From 210e207c1d98348f5993e6f580cd20cf20086d7d Mon Sep 17 00:00:00 2001 From: Tyler Trafford Date: Mon, 9 Jan 2006 15:25:29 -0200 Subject: [PATCH] V4L/DVB (3198): make cx25840 recover from some firmware load failures - In the rare event that a 333MHz i2c firmware load fails after writing some data, this fix makes the driver reset the DL_ADDR registers to the proper values before continuing on with 100MHz transfers. Signed-off-by: Tyler Trafford Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/cx25840/cx25840-firmware.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/video/cx25840/cx25840-firmware.c b/drivers/media/video/cx25840/cx25840-firmware.c index df9d50a7554..f43024f2aae 100644 --- a/drivers/media/video/cx25840/cx25840-firmware.c +++ b/drivers/media/video/cx25840/cx25840-firmware.c @@ -15,7 +15,6 @@ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ - #include #include #include @@ -94,13 +93,23 @@ static inline int check_fw_load(struct i2c_client *client, int size) static inline int fw_write(struct i2c_client *client, u8 * data, int size) { - if (i2c_master_send(client, data, size) < size) { + int sent; + + if ((sent = i2c_master_send(client, data, size)) < size) { if (fastfw) { cx25840_err("333MHz i2c firmware load failed\n"); fastfw = 0; set_i2c_delay(client, 10); + if (sent > 2) { + u16 dl_addr = cx25840_read(client, 0x801) << 8; + dl_addr |= cx25840_read(client, 0x800); + dl_addr -= sent - 2; + cx25840_write(client, 0x801, dl_addr >> 8); + cx25840_write(client, 0x800, dl_addr & 0xff); + } + if (i2c_master_send(client, data, size) < size) { cx25840_err ("100MHz i2c firmware load failed\n"); -- 2.41.1