From 28796eaf806502b9bd86cbacf8edbc14c80c14b0 Mon Sep 17 00:00:00 2001 From: Ian Molton Date: Sat, 17 Jan 2009 15:11:06 +0000 Subject: [PATCH] ASoC: machine support for Toshiba e740 PDA This patch provides suupport for the wm9705 AC97 codec on the Toshiba e740. Note: The e740 has a hard headphone switch that turns the speaker off and is not software detectable or controlable. Also both headphone and speaker amps share a common output enable. Signed-off-by: Ian Molton Signed-off-by: Mark Brown --- arch/arm/mach-pxa/e740.c | 5 + arch/arm/mach-pxa/include/mach/eseries-gpio.h | 5 + sound/soc/pxa/Kconfig | 9 + sound/soc/pxa/Makefile | 2 + sound/soc/pxa/e740_wm9705.c | 213 ++++++++++++++++++ 5 files changed, 234 insertions(+) create mode 100644 sound/soc/pxa/e740_wm9705.c diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 6d48e00f4f0..a6fff782e7a 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -135,6 +135,11 @@ static unsigned long e740_pin_config[] __initdata = { /* IrDA */ GPIO38_GPIO | MFP_LPM_DRIVE_HIGH, + /* Audio power control */ + GPIO16_GPIO, /* AC97 codec AVDD2 supply (analogue power) */ + GPIO40_GPIO, /* Mic amp power */ + GPIO41_GPIO, /* Headphone amp power */ + /* PC Card */ GPIO8_GPIO, /* CD0 */ GPIO44_GPIO, /* CD1 */ diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h index 6d6e4d8fa4c..f3e5509820d 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h @@ -45,6 +45,11 @@ /* e7xx IrDA power control */ #define GPIO_E7XX_IR_OFF 38 +/* e740 audio control GPIOs */ +#define GPIO_E740_WM9705_nAVDD2 16 +#define GPIO_E740_MIC_ON 40 +#define GPIO_E740_AMP_ON 41 + /* e750 audio control GPIOs */ #define GPIO_E750_HP_AMP_OFF 4 #define GPIO_E750_SPK_AMP_OFF 7 diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index b9b1a3f5d67..958ac3fe15d 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -61,6 +61,15 @@ config SND_PXA2XX_SOC_TOSA Say Y if you want to add support for SoC audio on Sharp Zaurus SL-C6000x models (Tosa). +config SND_PXA2XX_SOC_E740 + tristate "SoC AC97 Audio support for e740" + depends on SND_PXA2XX_SOC && MACH_E740 + select SND_SOC_WM9705 + select SND_PXA2XX_SOC_AC97 + help + Say Y if you want to add support for SoC audio on the + toshiba e740 PDA + config SND_PXA2XX_SOC_E750 tristate "SoC AC97 Audio support for e750" depends on SND_PXA2XX_SOC && MACH_E750 diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index c7d4cceeed9..97a51a8c936 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o snd-soc-corgi-objs := corgi.o snd-soc-poodle-objs := poodle.o snd-soc-tosa-objs := tosa.o +snd-soc-e740-objs := e740_wm9705.o snd-soc-e750-objs := e750_wm9705.o snd-soc-e800-objs := e800_wm9712.o snd-soc-spitz-objs := spitz.o @@ -23,6 +24,7 @@ snd-soc-zylonite-objs := zylonite.o obj-$(CONFIG_SND_PXA2XX_SOC_CORGI) += snd-soc-corgi.o obj-$(CONFIG_SND_PXA2XX_SOC_POODLE) += snd-soc-poodle.o obj-$(CONFIG_SND_PXA2XX_SOC_TOSA) += snd-soc-tosa.o +obj-$(CONFIG_SND_PXA2XX_SOC_E740) += snd-soc-e740.o obj-$(CONFIG_SND_PXA2XX_SOC_E750) += snd-soc-e750.o obj-$(CONFIG_SND_PXA2XX_SOC_E800) += snd-soc-e800.o obj-$(CONFIG_SND_PXA2XX_SOC_SPITZ) += snd-soc-spitz.o diff --git a/sound/soc/pxa/e740_wm9705.c b/sound/soc/pxa/e740_wm9705.c new file mode 100644 index 00000000000..ac361765173 --- /dev/null +++ b/sound/soc/pxa/e740_wm9705.c @@ -0,0 +1,213 @@ +/* + * e740-wm9705.c -- SoC audio for e740 + * + * Copyright 2007 (c) Ian Molton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 ONLY. + * + */ + +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#include "../codecs/wm9705.h" +#include "pxa2xx-pcm.h" +#include "pxa2xx-ac97.h" + + +#define E740_AUDIO_OUT 1 +#define E740_AUDIO_IN 2 + +static int e740_audio_power; + +static void e740_sync_audio_power(int status) +{ + gpio_set_value(GPIO_E740_WM9705_nAVDD2, !status); + gpio_set_value(GPIO_E740_AMP_ON, (status & E740_AUDIO_OUT) ? 1 : 0); + gpio_set_value(GPIO_E740_MIC_ON, (status & E740_AUDIO_IN) ? 1 : 0); +} + +static int e740_mic_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_IN; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_IN; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static int e740_output_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + if (event & SND_SOC_DAPM_PRE_PMU) + e740_audio_power |= E740_AUDIO_OUT; + else if (event & SND_SOC_DAPM_POST_PMD) + e740_audio_power &= ~E740_AUDIO_OUT; + + e740_sync_audio_power(e740_audio_power); + + return 0; +} + +static const struct snd_soc_dapm_widget e740_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone Jack", NULL), + SND_SOC_DAPM_SPK("Speaker", NULL), + SND_SOC_DAPM_MIC("Mic (Internal)", NULL), + SND_SOC_DAPM_PGA_E("Output Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_output_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_E("Mic Amp", SND_SOC_NOPM, 0, 0, NULL, 0, + e740_mic_amp_event, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route audio_map[] = { + {"Output Amp", NULL, "LOUT"}, + {"Output Amp", NULL, "ROUT"}, + {"Output Amp", NULL, "MONOOUT"}, + + {"Speaker", NULL, "Output Amp"}, + {"Headphone Jack", NULL, "Output Amp"}, + + {"MIC1", NULL, "Mic Amp"}, + {"Mic Amp", NULL, "Mic (Internal)"}, +}; + +static int e740_ac97_init(struct snd_soc_codec *codec) +{ + snd_soc_dapm_nc_pin(codec, "HPOUTL"); + snd_soc_dapm_nc_pin(codec, "HPOUTR"); + snd_soc_dapm_nc_pin(codec, "PHONE"); + snd_soc_dapm_nc_pin(codec, "LINEINL"); + snd_soc_dapm_nc_pin(codec, "LINEINR"); + snd_soc_dapm_nc_pin(codec, "CDINL"); + snd_soc_dapm_nc_pin(codec, "CDINR"); + snd_soc_dapm_nc_pin(codec, "PCBEEP"); + snd_soc_dapm_nc_pin(codec, "MIC2"); + + snd_soc_dapm_new_controls(codec, e740_dapm_widgets, + ARRAY_SIZE(e740_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map)); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link e740_dai[] = { + { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_HIFI], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_HIFI], + .init = e740_ac97_init, + }, + { + .name = "AC97 Aux", + .stream_name = "AC97 Aux", + .cpu_dai = &pxa_ac97_dai[PXA2XX_DAI_AC97_AUX], + .codec_dai = &wm9705_dai[WM9705_DAI_AC97_AUX], + }, +}; + +static struct snd_soc_card e740 = { + .name = "Toshiba e740", + .platform = &pxa2xx_soc_platform, + .dai_link = e740_dai, + .num_links = ARRAY_SIZE(e740_dai), +}; + +static struct snd_soc_device e740_snd_devdata = { + .card = &e740, + .codec_dev = &soc_codec_dev_wm9705, +}; + +static struct platform_device *e740_snd_device; + +static int __init e740_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + ret = gpio_request(GPIO_E740_MIC_ON, "Mic amp"); + if (ret) + return ret; + + ret = gpio_request(GPIO_E740_AMP_ON, "Output amp"); + if (ret) + goto free_mic_amp_gpio; + + ret = gpio_request(GPIO_E740_WM9705_nAVDD2, "Audio power"); + if (ret) + goto free_op_amp_gpio; + + /* Disable audio */ + ret = gpio_direction_output(GPIO_E740_MIC_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_AMP_ON, 0); + if (ret) + goto free_apwr_gpio; + ret = gpio_direction_output(GPIO_E740_WM9705_nAVDD2, 1); + if (ret) + goto free_apwr_gpio; + + e740_snd_device = platform_device_alloc("soc-audio", -1); + if (!e740_snd_device) { + ret = -ENOMEM; + goto free_apwr_gpio; + } + + platform_set_drvdata(e740_snd_device, &e740_snd_devdata); + e740_snd_devdata.dev = &e740_snd_device->dev; + ret = platform_device_add(e740_snd_device); + + if (!ret) + return 0; + +/* Fail gracefully */ + platform_device_put(e740_snd_device); +free_apwr_gpio: + gpio_free(GPIO_E740_WM9705_nAVDD2); +free_op_amp_gpio: + gpio_free(GPIO_E740_AMP_ON); +free_mic_amp_gpio: + gpio_free(GPIO_E740_MIC_ON); + + return ret; +} + +static void __exit e740_exit(void) +{ + platform_device_unregister(e740_snd_device); +} + +module_init(e740_init); +module_exit(e740_exit); + +/* Module information */ +MODULE_AUTHOR("Ian Molton "); +MODULE_DESCRIPTION("ALSA SoC driver for e740"); +MODULE_LICENSE("GPL v2"); -- 2.41.1