address + np->addrs[i].size - 1; - res->flags = IORESOURCE_MEM; - res->name = dev->ofdev.dev.bus_id; - if (macio_resource_quirks(np, res, i)) - memset(res, 0, sizeof(struct resource)); - else { - j++; - /* Currently, we consider failure as harmless, this may - * change in the future, once I've found all the device - * tree bugs in older machines & worked around them - */ - if (insert_resource(parent_res, res)) - printk(KERN_WARNING "Can't request resource %d for MacIO" - " device %s\n", i, dev->ofdev.dev.bus_id); - } - } - dev->n_resources = j; + /* Setup interrupts & resources */ + macio_setup_interrupts(dev); + macio_setup_resources(dev, parent_res); + /* Register with core */ if (of_device_register(&dev->ofdev) != 0) { printk(KERN_DEBUG"macio: device registration error for %s!\n", dev->ofdev.dev.bus_id); @@ -442,36 +481,42 @@ static void macio_pci_add_devices(struct macio_chip *chip) /* First scan 1st level */ for (np = NULL; (np = of_get_next_child(pnode, np)) != NULL;) { - if (!macio_skip_device(np)) { - of_node_get(np); - mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, root_res); - if (mdev == NULL) - of_node_put(np); - else if (strncmp(np->name, "media-bay", 9) == 0) - mbdev = mdev; - else if (strncmp(np->name, "escc", 4) == 0) - sdev = mdev; - } + if (macio_skip_device(np)) + continue; + of_node_get(np); + mdev = macio_add_one_device(chip, &rdev->ofdev.dev, np, NULL, + root_res); + if (mdev == NULL) + of_node_put(np); + else if (strncmp(np->name, "media-bay", 9) == 0) + mbdev = mdev; + else if (strncmp(np->name, "escc", 4) == 0) + sdev = mdev; } /* Add media bay devices if any */ if (mbdev) - for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) != NULL;) - if (!macio_skip_device(np)) { - of_node_get(np); - if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, mbdev, - root_res) == NULL) - of_node_put(np); - } + for (np = NULL; (np = of_get_next_child(mbdev->ofdev.node, np)) + != NULL;) { + if (macio_skip_device(np)) + continue; + of_node_get(np); + if (macio_add_one_device(chip, &mbdev->ofdev.dev, np, + mbdev, root_res) == NULL) + of_node_put(np); + } + /* Add serial ports if any */ if (sdev) { - for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) != NULL;) - if (!macio_skip_device(np)) { - of_node_get(np); - if (macio_add_one_device(chip, &sdev->ofdev.dev, np, NULL, - root_res) == NULL) - of_node_put(np); - } + for (np = NULL; (np = of_get_next_child(sdev->ofdev.node, np)) + != NULL;) { + if (macio_skip_device(np)) + continue; + of_node_get(np); + if (macio_add_one_device(chip, &sdev->ofdev.dev, np, + NULL, root_res) == NULL) + of_node_put(np); + } } } @@ -519,7 +564,8 @@ void macio_unregister_driver(struct macio_driver *drv) * Returns 0 on success, or %EBUSY on error. A warning * message is also printed on failure. */ -int macio_request_resource(struct macio_dev *dev, int resource_no, const char *name) +int macio_request_resource(struct macio_dev *dev, int resource_no, + const char *name) { if (macio_resource_len(dev, resource_no) == 0) return 0; @@ -606,20 +652,20 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi if (ent->vendor != PCI_VENDOR_ID_APPLE) return -ENODEV; - /* Note regarding refcounting: We assume pci_device_to_OF_node() is ported - * to new OF APIs and returns a node with refcount incremented. This isn't - * the case today, but on the other hand ppc32 doesn't do refcounting. This - * will have to be fixed when going to ppc64. --BenH. + /* Note regarding refcounting: We assume pci_device_to_OF_node() is + * ported to new OF APIs and returns a node with refcount incremented. */ np = pci_device_to_OF_node(pdev); if (np == NULL) return -ENODEV; - /* This assumption is wrong, fix that here for now until I fix the arch */ + /* The above assumption is wrong !!! + * fix that here for now until I fix the arch code + */ of_node_get(np); - /* We also assume that pmac_feature will have done a get() on nodes stored - * in the macio chips array + /* We also assume that pmac_feature will have done a get() on nodes + * stored in the macio chips array */ chip = macio_find(np, macio_unknown); of_node_put(np); @@ -639,9 +685,9 @@ static int __devinit macio_pci_probe(struct pci_dev *pdev, const struct pci_devi /* * HACK ALERT: The WallStreet PowerBook and some OHare based machines - * have 2 macio ASICs. I must probe the "main" one first or IDE ordering - * will be incorrect. So I put on "hold" the second one since it seem to - * appear first on PCI + * have 2 macio ASICs. I must probe the "main" one first or IDE + * ordering will be incorrect. So I put on "hold" the second one since + * it seem to appear first on PCI */ if (chip->type == macio_gatwick || chip->type == macio_ohareII) if (macio_chips[0].lbus.pdev == NULL) { -- 2.41.1