From 0fb8ca45eb164c405eef8978f26829f9348b4d4d Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Fri, 12 Dec 2008 14:38:33 +0200 Subject: [PATCH] mac80211: Add HT rates into RX status reporting This patch adds option for HT-enabled drivers to report HT rates (HT20/HT40, short GI, MCS index) to mac80211. These rates are currently not in the rate table, so the rate_idx is used to indicate MCS index. Signed-off-by: Jouni Malinen Signed-off-by: John W. Linville --- include/net/mac80211.h | 11 +++++++-- net/mac80211/mlme.c | 7 +++++- net/mac80211/rx.c | 56 ++++++++++++++++++++++++++++++++++-------- 3 files changed, 61 insertions(+), 13 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 22ae72c58d7..9428d3e2f11 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -436,6 +436,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * is valid. This is useful in monitor mode and necessary for beacon frames * to enable IBSS merging. * @RX_FLAG_SHORTPRE: Short preamble was used for this frame + * @RX_FLAG_HT: HT MCS was used and rate_idx is MCS index + * @RX_FLAG_40MHZ: HT40 (40 MHz) was used + * @RX_FLAG_SHORT_GI: Short guard interval was used */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = 1<<0, @@ -446,7 +449,10 @@ enum mac80211_rx_flags { RX_FLAG_FAILED_FCS_CRC = 1<<5, RX_FLAG_FAILED_PLCP_CRC = 1<<6, RX_FLAG_TSFT = 1<<7, - RX_FLAG_SHORTPRE = 1<<8 + RX_FLAG_SHORTPRE = 1<<8, + RX_FLAG_HT = 1<<9, + RX_FLAG_40MHZ = 1<<10, + RX_FLAG_SHORT_GI = 1<<11, }; /** @@ -466,7 +472,8 @@ enum mac80211_rx_flags { * @noise: noise when receiving this frame, in dBm. * @qual: overall signal quality indication, in percent (0-100). * @antenna: antenna used - * @rate_idx: index of data rate into band's supported rates + * @rate_idx: index of data rate into band's supported rates or MCS index if + * HT rates are use (RX_FLAG_HT) * @flag: %RX_FLAG_* */ struct ieee80211_rx_status { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e4d1fca5c72..a444b38f490 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1613,8 +1613,13 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, * e.g: at 1 MBit that means mactime is 192 usec earlier * (=24 bytes * 8 usecs/byte) than the beacon timestamp. */ - int rate = local->hw.wiphy->bands[band]-> + int rate; + if (rx_status->flag & RX_FLAG_HT) { + rate = 65; /* TODO: HT rates */ + } else { + rate = local->hw.wiphy->bands[band]-> bitrates[rx_status->rate_idx].bitrate; + } rx_timestamp = rx_status->mactime + (24 * 8 * 10 / rate); } else if (local && local->ops && local->ops->get_tsf) /* second best option: get current TSF */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 73cf126cef4..b729c005a2b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -149,7 +149,17 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, pos++; /* IEEE80211_RADIOTAP_RATE */ - *pos = rate->bitrate / 5; + if (status->flag & RX_FLAG_HT) { + /* + * TODO: add following information into radiotap header once + * suitable fields are defined for it: + * - MCS index (status->rate_idx) + * - HT40 (status->flag & RX_FLAG_40MHZ) + * - short-GI (status->flag & RX_FLAG_SHORT_GI) + */ + *pos = 0; + } else + *pos = rate->bitrate / 5; pos++; /* IEEE80211_RADIOTAP_CHANNEL */ @@ -1849,9 +1859,15 @@ static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata, if (!(sdata->dev->flags & IFF_PROMISC)) return 0; rx->flags &= ~IEEE80211_RX_RA_MATCH; - } else if (!rx->sta) + } else if (!rx->sta) { + int rate_idx; + if (rx->status->flag & RX_FLAG_HT) + rate_idx = 0; /* TODO: HT rates */ + else + rate_idx = rx->status->rate_idx; rx->sta = ieee80211_ibss_add_sta(sdata, bssid, hdr->addr2, - BIT(rx->status->rate_idx)); + BIT(rate_idx)); + } break; case NL80211_IFTYPE_MESH_POINT: if (!multicast && @@ -2057,7 +2073,13 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, tid_agg_rx->reorder_buf[index]->cb, sizeof(status)); sband = local->hw.wiphy->bands[status.band]; - rate = &sband->bitrates[status.rate_idx]; + if (status.flag & RX_FLAG_HT) { + /* TODO: HT rates */ + rate = sband->bitrates; + } else { + rate = &sband->bitrates + [status.rate_idx]; + } __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], &status, rate); @@ -2101,7 +2123,10 @@ static u8 ieee80211_sta_manage_reorder_buf(struct ieee80211_hw *hw, memcpy(&status, tid_agg_rx->reorder_buf[index]->cb, sizeof(status)); sband = local->hw.wiphy->bands[status.band]; - rate = &sband->bitrates[status.rate_idx]; + if (status.flag & RX_FLAG_HT) + rate = sband->bitrates; /* TODO: HT rates */ + else + rate = &sband->bitrates[status.rate_idx]; __ieee80211_rx_handle_packet(hw, tid_agg_rx->reorder_buf[index], &status, rate); tid_agg_rx->stored_mpdu_num--; @@ -2189,15 +2214,26 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb, } sband = local->hw.wiphy->bands[status->band]; - - if (!sband || - status->rate_idx < 0 || - status->rate_idx >= sband->n_bitrates) { + if (!sband) { WARN_ON(1); return; } - rate = &sband->bitrates[status->rate_idx]; + if (status->flag & RX_FLAG_HT) { + /* rate_idx is MCS index */ + if (WARN_ON(status->rate_idx < 0 || + status->rate_idx >= 76)) + return; + /* HT rates are not in the table - use the highest legacy rate + * for now since other parts of mac80211 may not yet be fully + * MCS aware. */ + rate = &sband->bitrates[sband->n_bitrates - 1]; + } else { + if (WARN_ON(status->rate_idx < 0 || + status->rate_idx >= sband->n_bitrates)) + return; + rate = &sband->bitrates[status->rate_idx]; + } /* * key references and virtual interfaces are protected using RCU -- 2.41.1