From 239cd34327d12e84f5528caa7b11c9e651372c39 Mon Sep 17 00:00:00 2001 From: Michael Chan Date: Wed, 17 Oct 2007 19:26:15 -0700 Subject: [PATCH] [BNX2]: Fix Serdes WoL bug. The bug is in the code in bnx2_set_power_state() that assumes copper devices when setting up WoL. This is no longer true after adding WoL support for Serdes devices. Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/bnx2.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 78ed633ceb8..2a79ffc4eea 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -3079,14 +3079,18 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) autoneg = bp->autoneg; advertising = bp->advertising; - bp->autoneg = AUTONEG_SPEED; - bp->advertising = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_Autoneg; + if (bp->phy_port == PORT_TP) { + bp->autoneg = AUTONEG_SPEED; + bp->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + } - bnx2_setup_copper_phy(bp); + spin_lock_bh(&bp->phy_lock); + bnx2_setup_phy(bp, bp->phy_port); + spin_unlock_bh(&bp->phy_lock); bp->autoneg = autoneg; bp->advertising = advertising; @@ -3097,10 +3101,16 @@ bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) /* Enable port mode. */ val &= ~BNX2_EMAC_MODE_PORT; - val |= BNX2_EMAC_MODE_PORT_MII | - BNX2_EMAC_MODE_MPKT_RCVD | + val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD | BNX2_EMAC_MODE_MPKT; + if (bp->phy_port == PORT_TP) + val |= BNX2_EMAC_MODE_PORT_MII; + else { + val |= BNX2_EMAC_MODE_PORT_GMII; + if (bp->line_speed == SPEED_2500) + val |= BNX2_EMAC_MODE_25G_MODE; + } REG_WR(bp, BNX2_EMAC_MODE, val); -- 2.41.1