From 216ba023a96c04e8d3aabf83d5931c35b6e2dbbb Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 13 Oct 2008 10:40:19 +0100 Subject: [PATCH] mxser: Switch to kref tty Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- drivers/char/mxser.c | 192 +++++++++++++++++++++++-------------------- 1 file changed, 103 insertions(+), 89 deletions(-) diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index b638403e8e9..308cb601400 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -610,15 +610,16 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, return 0; } -static int mxser_set_baud(struct mxser_port *info, long newspd) +static int mxser_set_baud(struct tty_struct *tty, long newspd) { + struct mxser_port *info = tty->driver_data; int quot = 0, baud; unsigned char cval; - if (!info->port.tty || !info->port.tty->termios) + if (!tty->termios) return -1; - if (!(info->ioaddr)) + if (!info->ioaddr) return -1; if (newspd > info->max_baud) @@ -626,13 +627,13 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) if (newspd == 134) { quot = 2 * info->baud_base / 269; - tty_encode_baud_rate(info->port.tty, 134, 134); + tty_encode_baud_rate(tty, 134, 134); } else if (newspd) { quot = info->baud_base / newspd; if (quot == 0) quot = 1; baud = info->baud_base/quot; - tty_encode_baud_rate(info->port.tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); } else { quot = 0; } @@ -658,7 +659,7 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ #ifdef BOTHER - if (C_BAUD(info->port.tty) == BOTHER) { + if (C_BAUD(tty) == BOTHER) { quot = info->baud_base % newspd; quot *= 8; if (quot % newspd > newspd / 2) { @@ -679,21 +680,22 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) * This routine is called to set the UART divisor registers to match * the specified baud rate for a serial port. */ -static int mxser_change_speed(struct mxser_port *info, - struct ktermios *old_termios) +static int mxser_change_speed(struct tty_struct *tty, + struct ktermios *old_termios) { + struct mxser_port *info = tty->driver_data; unsigned cflag, cval, fcr; int ret = 0; unsigned char status; - if (!info->port.tty || !info->port.tty->termios) + if (!tty->termios) return ret; - cflag = info->port.tty->termios->c_cflag; - if (!(info->ioaddr)) + cflag = tty->termios->c_cflag; + if (!info->ioaddr) return ret; - if (mxser_set_baud_method[info->port.tty->index] == 0) - mxser_set_baud(info, tty_get_baud_rate(info->port.tty)); + if (mxser_set_baud_method[tty->index] == 0) + mxser_set_baud(tty, tty_get_baud_rate(tty)); /* byte size and parity */ switch (cflag & CSIZE) { @@ -762,9 +764,9 @@ static int mxser_change_speed(struct mxser_port *info, info->MCR |= UART_MCR_AFE; } else { status = inb(info->ioaddr + UART_MSR); - if (info->port.tty->hw_stopped) { + if (tty->hw_stopped) { if (status & UART_MSR_CTS) { - info->port.tty->hw_stopped = 0; + tty->hw_stopped = 0; if (info->type != PORT_16550A && !info->board->chip_flag) { outb(info->IER & ~UART_IER_THRI, @@ -774,11 +776,11 @@ static int mxser_change_speed(struct mxser_port *info, outb(info->IER, info->ioaddr + UART_IER); } - tty_wakeup(info->port.tty); + tty_wakeup(tty); } } else { if (!(status & UART_MSR_CTS)) { - info->port.tty->hw_stopped = 1; + tty->hw_stopped = 1; if ((info->type != PORT_16550A) && (!info->board->chip_flag)) { info->IER &= ~UART_IER_THRI; @@ -804,21 +806,21 @@ static int mxser_change_speed(struct mxser_port *info, * Set up parity check flag */ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->port.tty)) + if (I_INPCK(tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) + if (I_BRKINT(tty) || I_PARMRK(tty)) info->read_status_mask |= UART_LSR_BI; info->ignore_status_mask = 0; - if (I_IGNBRK(info->port.tty)) { + if (I_IGNBRK(tty)) { info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ - if (I_IGNPAR(info->port.tty)) { + if (I_IGNPAR(tty)) { info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | @@ -830,16 +832,16 @@ static int mxser_change_speed(struct mxser_port *info, } } if (info->board->chip_flag) { - mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty)); - mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty)); - if (I_IXON(info->port.tty)) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); + if (I_IXON(tty)) { mxser_enable_must_rx_software_flow_control( info->ioaddr); } else { mxser_disable_must_rx_software_flow_control( info->ioaddr); } - if (I_IXOFF(info->port.tty)) { + if (I_IXOFF(tty)) { mxser_enable_must_tx_software_flow_control( info->ioaddr); } else { @@ -855,7 +857,8 @@ static int mxser_change_speed(struct mxser_port *info, return ret; } -static void mxser_check_modem_status(struct mxser_port *port, int status) +static void mxser_check_modem_status(struct tty_struct *tty, + struct mxser_port *port, int status) { /* update input line counters */ if (status & UART_MSR_TERI) @@ -874,10 +877,11 @@ static void mxser_check_modem_status(struct mxser_port *port, int status) wake_up_interruptible(&port->port.open_wait); } + tty = tty_port_tty_get(&port->port); if (port->port.flags & ASYNC_CTS_FLOW) { - if (port->port.tty->hw_stopped) { + if (tty->hw_stopped) { if (status & UART_MSR_CTS) { - port->port.tty->hw_stopped = 0; + tty->hw_stopped = 0; if ((port->type != PORT_16550A) && (!port->board->chip_flag)) { @@ -887,11 +891,11 @@ static void mxser_check_modem_status(struct mxser_port *port, int status) outb(port->IER, port->ioaddr + UART_IER); } - tty_wakeup(port->port.tty); + tty_wakeup(tty); } } else { if (!(status & UART_MSR_CTS)) { - port->port.tty->hw_stopped = 1; + tty->hw_stopped = 1; if (port->type != PORT_16550A && !port->board->chip_flag) { port->IER &= ~UART_IER_THRI; @@ -903,8 +907,9 @@ static void mxser_check_modem_status(struct mxser_port *port, int status) } } -static int mxser_startup(struct mxser_port *info) +static int mxser_startup(struct tty_struct *tty) { + struct mxser_port *info = tty->driver_data; unsigned long page; unsigned long flags; @@ -921,8 +926,7 @@ static int mxser_startup(struct mxser_port *info) } if (!info->ioaddr || !info->type) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); free_page(page); spin_unlock_irqrestore(&info->slock, flags); return 0; @@ -952,8 +956,8 @@ static int mxser_startup(struct mxser_port *info) if (inb(info->ioaddr + UART_LSR) == 0xff) { spin_unlock_irqrestore(&info->slock, flags); if (capable(CAP_SYS_ADMIN)) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + if (tty) + set_bit(TTY_IO_ERROR, &tty->flags); return 0; } else return -ENODEV; @@ -991,14 +995,13 @@ static int mxser_startup(struct mxser_port *info) (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR); - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; /* * and set the speed of the serial port */ - mxser_change_speed(info, NULL); + mxser_change_speed(tty, NULL); info->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&info->slock, flags); @@ -1009,8 +1012,9 @@ static int mxser_startup(struct mxser_port *info) * This routine will shutdown a serial port; interrupts maybe disabled, and * DTR is dropped if the hangup on close termio flag is on. */ -static void mxser_shutdown(struct mxser_port *info) +static void mxser_shutdown(struct tty_struct *tty) { + struct mxser_port *info = tty->driver_data; unsigned long flags; if (!(info->port.flags & ASYNC_INITIALIZED)) @@ -1035,7 +1039,7 @@ static void mxser_shutdown(struct mxser_port *info) info->IER = 0; outb(0x00, info->ioaddr + UART_IER); - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) + if (tty->termios->c_cflag & HUPCL) info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); outb(info->MCR, info->ioaddr + UART_MCR); @@ -1051,8 +1055,7 @@ static void mxser_shutdown(struct mxser_port *info) /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); + set_bit(TTY_IO_ERROR, &tty->flags); info->port.flags &= ~ASYNC_INITIALIZED; @@ -1084,14 +1087,14 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) return -ENODEV; tty->driver_data = info; - info->port.tty = tty; + tty_port_tty_set(&info->port, tty); /* * Start up serial port */ spin_lock_irqsave(&info->slock, flags); info->port.count++; spin_unlock_irqrestore(&info->slock, flags); - retval = mxser_startup(info); + retval = mxser_startup(tty); if (retval) return retval; @@ -1209,13 +1212,13 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) break; } } - mxser_shutdown(info); + mxser_shutdown(tty); mxser_flush_buffer(tty); tty_ldisc_flush(tty); tty->closing = 0; - info->port.tty = NULL; + tty_port_tty_set(&info->port, NULL); if (info->port.blocked_open) { if (info->port.close_delay) schedule_timeout_interruptible(info->port.close_delay); @@ -1337,12 +1340,13 @@ static int mxser_chars_in_buffer(struct tty_struct *tty) * friends of mxser_ioctl() * ------------------------------------------------------------ */ -static int mxser_get_serial_info(struct mxser_port *info, +static int mxser_get_serial_info(struct tty_struct *tty, struct serial_struct __user *retinfo) { + struct mxser_port *info = tty->driver_data; struct serial_struct tmp = { .type = info->type, - .line = info->port.tty->index, + .line = tty->index, .port = info->ioaddr, .irq = info->board->irq, .flags = info->port.flags, @@ -1357,9 +1361,10 @@ static int mxser_get_serial_info(struct mxser_port *info, return 0; } -static int mxser_set_serial_info(struct mxser_port *info, +static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct __user *new_info) { + struct mxser_port *info = tty->driver_data; struct serial_struct new_serial; speed_t baud; unsigned long sl_flags; @@ -1393,14 +1398,14 @@ static int mxser_set_serial_info(struct mxser_port *info, (new_serial.flags & ASYNC_FLAGS)); info->port.close_delay = new_serial.close_delay * HZ / 100; info->port.closing_wait = new_serial.closing_wait * HZ / 100; - info->port.tty->low_latency = - (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) + ? 1 : 0; if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != info->custom_divisor)) { baud = new_serial.baud_base / new_serial.custom_divisor; - tty_encode_baud_rate(info->port.tty, baud, baud); + tty_encode_baud_rate(tty, baud, baud); } } @@ -1411,11 +1416,11 @@ static int mxser_set_serial_info(struct mxser_port *info, if (info->port.flags & ASYNC_INITIALIZED) { if (flags != (info->port.flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); - mxser_change_speed(info, NULL); + mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } } else - retval = mxser_startup(info); + retval = mxser_startup(tty); return retval; } @@ -1461,7 +1466,7 @@ static int mxser_tiocmget(struct tty_struct *tty, struct file *file) spin_lock_irqsave(&info->slock, flags); status = inb(info->ioaddr + UART_MSR); if (status & UART_MSR_ANY_DELTA) - mxser_check_modem_status(info, status); + mxser_check_modem_status(tty, info, status); spin_unlock_irqrestore(&info->slock, flags); return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | @@ -1606,6 +1611,7 @@ static int __init mxser_read_register(int port, unsigned short *regs) static int mxser_ioctl_special(unsigned int cmd, void __user *argp) { struct mxser_port *port; + struct tty_struct *tty; int result, status; unsigned int i, j; int ret = 0; @@ -1643,12 +1649,14 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (!port->ioaddr) goto copy; + + tty = tty_port_tty_get(&port->port); - if (!port->port.tty || !port->port.tty->termios) + if (!tty || !tty->termios) ms.cflag = port->normal_termios.c_cflag; else - ms.cflag = port->port.tty->termios->c_cflag; - + ms.cflag = tty->termios->c_cflag; + tty_kref_put(tty); status = inb(port->ioaddr + UART_MSR); if (status & UART_MSR_DCD) ms.dcd = 1; @@ -1704,15 +1712,18 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) me->up_txcnt[p] = port->mon_data.up_txcnt; me->modem_status[p] = port->mon_data.modem_status; - me->baudrate[p] = tty_get_baud_rate(port->port.tty); + tty = tty_port_tty_get(&port->port); - if (!port->port.tty || !port->port.tty->termios) { + if (!tty || !tty->termios) { cflag = port->normal_termios.c_cflag; iflag = port->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios); } else { - cflag = port->port.tty->termios->c_cflag; - iflag = port->port.tty->termios->c_iflag; + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + me->baudrate[p] = tty_get_baud_rate(tty); } + tty_kref_put(tty); me->databits[p] = cflag & CSIZE; me->stopbits[p] = cflag & CSTOPB; @@ -1822,12 +1833,12 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case TIOCGSERIAL: lock_kernel(); - retval = mxser_get_serial_info(info, argp); + retval = mxser_get_serial_info(tty, argp); unlock_kernel(); return retval; case TIOCSSERIAL: lock_kernel(); - retval = mxser_set_serial_info(info, argp); + retval = mxser_set_serial_info(tty, argp); unlock_kernel(); return retval; case TIOCSERGETLSR: /* Get line status register */ @@ -1896,7 +1907,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, lock_kernel(); status = mxser_get_msr(info->ioaddr, 1, tty->index); - mxser_check_modem_status(info, status); + mxser_check_modem_status(tty, info, status); mcr = inb(info->ioaddr + UART_MCR); if (mcr & MOXA_MUST_MCR_XON_FLAG) @@ -1909,7 +1920,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, else info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - if (info->port.tty->hw_stopped) + if (tty->hw_stopped) info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; else info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; @@ -1958,7 +1969,7 @@ static void mxser_stoprx(struct tty_struct *tty) } } - if (info->port.tty->termios->c_cflag & CRTSCTS) { + if (tty->termios->c_cflag & CRTSCTS) { info->MCR &= ~UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -1995,7 +2006,7 @@ static void mxser_unthrottle(struct tty_struct *tty) } } - if (info->port.tty->termios->c_cflag & CRTSCTS) { + if (tty->termios->c_cflag & CRTSCTS) { info->MCR |= UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -2040,7 +2051,7 @@ static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termi unsigned long flags; spin_lock_irqsave(&info->slock, flags); - mxser_change_speed(info, old_termios); + mxser_change_speed(tty, old_termios); spin_unlock_irqrestore(&info->slock, flags); if ((old_termios->c_cflag & CRTSCTS) && @@ -2138,10 +2149,10 @@ static void mxser_hangup(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); - mxser_shutdown(info); + mxser_shutdown(tty); info->port.count = 0; info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; + tty_port_tty_set(&info->port, NULL); wake_up_interruptible(&info->port.open_wait); } @@ -2164,9 +2175,9 @@ static int mxser_rs_break(struct tty_struct *tty, int break_state) return 0; } -static void mxser_receive_chars(struct mxser_port *port, int *status) +static void mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, int *status) { - struct tty_struct *tty = port->port.tty; unsigned char ch, gdl; int ignored = 0; int cnt = 0; @@ -2174,9 +2185,8 @@ static void mxser_receive_chars(struct mxser_port *port, int *status) int max = 256; recv_room = tty->receive_room; - if ((recv_room == 0) && (!port->ldisc_stop_rx)) + if (recv_room == 0 && !port->ldisc_stop_rx) mxser_stoprx(tty); - if (port->board->chip_flag != MOXA_OTHER_UART) { if (*status & UART_LSR_SPECIAL) @@ -2253,7 +2263,7 @@ intr_old: } while (*status & UART_LSR_DR); end_intr: - mxvar_log.rxcnt[port->port.tty->index] += cnt; + mxvar_log.rxcnt[tty->index] += cnt; port->mon_data.rxcnt += cnt; port->mon_data.up_rxcnt += cnt; @@ -2267,14 +2277,14 @@ end_intr: spin_lock(&port->slock); } -static void mxser_transmit_chars(struct mxser_port *port) +static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) { int count, cnt; if (port->x_char) { outb(port->x_char, port->ioaddr + UART_TX); port->x_char = 0; - mxvar_log.txcnt[port->port.tty->index]++; + mxvar_log.txcnt[tty->index]++; port->mon_data.txcnt++; port->mon_data.up_txcnt++; port->icount.tx++; @@ -2284,8 +2294,8 @@ static void mxser_transmit_chars(struct mxser_port *port) if (port->port.xmit_buf == NULL) return; - if ((port->xmit_cnt <= 0) || port->port.tty->stopped || - (port->port.tty->hw_stopped && + if (port->xmit_cnt <= 0 || tty->stopped || + (tty->hw_stopped && (port->type != PORT_16550A) && (!port->board->chip_flag))) { port->IER &= ~UART_IER_THRI; @@ -2302,14 +2312,14 @@ static void mxser_transmit_chars(struct mxser_port *port) if (--port->xmit_cnt <= 0) break; } while (--count > 0); - mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt); + mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); port->mon_data.txcnt += (cnt - port->xmit_cnt); port->mon_data.up_txcnt += (cnt - port->xmit_cnt); port->icount.tx += (cnt - port->xmit_cnt); - if (port->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(port->port.tty); + if (port->xmit_cnt < WAKEUP_CHARS && tty) + tty_wakeup(tty); if (port->xmit_cnt <= 0) { port->IER &= ~UART_IER_THRI; @@ -2328,6 +2338,7 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id) int max, irqbits, bits, msr; unsigned int int_cnt, pass_counter = 0; int handled = IRQ_NONE; + struct tty_struct *tty; for (i = 0; i < MXSER_BOARDS; i++) if (dev_id == &mxser_boards[i]) { @@ -2360,13 +2371,15 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id) if (iir & UART_IIR_NO_INT) break; iir &= MOXA_MUST_IIR_MASK; - if (!port->port.tty || + tty = tty_port_tty_get(&port->port); + if (!tty || (port->port.flags & ASYNC_CLOSING) || !(port->port.flags & ASYNC_INITIALIZED)) { status = inb(port->ioaddr + UART_LSR); outb(0x27, port->ioaddr + UART_FCR); inb(port->ioaddr + UART_MSR); + tty_kref_put(tty); break; } @@ -2387,27 +2400,28 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id) iir == MOXA_MUST_IIR_RDA || iir == MOXA_MUST_IIR_RTO || iir == MOXA_MUST_IIR_LSR) - mxser_receive_chars(port, + mxser_receive_chars(tty, port, &status); } else { status &= port->read_status_mask; if (status & UART_LSR_DR) - mxser_receive_chars(port, + mxser_receive_chars(tty, port, &status); } msr = inb(port->ioaddr + UART_MSR); if (msr & UART_MSR_ANY_DELTA) - mxser_check_modem_status(port, msr); + mxser_check_modem_status(tty, port, msr); if (port->board->chip_flag) { if (iir == 0x02 && (status & UART_LSR_THRE)) - mxser_transmit_chars(port); + mxser_transmit_chars(tty, port); } else { if (status & UART_LSR_THRE) - mxser_transmit_chars(port); + mxser_transmit_chars(tty, port); } + tty_kref_put(tty); } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); spin_unlock(&port->slock); } -- 2.41.1