From 1e1b20a119ac45a290bbc6261f69a2a6a2cc064a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 9 Oct 2006 13:27:28 +1000 Subject: [PATCH] [POWERPC] Fix Maple secondary IDE interrupt The IDE driver will pick up the PCI IRQ for both channels on Maple despite the fact that it's in legacy mode. This works around it by "hiding" the PCI IRQ of the AMD8111 IDE controller when it's configured in legacy mode on the Maple platform, thus causing the driver to call pci_get_legacy_ide_irq() which will return the correct interrupts for both channels. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras --- arch/powerpc/platforms/maple/pci.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 8debae3aa3c..63b4d1bff35 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -516,8 +516,21 @@ void __init maple_pcibios_fixup(void) dev->irq = irq_create_mapping(NULL, 1); if (dev->irq != NO_IRQ) set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW); - } else - pci_read_irq_line(dev); + continue; + } + + /* Hide AMD8111 IDE interrupt when in legacy mode so + * the driver calls pci_get_legacy_ide_irq() + */ + if (dev->vendor == PCI_VENDOR_ID_AMD && + dev->device == PCI_DEVICE_ID_AMD_8111_IDE && + (dev->class & 5) != 5) { + dev->irq = NO_IRQ; + continue; + } + + /* For all others, map the interrupt from the device-tree */ + pci_read_irq_line(dev); } DBG(" <- maple_pcibios_fixup\n"); -- 2.41.1