From 27898988174bb211fd962ea73b9c6dc09f888705 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 10 Jul 2008 22:10:55 -0500 Subject: [PATCH] [SCSI] fusion: default MSI to disabled for SPI and FC controllers There's a fault on the FC controllers that makes them not respond correctly to MSI. The SPI controllers are fine, but are likely to be onboard on older motherboards which don't handle MSI correctly, so default both these cases to disabled. Enable by setting the module parameter mpt_msi_enable=1. For the SAS case, enable MSI by default, but it can be disabled by setting the module parameter mpt_msi_enable=0. Cc: "Prakash, Sathya" Signed-off-by: James Bottomley --- drivers/message/fusion/mptbase.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c index db3c892f87f..d40d6d15ae2 100644 --- a/drivers/message/fusion/mptbase.c +++ b/drivers/message/fusion/mptbase.c @@ -1686,9 +1686,14 @@ mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id) ioc->bus_type = SAS; } - if (ioc->bus_type == SAS && mpt_msi_enable == -1) - ioc->msi_enable = 1; - else + if (mpt_msi_enable == -1) { + /* Enable on SAS, disable on FC and SPI */ + if (ioc->bus_type == SAS) + ioc->msi_enable = 1; + else + ioc->msi_enable = 0; + } else + /* follow flag: 0 - disable; 1 - enable */ ioc->msi_enable = mpt_msi_enable; if (ioc->errata_flag_1064) -- 2.41.1