From 2572c149a2f52232ce690ddb9c6fd0c90ffd61cd Mon Sep 17 00:00:00 2001 From: Eliezer Tamir Date: Sun, 23 Mar 2008 03:07:45 -0700 Subject: [PATCH] BNX2X: prevent ethtool from setting port type On 10GBaseT boards setting the type to TP will cause the driver to try to configure 1GBaseT. Since there are currently no boards that support setting of the port type, disable this for now. Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller --- drivers/net/bnx2x.c | 36 ++---------------------------------- 1 file changed, 2 insertions(+), 34 deletions(-) diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 8af142ccf37..de32b3fba32 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -63,8 +63,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.40.22" -#define DRV_MODULE_RELDATE "2007/11/27" +#define DRV_MODULE_VERSION "1.42.3" +#define DRV_MODULE_RELDATE "2008/3/9" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung. */ @@ -8008,38 +8008,6 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->duplex, cmd->port, cmd->phy_address, cmd->transceiver, cmd->autoneg, cmd->maxtxpkt, cmd->maxrxpkt); - switch (cmd->port) { - case PORT_TP: - if (!(bp->supported & SUPPORTED_TP)) { - DP(NETIF_MSG_LINK, "TP not supported\n"); - return -EINVAL; - } - - if (bp->phy_flags & PHY_XGXS_FLAG) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_1G); - bnx2x_phy_deassert(bp); - } - break; - - case PORT_FIBRE: - if (!(bp->supported & SUPPORTED_FIBRE)) { - DP(NETIF_MSG_LINK, "FIBRE not supported\n"); - return -EINVAL; - } - - if (!(bp->phy_flags & PHY_XGXS_FLAG)) { - bnx2x_link_reset(bp); - bnx2x_link_settings_supported(bp, SWITCH_CFG_10G); - bnx2x_phy_deassert(bp); - } - break; - - default: - DP(NETIF_MSG_LINK, "Unknown port type\n"); - return -EINVAL; - } - if (cmd->autoneg == AUTONEG_ENABLE) { if (!(bp->supported & SUPPORTED_Autoneg)) { DP(NETIF_MSG_LINK, "Aotoneg not supported\n"); -- 2.41.1