From 2368086344c3d67b0f4aecac39d620fb9b8795c3 Mon Sep 17 00:00:00 2001 From: Hirokazu Takata Date: Tue, 21 Jun 2005 17:16:10 -0700 Subject: [PATCH] [PATCH] m32r: Support M3A-2170(Mappi-III) platform This patchset is for supporting a new m32r platform, M3A-2170(Mappi-III) evaluation board. An M32R chip multiprocessor is equipped on the board. http://http://www.linux-m32r.org/eng/platform/platform.html * arch/m32r/Kconfig: Support Mappi-III platform. * arch/m32r/kernel/Makefile: ditto. * arch/m32r/kernel/io_mappi3.c: ditto. * arch/m32r/kernel/setup.c: ditto. * arch/m32r/kernel/setup_mappi3.c: ditto. * include/asm-m32r/m32102.h: ditto. * include/asm-m32r/m32r.h: ditto. * include/asm-m32r/mappi3/mappi3_pld.h: ditto. * include/asm-m32r/ide.h: CF support for Mappi-III. * arch/m32r/kernel/setup_mappi3.c: ditto. * arch/m32r/mappi3/defconfig.smp: A default config file for Mappi-III. * arch/m32r/mappi3/dot.gdbinit: A default .gdbinit file for Mappi-III. * arch/m32r/boot/compressed/m32r_sio.c: Modified for Mappi-III - At boot time, m32r-g00ff bootloader makes MMU off for Mappi-III, on the contrary it makes MMU on for Mappi-II. * arch/m32r/kernel/io_mappi2.c: Update comments. * arch/m32r/kernel/setup_mappi2.c: ditto. Signed-off-by: Mamoru Sakugawa Signed-off-by: Hirokazu Takata Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/m32r/Kconfig | 7 +- arch/m32r/boot/compressed/m32r_sio.c | 19 +- arch/m32r/kernel/Makefile | 2 +- arch/m32r/kernel/io_m32700ut.c | 92 +--- arch/m32r/kernel/io_mappi.c | 74 +-- arch/m32r/kernel/io_mappi2.c | 92 +--- arch/m32r/kernel/io_mappi3.c | 378 ++++++++++++++ arch/m32r/kernel/io_oaks32r.c | 36 +- arch/m32r/kernel/io_opsput.c | 79 +-- arch/m32r/kernel/io_usrv.c | 51 +- arch/m32r/kernel/setup.c | 2 + arch/m32r/kernel/setup_mappi2.c | 6 +- arch/m32r/kernel/setup_mappi3.c | 208 ++++++++ arch/m32r/mappi3/defconfig.smp | 751 +++++++++++++++++++++++++++ arch/m32r/mappi3/dot.gdbinit | 224 ++++++++ include/asm-m32r/ide.h | 2 +- include/asm-m32r/m32102.h | 1 + include/asm-m32r/m32r.h | 4 + include/asm-m32r/mappi3/mappi3_pld.h | 143 +++++ 19 files changed, 1785 insertions(+), 386 deletions(-) create mode 100644 arch/m32r/kernel/io_mappi3.c create mode 100644 arch/m32r/kernel/setup_mappi3.c create mode 100644 arch/m32r/mappi3/defconfig.smp create mode 100644 arch/m32r/mappi3/dot.gdbinit create mode 100644 include/asm-m32r/mappi3/mappi3_pld.h diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 0d90ea58a0c..64c133344af 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -78,6 +78,9 @@ config PLAT_OAKS32R config PLAT_MAPPI2 bool "Mappi-II(M3A-ZA36/M3A-ZA52)" +config PLAT_MAPPI3 + bool "Mappi-III(M3A-2170)" + endchoice choice @@ -134,6 +137,7 @@ config BUS_CLOCK int "Bus Clock [Hz] (integer)" default "70000000" if PLAT_MAPPI default "25000000" if PLAT_USRV + default "50000000" if PLAT_MAPPI3 default "50000000" if PLAT_M32700UT default "50000000" if PLAT_OPSPUT default "33333333" if PLAT_OAKS32R @@ -149,7 +153,7 @@ config CPU_LITTLE_ENDIAN config MEMORY_START hex "Physical memory start address (hex)" - default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 + default "08000000" if PLAT_MAPPI || PLAT_MAPPI2 || PLAT_MAPPI3 default "08000000" if PLAT_USRV default "08000000" if PLAT_M32700UT default "08000000" if PLAT_OPSPUT @@ -157,6 +161,7 @@ config MEMORY_START config MEMORY_SIZE hex "Physical memory size (hex)" + default "08000000" if PLAT_MAPPI3 default "04000000" if PLAT_MAPPI || PLAT_MAPPI2 default "02000000" if PLAT_USRV default "01000000" if PLAT_M32700UT diff --git a/arch/m32r/boot/compressed/m32r_sio.c b/arch/m32r/boot/compressed/m32r_sio.c index bad5475eff9..8f9a57271f8 100644 --- a/arch/m32r/boot/compressed/m32r_sio.c +++ b/arch/m32r/boot/compressed/m32r_sio.c @@ -6,6 +6,7 @@ */ #include +#include static void putc(char c); @@ -38,16 +39,17 @@ static int puts(const char *s) static void putc(char c) { - - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); if (c == '\n') { *BOOT_SIO0TXB = '\r'; - while ((*BOOT_SIO0STS & 0x3) != 0x3) ; + while ((*BOOT_SIO0STS & 0x3) != 0x3) + cpu_relax(); } *BOOT_SIO0TXB = c; } -#else /* defined(CONFIG_PLAT_M32700UT_Alpha) || defined(CONFIG_PLAT_M32700UT) */ -#ifdef CONFIG_MMU +#else /* !(CONFIG_PLAT_M32700UT_Alpha) && !(CONFIG_PLAT_M32700UT) */ +#if defined(CONFIG_PLAT_MAPPI2) #define SIO0STS (volatile unsigned short *)(0xa0efd000 + 14) #define SIO0TXB (volatile unsigned short *)(0xa0efd000 + 30) #else @@ -57,11 +59,12 @@ static void putc(char c) static void putc(char c) { - - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); if (c == '\n') { *SIO0TXB = '\r'; - while ((*SIO0STS & 0x1) == 0) ; + while ((*SIO0STS & 0x1) == 0) + cpu_relax(); } *SIO0TXB = c; } diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile index cfd690bf6d8..6c6b6c37663 100644 --- a/arch/m32r/kernel/Makefile +++ b/arch/m32r/kernel/Makefile @@ -10,6 +10,7 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \ obj-$(CONFIG_SMP) += smp.o smpboot.o obj-$(CONFIG_PLAT_MAPPI) += setup_mappi.o io_mappi.o obj-$(CONFIG_PLAT_MAPPI2) += setup_mappi2.o io_mappi2.o +obj-$(CONFIG_PLAT_MAPPI3) += setup_mappi3.o io_mappi3.o obj-$(CONFIG_PLAT_USRV) += setup_usrv.o io_usrv.o obj-$(CONFIG_PLAT_M32700UT) += setup_m32700ut.o io_m32700ut.o obj-$(CONFIG_PLAT_OPSPUT) += setup_opsput.o io_opsput.o @@ -17,4 +18,3 @@ obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_PLAT_OAKS32R) += setup_oaks32r.o io_oaks32r.o EXTRA_AFLAGS := -traditional - diff --git a/arch/m32r/kernel/io_m32700ut.c b/arch/m32r/kernel/io_m32700ut.c index 371ba904e96..e545b065f7e 100644 --- a/arch/m32r/kernel/io_m32700ut.c +++ b/arch/m32r/kernel/io_m32700ut.c @@ -3,8 +3,8 @@ * * Typical I/O routines for M32700UT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -172,64 +172,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -287,52 +244,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi.c b/arch/m32r/kernel/io_mappi.c index 85688ffb52f..78033165fb5 100644 --- a/arch/m32r/kernel/io_mappi.c +++ b/arch/m32r/kernel/io_mappi.c @@ -3,8 +3,8 @@ * * Typical I/O routines for Mappi board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto */ #include @@ -130,57 +130,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread(0, port, &b, sizeof(b), 1, 0); - return b; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned char b; - pcc_ioread(1, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread(0, port, &w, sizeof(w), 1, 0); - return w; - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - unsigned short w; - pcc_ioread(1, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -229,41 +193,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &b, sizeof(b), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_PCC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite(0, port, &w, sizeof(w), 1, 0); - } else if (port >= M32R_PCC_IOSTART1 && port <= M32R_PCC_IOEND1) { - pcc_iowrite(1, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi2.c b/arch/m32r/kernel/io_mappi2.c index 4182cd4f97c..5c03504bf65 100644 --- a/arch/m32r/kernel/io_mappi2.c +++ b/arch/m32r/kernel/io_mappi2.c @@ -3,7 +3,7 @@ * * Typical I/O routines for Mappi2 board. * - * Copyright (c) 2001-2003 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -25,7 +25,7 @@ extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); -#endif /* CONFIG_PCMCIA && CONFIG_MAPPI2_CFC */ +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ #define PORT2ADDR(port) _port2addr(port) #define PORT2ADDR_NE(port) _port2addr_ne(port) @@ -169,64 +169,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned char *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - return *(volatile unsigned short *)__port2addr_ata(port); - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - v = *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -284,52 +241,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned char *)__port2addr_ata(port) = b; - } else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) - if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { - *(volatile unsigned short *)__port2addr_ata(port) = w; - } else -#endif -#if defined(CONFIG_USB) - if (port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_mappi3.c b/arch/m32r/kernel/io_mappi3.c new file mode 100644 index 00000000000..c80bde65785 --- /dev/null +++ b/arch/m32r/kernel/io_mappi3.c @@ -0,0 +1,378 @@ +/* + * linux/arch/m32r/kernel/io_mappi3.c + * + * Typical I/O routines for Mappi3 board. + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include +#include +#include +#include +#include + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) +#include + +#define M32R_PCC_IOMAP_SIZE 0x1000 + +#define M32R_PCC_IOSTART0 0x1000 +#define M32R_PCC_IOEND0 (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1) + +extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int); +extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); +#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */ + +#define PORT2ADDR(port) _port2addr(port) +#define PORT2ADDR_NE(port) _port2addr_ne(port) +#define PORT2ADDR_USB(port) _port2addr_usb(port) + +static inline void *_port2addr(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET); +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 + +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) +static inline void *__port2addr_ata(unsigned long port) +{ + static int dummy_reg; + + switch (port) { + case 0x1f0: return (void *)0xb4002000; + case 0x1f1: return (void *)0xb4012800; + case 0x1f2: return (void *)0xb4012002; + case 0x1f3: return (void *)0xb4012802; + case 0x1f4: return (void *)0xb4012004; + case 0x1f5: return (void *)0xb4012804; + case 0x1f6: return (void *)0xb4012006; + case 0x1f7: return (void *)0xb4012806; + case 0x3f6: return (void *)0xb401200e; + default: return (void *)&dummy_reg; + } +} +#endif + +static inline void *_port2addr_ne(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x10000000); +} + +static inline void *_port2addr_usb(unsigned long port) +{ + return (void *)(port + NONCACHE_OFFSET + 0x12000000); +} +static inline void delay(void) +{ + __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); +} + +/* + * NIC I/O function + */ + +static inline unsigned char _ne_inb(void *portp) +{ + return (unsigned char) *(volatile unsigned char *)portp; +} + +static inline unsigned short _ne_inw(void *portp) +{ + return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp); +} + +static inline void _ne_insb(void *portp, void * addr, unsigned long count) +{ + unsigned char *buf = addr; + + while (count--) + *buf++ = *(volatile unsigned char *)portp; +} + +static inline void _ne_outb(unsigned char b, void *portp) +{ + *(volatile unsigned char *)portp = (unsigned char)b; +} + +static inline void _ne_outw(unsigned short w, void *portp) +{ + *(volatile unsigned short *)portp = cpu_to_le16(w); +} + +unsigned char _inb(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inb(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned char *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned char b; + pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); + return b; + } else +#endif + return *(volatile unsigned char *)PORT2ADDR(port); +} + +unsigned short _inw(unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + return _ne_inw(PORT2ADDR_NE(port)); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + return *(volatile unsigned short *)__port2addr_ata(port); + } +#endif +#if defined(CONFIG_USB) + else if (port >= 0x340 && port < 0x3a0) + return *(volatile unsigned short *)PORT2ADDR_USB(port); +#endif + +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned short w; + pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); + return w; + } else +#endif + return *(volatile unsigned short *)PORT2ADDR(port); +} + +unsigned long _inl(unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + unsigned long l; + pcc_ioread_word(0, port, &l, sizeof(l), 1, 0); + return l; + } else +#endif + return *(volatile unsigned long *)PORT2ADDR(port); +} + +unsigned char _inb_p(unsigned long port) +{ + unsigned char v = _inb(port); + delay(); + return (v); +} + +unsigned short _inw_p(unsigned long port) +{ + unsigned short v = _inw(port); + delay(); + return (v); +} + +unsigned long _inl_p(unsigned long port) +{ + unsigned long v = _inl(port); + delay(); + return (v); +} + +void _outb(unsigned char b, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outb(b, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned char *)__port2addr_ata(port) = b; + } else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); + } else +#endif + *(volatile unsigned char *)PORT2ADDR(port) = b; +} + +void _outw(unsigned short w, unsigned long port) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_outw(w, PORT2ADDR_NE(port)); + else +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + *(volatile unsigned short *)__port2addr_ata(port) = w; + } else +#endif +#if defined(CONFIG_USB) + if (port >= 0x340 && port < 0x3a0) + *(volatile unsigned short *)PORT2ADDR_USB(port) = w; + else +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); + } else +#endif + *(volatile unsigned short *)PORT2ADDR(port) = w; +} + +void _outl(unsigned long l, unsigned long port) +{ +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0); + } else +#endif + *(volatile unsigned long *)PORT2ADDR(port) = l; +} + +void _outb_p(unsigned char b, unsigned long port) +{ + _outb(b, port); + delay(); +} + +void _outw_p(unsigned short w, unsigned long port) +{ + _outw(w, port); + delay(); +} + +void _outl_p(unsigned long l, unsigned long port) +{ + _outl(l, port); + delay(); +} + +void _insb(unsigned int port, void * addr, unsigned long count) +{ + if (port >= LAN_IOSTART && port < LAN_IOEND) + _ne_insb(PORT2ADDR_NE(port), addr, count); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + unsigned char *buf = addr; + unsigned char *portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); + } +#endif + else { + unsigned char *buf = addr; + unsigned char *portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned char *)portp; + } +} + +void _insw(unsigned int port, void * addr, unsigned long count) +{ + unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned short *)portp; + } +} + +void _insl(unsigned int port, void * addr, unsigned long count) +{ + unsigned long *buf = addr; + unsigned long *portp; + + portp = PORT2ADDR(port); + while (count--) + *buf++ = *(volatile unsigned long *)portp; +} + +void _outsb(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned char *buf = addr; + unsigned char *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + _ne_outb(*buf++, portp); +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned char *)portp = *buf++; + } +} + +void _outsw(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned short *buf = addr; + unsigned short *portp; + + if (port >= LAN_IOSTART && port < LAN_IOEND) { + portp = PORT2ADDR_NE(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC) + } else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) { + portp = __port2addr_ata(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; +#endif +#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) + } else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { + pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short), + count, 1); +#endif + } else { + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned short *)portp = *buf++; + } +} + +void _outsl(unsigned int port, const void * addr, unsigned long count) +{ + const unsigned long *buf = addr; + unsigned char *portp; + + portp = PORT2ADDR(port); + while (count--) + *(volatile unsigned long *)portp = *buf++; +} diff --git a/arch/m32r/kernel/io_oaks32r.c b/arch/m32r/kernel/io_oaks32r.c index 286964794d5..9997dddd24d 100644 --- a/arch/m32r/kernel/io_oaks32r.c +++ b/arch/m32r/kernel/io_oaks32r.c @@ -3,7 +3,7 @@ * * Typical I/O routines for OAKS32R board. * - * Copyright (c) 2001-2004 Hiroyuki Kondo, Hirokazu Takata, + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, * Hitoshi Yamamoto, Mamoru Sakugawa */ @@ -90,35 +90,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inb(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= 0x300 && port < 0x320) - v = _ne_inw(PORT2ADDR_NE(port)); - else - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -146,27 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outb(b, PORT2ADDR_NE(port)); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= 0x300 && port < 0x320) - _ne_outw(w, PORT2ADDR_NE(port)); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_opsput.c b/arch/m32r/kernel/io_opsput.c index aaf42f9f76d..e34951e8156 100644 --- a/arch/m32r/kernel/io_opsput.c +++ b/arch/m32r/kernel/io_opsput.c @@ -1,10 +1,10 @@ /* - * linux/arch/m32r/kernel/io_mappi.c + * linux/arch/m32r/kernel/io_opsput.c * * Typical I/O routines for OPSPUT board. * - * Copyright (c) 2001, 2002 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -98,7 +98,6 @@ unsigned char _inb(unsigned long port) { if (port >= LAN_IOSTART && port < LAN_IOEND) return _ne_inb(PORT2ADDR_NE(port)); - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned char b; @@ -118,7 +117,6 @@ unsigned short _inw(unsigned long port) else if(port >= 0x340 && port < 0x3a0) return *(volatile unsigned short *)PORT2ADDR_USB(port); #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { unsigned short w; @@ -143,55 +141,21 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inb(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned char b; - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else -#endif - v = *(volatile unsigned char *)PORT2ADDR(port); - + unsigned char v = _inb(port); delay(); return (v); } unsigned short _inw_p(unsigned long port) { - unsigned short v; - - if (port >= LAN_IOSTART && port < LAN_IOEND) - v = _ne_inw(PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - return *(volatile unsigned short *)PORT2ADDR_USB(port); - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - unsigned short w; - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else -#endif - v = *(volatile unsigned short *)PORT2ADDR(port); - + unsigned short v = _inw(port); delay(); return (v); } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); return (v); } @@ -219,7 +183,6 @@ void _outw(unsigned short w, unsigned long port) *(volatile unsigned short *)PORT2ADDR_USB(port) = w; else #endif - #if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); @@ -240,43 +203,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outb(b, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - } else -#endif - *(volatile unsigned char *)PORT2ADDR(port) = b; - + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= LAN_IOSTART && port < LAN_IOEND) - _ne_outw(w, PORT2ADDR_NE(port)); - else -#if defined(CONFIG_USB) - if(port >= 0x340 && port < 0x3a0) - *(volatile unsigned short *)PORT2ADDR_USB(port) = w; - else -#endif - -#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC) - if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) { - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - } else -#endif - *(volatile unsigned short *)PORT2ADDR(port) = w; - + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/io_usrv.c b/arch/m32r/kernel/io_usrv.c index 27928a0b99e..9eb161dcc10 100644 --- a/arch/m32r/kernel/io_usrv.c +++ b/arch/m32r/kernel/io_usrv.c @@ -3,8 +3,8 @@ * * Typical I/O routines for uServer board. * - * Copyright (c) 2001 - 2003 Hiroyuki Kondo, Hirokazu Takata, - * Hitoshi Yamamoto, Takeo Takahashi + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Takeo Takahashi * * This file is subject to the terms and conditions of the GNU General * Public License. See the file "COPYING" in the main directory of this @@ -39,7 +39,7 @@ extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int); #define PORT2ADDR(port) _port2addr(port) -static __inline__ void *_port2addr(unsigned long port) +static inline void *_port2addr(unsigned long port) { #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) if (port >= UART0_IOSTART && port <= UART0_IOEND) @@ -50,7 +50,7 @@ static __inline__ void *_port2addr(unsigned long port) return (void *)(port + NONCACHE_OFFSET); } -static __inline__ void delay(void) +static inline void delay(void) { __asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory"); } @@ -87,39 +87,22 @@ unsigned long _inl(unsigned long port) unsigned char _inb_p(unsigned long port) { - unsigned char b; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0); - return b; - } else { - b = *(volatile unsigned char *)PORT2ADDR(port); - delay(); - return b; - } + unsigned char v = _inb(port); + delay(); + return v; } unsigned short _inw_p(unsigned long port) { - unsigned short w; - - if (port >= CFC_IOSTART && port <= CFC_IOEND) { - pcc_ioread_word(0, port, &w, sizeof(w), 1, 0); - return w; - } else { - w = *(volatile unsigned short *)PORT2ADDR(port); - delay(); - return w; - } + unsigned short v = _inw(port); + delay(); + return v; } unsigned long _inl_p(unsigned long port) { - unsigned long v; - - v = *(volatile unsigned long *)PORT2ADDR(port); + unsigned long v = _inl(port); delay(); - return v; } @@ -149,25 +132,19 @@ void _outl(unsigned long l, unsigned long port) void _outb_p(unsigned char b, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0); - else - *(volatile unsigned char *)PORT2ADDR(port) = b; + _outb(b, port); delay(); } void _outw_p(unsigned short w, unsigned long port) { - if (port >= CFC_IOSTART && port <= CFC_IOEND) - pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0); - else - *(volatile unsigned short *)PORT2ADDR(port) = w; + _outw(w, port); delay(); } void _outl_p(unsigned long l, unsigned long port) { - *(volatile unsigned long *)PORT2ADDR(port) = l; + _outl(l, port); delay(); } diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index 4826cd6e40e..ec5674727e7 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -330,6 +330,8 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "Machine\t\t: Mappi Evaluation board\n"); #elif CONFIG_PLAT_MAPPI2 seq_printf(m, "Machine\t\t: Mappi-II Evaluation board\n"); +#elif CONFIG_PLAT_MAPPI3 + seq_printf(m, "Machine\t\t: Mappi-III Evaluation board\n"); #elif CONFIG_PLAT_M32700UT seq_printf(m, "Machine\t\t: M32700UT Evaluation board\n"); #elif CONFIG_PLAT_OPSPUT diff --git a/arch/m32r/kernel/setup_mappi2.c b/arch/m32r/kernel/setup_mappi2.c index 1904d465a50..248fc658dbd 100644 --- a/arch/m32r/kernel/setup_mappi2.c +++ b/arch/m32r/kernel/setup_mappi2.c @@ -1,5 +1,5 @@ /* - * linux/arch/m32r/kernel/setup_mappi.c + * linux/arch/m32r/kernel/setup_mappi2.c * * Setup routines for Renesas MAPPI-II(M3A-ZA36) Board * @@ -156,7 +156,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFIREQ].handler = &mappi2_irq_type; irq_desc[PLD_IRQ_CFIREQ].action = 0; irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ -// icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; disable_mappi2_irq(PLD_IRQ_CFIREQ); @@ -167,7 +166,6 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_INSERT].action = 0; irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; -// icu_data[PLD_IRQ_CFC_INSERT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_INSERT); /* ICUCR42: CFC Eject */ @@ -176,9 +174,7 @@ void __init init_IRQ(void) irq_desc[PLD_IRQ_CFC_EJECT].action = 0; irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; -// icu_data[PLD_IRQ_CFC_EJECT].icucr = 0; disable_mappi2_irq(PLD_IRQ_CFC_EJECT); - #endif /* CONFIG_MAPPI2_CFC */ } diff --git a/arch/m32r/kernel/setup_mappi3.c b/arch/m32r/kernel/setup_mappi3.c new file mode 100644 index 00000000000..72b5b7609ce --- /dev/null +++ b/arch/m32r/kernel/setup_mappi3.c @@ -0,0 +1,208 @@ +/* + * linux/arch/m32r/kernel/setup_mappi3.c + * + * Setup routines for Renesas MAPPI-III(M3A-2170) Board + * + * Copyright (c) 2001-2005 Hiroyuki Kondo, Hirokazu Takata, + * Hitoshi Yamamoto, Mamoru Sakugawa + */ + +#include +#include +#include +#include +#include + +#include +#include +#include + +#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long))) + +#ifndef CONFIG_SMP +typedef struct { + unsigned long icucr; /* ICU Control Register */ +} icu_data_t; +#endif /* CONFIG_SMP */ + +icu_data_t icu_data[NR_IRQS]; + +static void disable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7; + outl(data, port); +} + +static void enable_mappi3_irq(unsigned int irq) +{ + unsigned long port, data; + + if ((irq == 0) ||(irq >= NR_IRQS)) { + printk("bad irq 0x%08x\n", irq); + return; + } + port = irq2port(irq); + data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6; + outl(data, port); +} + +static void mask_and_ack_mappi3(unsigned int irq) +{ + disable_mappi3_irq(irq); +} + +static void end_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); +} + +static unsigned int startup_mappi3_irq(unsigned int irq) +{ + enable_mappi3_irq(irq); + return (0); +} + +static void shutdown_mappi3_irq(unsigned int irq) +{ + unsigned long port; + + port = irq2port(irq); + outl(M32R_ICUCR_ILEVEL7, port); +} + +static struct hw_interrupt_type mappi3_irq_type = +{ + "MAPPI3-IRQ", + startup_mappi3_irq, + shutdown_mappi3_irq, + enable_mappi3_irq, + disable_mappi3_irq, + mask_and_ack_mappi3, + end_mappi3_irq +}; + +void __init init_IRQ(void) +{ +#if defined(CONFIG_SMC91X) + /* INT0 : LAN controller (SMC91111) */ + irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT0].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT0].action = 0; + irq_desc[M32R_IRQ_INT0].depth = 1; + icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(M32R_IRQ_INT0); +#endif /* CONFIG_SMC91X */ + + /* MFT2 : system timer */ + irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_MFT2].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_MFT2].action = 0; + irq_desc[M32R_IRQ_MFT2].depth = 1; + icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; + disable_mappi3_irq(M32R_IRQ_MFT2); + +#ifdef CONFIG_SERIAL_M32R_SIO + /* SIO0_R : uart receive data */ + irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_R].action = 0; + irq_desc[M32R_IRQ_SIO0_R].depth = 1; + icu_data[M32R_IRQ_SIO0_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_R); + + /* SIO0_S : uart send data */ + irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO0_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO0_S].action = 0; + irq_desc[M32R_IRQ_SIO0_S].depth = 1; + icu_data[M32R_IRQ_SIO0_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO0_S); + /* SIO1_R : uart receive data */ + irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_R].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_R].action = 0; + irq_desc[M32R_IRQ_SIO1_R].depth = 1; + icu_data[M32R_IRQ_SIO1_R].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_R); + + /* SIO1_S : uart send data */ + irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_SIO1_S].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_SIO1_S].action = 0; + irq_desc[M32R_IRQ_SIO1_S].depth = 1; + icu_data[M32R_IRQ_SIO1_S].icucr = 0; + disable_mappi3_irq(M32R_IRQ_SIO1_S); +#endif /* CONFIG_M32R_USE_DBG_CONSOLE */ + +#if defined(CONFIG_USB) + /* INT1 : USB Host controller interrupt */ + irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; + irq_desc[M32R_IRQ_INT1].handler = &mappi3_irq_type; + irq_desc[M32R_IRQ_INT1].action = 0; + irq_desc[M32R_IRQ_INT1].depth = 1; + icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD01; + disable_mappi3_irq(M32R_IRQ_INT1); +#endif /* CONFIG_USB */ + + /* ICUCR40: CFC IREQ */ + irq_desc[PLD_IRQ_CFIREQ].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFIREQ].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFIREQ].action = 0; + irq_desc[PLD_IRQ_CFIREQ].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFIREQ].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01; + disable_mappi3_irq(PLD_IRQ_CFIREQ); + +#if defined(CONFIG_M32R_CFC) + /* ICUCR41: CFC Insert */ + irq_desc[PLD_IRQ_CFC_INSERT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_INSERT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_INSERT].action = 0; + irq_desc[PLD_IRQ_CFC_INSERT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_INSERT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD00; + disable_mappi3_irq(PLD_IRQ_CFC_INSERT); + + /* ICUCR42: CFC Eject */ + irq_desc[PLD_IRQ_CFC_EJECT].status = IRQ_DISABLED; + irq_desc[PLD_IRQ_CFC_EJECT].handler = &mappi3_irq_type; + irq_desc[PLD_IRQ_CFC_EJECT].action = 0; + irq_desc[PLD_IRQ_CFC_EJECT].depth = 1; /* disable nested irq */ + icu_data[PLD_IRQ_CFC_EJECT].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; + disable_mappi3_irq(PLD_IRQ_CFC_EJECT); +#endif /* CONFIG_M32R_CFC */ +} + +#define LAN_IOSTART 0x300 +#define LAN_IOEND 0x320 +static struct resource smc91x_resources[] = { + [0] = { + .start = (LAN_IOSTART), + .end = (LAN_IOEND), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = M32R_IRQ_INT0, + .end = M32R_IRQ_INT0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init platform_init(void) +{ + platform_device_register(&smc91x_device); + return 0; +} +arch_initcall(platform_init); diff --git a/arch/m32r/mappi3/defconfig.smp b/arch/m32r/mappi3/defconfig.smp new file mode 100644 index 00000000000..2eebe75fc07 --- /dev/null +++ b/arch/m32r/mappi3/defconfig.smp @@ -0,0 +1,751 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12-rc5 +# Tue May 31 17:55:34 2005 +# +CONFIG_M32R=y +# CONFIG_UID16 is not set +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_CPUSETS is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y + +# +# Processor type and features +# +# CONFIG_PLAT_MAPPI is not set +# CONFIG_PLAT_USRV is not set +# CONFIG_PLAT_M32700UT is not set +# CONFIG_PLAT_OPSPUT is not set +# CONFIG_PLAT_OAKS32R is not set +# CONFIG_PLAT_MAPPI2 is not set +CONFIG_PLAT_MAPPI3=y +CONFIG_CHIP_M32700=y +# CONFIG_CHIP_M32102 is not set +# CONFIG_CHIP_VDEC2 is not set +# CONFIG_CHIP_OPSP is not set +CONFIG_MMU=y +CONFIG_TLB_ENTRIES=32 +CONFIG_ISA_M32R2=y +CONFIG_ISA_DSP_LEVEL2=y +CONFIG_ISA_DUAL_ISSUE=y +CONFIG_BUS_CLOCK=10000000 +CONFIG_TIMER_DIVIDE=128 +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_MEMORY_START=0x08000000 +CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_NOHIGHMEM=y +CONFIG_DISCONTIGMEM=y +CONFIG_IRAM_START=0x00f00000 +CONFIG_IRAM_SIZE=0x00080000 +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_PREEMPT=y +# CONFIG_HAVE_DEC_LOCK is not set +CONFIG_SMP=y +# CONFIG_CHIP_M32700_TS1 is not set +CONFIG_NR_CPUS=2 +# CONFIG_NUMA is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ISA is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y + +# +# PC-card bridges +# +# CONFIG_TCIC is not set +# CONFIG_M32R_PCC is not set +# CONFIG_M32R_CFC is not set + +# +# PCI Hotplug Support +# + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=m +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_NE2000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_M32R_SIO=y +CONFIG_SERIAL_M32R_SIO_CONSOLE=y +# CONFIG_SERIAL_M32R_PLDSIO is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_RTC is not set +# CONFIG_GEN_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS_FS=y +CONFIG_JFFS_FS_VERBOSE=0 +CONFIG_JFFS_PROC_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=15 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_FRAME_POINTER is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/m32r/mappi3/dot.gdbinit b/arch/m32r/mappi3/dot.gdbinit new file mode 100644 index 00000000000..89c22184e13 --- /dev/null +++ b/arch/m32r/mappi3/dot.gdbinit @@ -0,0 +1,224 @@ +# .gdbinit file +# $Id: dot.gdbinit,v 1.1 2005/04/11 02:21:08 sakugawa Exp $ + +# setting +set width 0d70 +set radix 0d16 +use_debug_dma + +# Initialize SDRAM controller for Mappi +define sdram_init + # SDIR0 + set *(unsigned long *)0x00ef6008 = 0x00000182 + # SDIR1 + set *(unsigned long *)0x00ef600c = 0x00000001 + # Initialize wait + shell sleep 0.1 + # MOD + set *(unsigned long *)0x00ef602c = 0x00000020 + set *(unsigned long *)0x00ef604c = 0x00000020 + # TR + set *(unsigned long *)0x00ef6028 = 0x00051502 + set *(unsigned long *)0x00ef6048 = 0x00051502 + # ADR + set *(unsigned long *)0x00ef6020 = 0x08000004 + set *(unsigned long *)0x00ef6040 = 0x0c000004 + # AutoRef On + set *(unsigned long *)0x00ef6004 = 0x00010517 + # Access enable + set *(unsigned long *)0x00ef6024 = 0x00000001 + set *(unsigned long *)0x00ef6044 = 0x00000001 +end + +# Initialize LAN controller for Mappi +define lanc_init + # Set BSEL4 + #set *(unsigned long *)0x00ef5004 = 0x0fff330f + #set *(unsigned long *)0x00ef5004 = 0x01113301 + +# set *(unsigned long *)0x00ef5004 = 0x02011101 +# set *(unsigned long *)0x00ef5004 = 0x04441104 +end + +define clock_init + set *(unsigned long *)0x00ef4010 = 2 + set *(unsigned long *)0x00ef4014 = 2 + set *(unsigned long *)0x00ef4020 = 3 + set *(unsigned long *)0x00ef4024 = 3 + set *(unsigned long *)0x00ef4004 = 0x7 +# shell sleep 0.1 +# set *(unsigned long *)0x00ef4004 = 0x5 + shell sleep 0.1 + set *(unsigned long *)0x00ef4008 = 0x0200 +end + +define port_init + set $sfrbase = 0x00ef0000 + set *(unsigned short *)0x00ef1060 = 0x5555 + set *(unsigned short *)0x00ef1062 = 0x5555 + set *(unsigned short *)0x00ef1064 = 0x5555 + set *(unsigned short *)0x00ef1066 = 0x5555 + set *(unsigned short *)0x00ef1068 = 0x5555 + set *(unsigned short *)0x00ef106a = 0x0000 + set *(unsigned short *)0x00ef106e = 0x5555 + set *(unsigned short *)0x00ef1070 = 0x5555 +end + +# MMU enable +define mmu_enable + set $evb=0x88000000 + set *(unsigned long *)0xffff0024=1 +end + +# MMU disable +define mmu_disable + set $evb=0 + set *(unsigned long *)0xffff0024=0 +end + +# Show TLB entries +define show_tlb_entries + set $i = 0 + set $addr = $arg0 + while ($i < 0d16 ) + set $tlb_tag = *(unsigned long*)$addr + set $tlb_data = *(unsigned long*)($addr + 4) + printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data + set $i = $i + 1 + set $addr = $addr + 8 + end +end +define itlb + set $itlb=0xfe000000 + show_tlb_entries $itlb +end +define dtlb + set $dtlb=0xfe000800 + show_tlb_entries $dtlb +end + +# Cache ON +define set_cache_type + set $mctype = (void*)0xfffffff8 +# chaos +# set *(unsigned long *)($mctype) = 0x0000c000 +# m32102 i-cache only + set *(unsigned long *)($mctype) = 0x00008000 +# m32102 d-cache only +# set *(unsigned long *)($mctype) = 0x00004000 +end +define cache_on + set $param = (void*)0x08001000 + set *(unsigned long *)($param) = 0x60ff6102 +end + + +# Show current task structure +define show_current + set $current = $spi & 0xffffe000 + printf "$current=0x%08lX\n",$current + print *(struct task_struct *)$current +end + +# Show user assigned task structure +define show_task + set $task = $arg0 & 0xffffe000 + printf "$task=0x%08lX\n",$task + print *(struct task_struct *)$task +end +document show_task + Show user assigned task structure + arg0 : task structure address +end + +# Show M32R registers +define show_regs + printf " R0[0x%08lX] R1[0x%08lX] R2[0x%08lX] R3[0x%08lX]\n",$r0,$r1,$r2,$r3 + printf " R4[0x%08lX] R5[0x%08lX] R6[0x%08lX] R7[0x%08lX]\n",$r4,$r5,$r6,$r7 + printf " R8[0x%08lX] R9[0x%08lX] R10[0x%08lX] R11[0x%08lX]\n",$r8,$r9,$r10,$r11 + printf "R12[0x%08lX] FP[0x%08lX] LR[0x%08lX] SP[0x%08lX]\n",$r12,$fp,$lr,$sp + printf "PSW[0x%08lX] CBR[0x%08lX] SPI[0x%08lX] SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu + printf "BPC[0x%08lX] PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch + printf "EVB[0x%08lX]\n",$evb + + set $mests = *(unsigned long *)0xffff000c + set $mdeva = *(unsigned long *)0xffff0010 + printf "MESTS[0x%08lX] MDEVA[0x%08lX]\n",$mests,$mdeva +end + + +# Setup all +define setup + clock_init + shell sleep 0.1 + port_init + sdram_init +# lanc_init +# dispc_init +# set $evb=0x08000000 +end + +# Load modules +define load_modules + use_debug_dma + load +# load busybox.mot +end + +# Set kernel parameters +define set_kernel_parameters + set $param = (void*)0x08001000 + + ## MOUNT_ROOT_RDONLY + set {long}($param+0x00)=0 + ## RAMDISK_FLAGS + #set {long}($param+0x04)=0 + ## ORIG_ROOT_DEV + #set {long}($param+0x08)=0x00000100 + ## LOADER_TYPE + #set {long}($param+0x0C)=0 + ## INITRD_START + set {long}($param+0x10)=0x082a0000 + ## INITRD_SIZE + set {long}($param+0x14)=0d6200000 + + # M32R_CPUCLK + set *(unsigned long *)($param + 0x0018) = 0d100000000 + # M32R_BUSCLK + set *(unsigned long *)($param + 0x001c) = 0d50000000 + # M32R_TIMER_DIVIDE + set *(unsigned long *)($param + 0x0020) = 0d128 + + + set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/root.2.6_04 nfsaddrs=192.168.0.102:192.168.0.1:192.168.0.1:255.255.255.0:mappi: \0" + + +end + +# Boot +define boot + set_kernel_parameters + debug_chaos + set *(unsigned long *)0x00f00000=0x08002000 + set $pc=0x08002000 + set $fp=0 + del b + si +end + +# Restart +define restart + sdireset + sdireset + setup + load_modules + boot +end + +sdireset +sdireset +file vmlinux +target m32rsdi + +restart +boot diff --git a/include/asm-m32r/ide.h b/include/asm-m32r/ide.h index be64f24e37e..194393bd8be 100644 --- a/include/asm-m32r/ide.h +++ b/include/asm-m32r/ide.h @@ -35,7 +35,7 @@ static __inline__ int ide_default_irq(unsigned long base) { switch (base) { -#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) +#if defined(CONFIG_PLAT_M32700UT) || defined(CONFIG_PLAT_MAPPI2) || defined(CONFIG_PLAT_MAPPI3) case 0x1f0: return PLD_IRQ_CFIREQ; default: return 0; diff --git a/include/asm-m32r/m32102.h b/include/asm-m32r/m32102.h index b56034026bf..cb98101f4f6 100644 --- a/include/asm-m32r/m32102.h +++ b/include/asm-m32r/m32102.h @@ -175,6 +175,7 @@ #define M32R_ICU_CR5_PORTL (0x210+M32R_ICU_OFFSET) /* INT4 */ #define M32R_ICU_CR6_PORTL (0x214+M32R_ICU_OFFSET) /* INT5 */ #define M32R_ICU_CR7_PORTL (0x218+M32R_ICU_OFFSET) /* INT6 */ +#define M32R_ICU_CR8_PORTL (0x219+M32R_ICU_OFFSET) /* INT7 */ #define M32R_ICU_CR16_PORTL (0x23C+M32R_ICU_OFFSET) /* MFT0 */ #define M32R_ICU_CR17_PORTL (0x240+M32R_ICU_OFFSET) /* MFT1 */ #define M32R_ICU_CR18_PORTL (0x244+M32R_ICU_OFFSET) /* MFT2 */ diff --git a/include/asm-m32r/m32r.h b/include/asm-m32r/m32r.h index f116649bbef..fd2b2823762 100644 --- a/include/asm-m32r/m32r.h +++ b/include/asm-m32r/m32r.h @@ -36,6 +36,10 @@ #include #endif /* CONFIG_PLAT_MAPPI2 */ +#if defined(CONFIG_PLAT_MAPPI3) +#include +#endif /* CONFIG_PLAT_MAPPI3 */ + #if defined(CONFIG_PLAT_USRV) #include #endif diff --git a/include/asm-m32r/mappi3/mappi3_pld.h b/include/asm-m32r/mappi3/mappi3_pld.h new file mode 100644 index 00000000000..3f1551f7f01 --- /dev/null +++ b/include/asm-m32r/mappi3/mappi3_pld.h @@ -0,0 +1,143 @@ +/* + * include/asm/mappi3/mappi3_pld.h + * + * Definitions for Extended IO Logic on MAPPI3 board. + * based on m32700ut_pld.h + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of + * this archive for more details. + * + */ + +#ifndef _MAPPI3_PLD_H +#define _MAPPI3_PLD_H + +#ifndef __ASSEMBLY__ +/* FIXME: + * Some C functions use non-cache address, so can't define non-cache address. + */ +#define PLD_BASE (0x1c000000 /* + NONCACHE_OFFSET */) +#define __reg8 (volatile unsigned char *) +#define __reg16 (volatile unsigned short *) +#define __reg32 (volatile unsigned int *) +#else +#define PLD_BASE (0x1c000000 + NONCACHE_OFFSET) +#define __reg8 +#define __reg16 +#define __reg32 +#endif /* __ASSEMBLY__ */ + +/* CFC */ +#define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000) +#define PLD_CFSTS __reg16(PLD_BASE + 0x0002) +#define PLD_CFIMASK __reg16(PLD_BASE + 0x0004) +#define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006) +#define PLD_CFCR0 __reg16(PLD_BASE + 0x000a) +#define PLD_CFCR1 __reg16(PLD_BASE + 0x000c) + +/* MMC */ +#define PLD_MMCCR __reg16(PLD_BASE + 0x4000) +#define PLD_MMCMOD __reg16(PLD_BASE + 0x4002) +#define PLD_MMCSTS __reg16(PLD_BASE + 0x4006) +#define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a) +#define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c) +#define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e) +#define PLD_MMCDET __reg16(PLD_BASE + 0x4010) +#define PLD_MMCWP __reg16(PLD_BASE + 0x4012) +#define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000) +#define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000) +#define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000) +#define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006) + +/* Power Control of MMC and CF */ +#define PLD_CPCR __reg16(PLD_BASE + 0x14000) + + +/*==== ICU ====*/ +#define M32R_IRQ_PC104 (5) /* INT4(PC/104) */ +#define M32R_IRQ_I2C (28) /* I2C-BUS */ +#define PLD_IRQ_CFIREQ (6) /* INT5 CFC Card Interrupt */ +#define PLD_IRQ_CFC_INSERT (7) /* INT6 CFC Card Insert */ +#define PLD_IRQ_CFC_EJECT (8) /* INT7 CFC Card Eject */ +#define PLD_IRQ_MMCCARD (43) /* MMC Card Insert */ +#define PLD_IRQ_MMCIRQ (44) /* MMC Transfer Done */ + + +#if 0 +/* LED Control + * + * 1: DIP swich side + * 2: Reset switch side + */ +#define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002) +#define PLD_IOLED_1_ON 0x001 +#define PLD_IOLED_1_OFF 0x000 +#define PLD_IOLED_2_ON 0x002 +#define PLD_IOLED_2_OFF 0x000 + +/* DIP Switch + * 0: Write-protect of Flash Memory (0:protected, 1:non-protected) + * 1: - + * 2: - + * 3: - + */ +#define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004) +#define PLD_IOSWSTS_IOSW2 0x0200 +#define PLD_IOSWSTS_IOSW1 0x0100 +#define PLD_IOSWSTS_IOWP0 0x0001 + +#endif + +/* CRC */ +#define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000) +#define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002) +#define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004) +#define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006) +#define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008) +#define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a) + + +#if 0 +/* RTC */ +#define PLD_RTCCR __reg16(PLD_BASE + 0x1c000) +#define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002) +#define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004) +#define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006) +#define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008) + +/* SIO0 */ +#define PLD_ESIO0CR __reg16(PLD_BASE + 0x20000) +#define PLD_ESIO0CR_TXEN 0x0001 +#define PLD_ESIO0CR_RXEN 0x0002 +#define PLD_ESIO0MOD0 __reg16(PLD_BASE + 0x20002) +#define PLD_ESIO0MOD0_CTSS 0x0040 +#define PLD_ESIO0MOD0_RTSS 0x0080 +#define PLD_ESIO0MOD1 __reg16(PLD_BASE + 0x20004) +#define PLD_ESIO0MOD1_LMFS 0x0010 +#define PLD_ESIO0STS __reg16(PLD_BASE + 0x20006) +#define PLD_ESIO0STS_TEMP 0x0001 +#define PLD_ESIO0STS_TXCP 0x0002 +#define PLD_ESIO0STS_RXCP 0x0004 +#define PLD_ESIO0STS_TXSC 0x0100 +#define PLD_ESIO0STS_RXSC 0x0200 +#define PLD_ESIO0STS_TXREADY (PLD_ESIO0STS_TXCP | PLD_ESIO0STS_TEMP) +#define PLD_ESIO0INTCR __reg16(PLD_BASE + 0x20008) +#define PLD_ESIO0INTCR_TXIEN 0x0002 +#define PLD_ESIO0INTCR_RXCEN 0x0004 +#define PLD_ESIO0BAUR __reg16(PLD_BASE + 0x2000a) +#define PLD_ESIO0TXB __reg16(PLD_BASE + 0x2000c) +#define PLD_ESIO0RXB __reg16(PLD_BASE + 0x2000e) + +/* SIM Card */ +#define PLD_SCCR __reg16(PLD_BASE + 0x38000) +#define PLD_SCMOD __reg16(PLD_BASE + 0x38004) +#define PLD_SCSTS __reg16(PLD_BASE + 0x38006) +#define PLD_SCINTCR __reg16(PLD_BASE + 0x38008) +#define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a) +#define PLD_SCTXB __reg16(PLD_BASE + 0x3800c) +#define PLD_SCRXB __reg16(PLD_BASE + 0x3800e) + +#endif + +#endif /* _MAPPI3_PLD.H */ -- 2.41.1