From 044979827eda13675abab99879ebe3ea535d59fa Mon Sep 17 00:00:00 2001 From: Divy Le Ray Date: Wed, 8 Oct 2008 17:38:29 -0700 Subject: [PATCH] cxgb3: simplify port type struct and usage Second step in overall phy layer reorganization. Clean up the port_type_info structure. Support coextistence of clause 22 and clause 45 MDIO devices. Select the type of MDIO transaction on a per transaction basis. Signed-off-by: Divy Le Ray Signed-off-by: David S. Miller --- drivers/net/cxgb3/adapter.h | 2 +- drivers/net/cxgb3/ael1002.c | 16 +++- drivers/net/cxgb3/common.h | 21 ++---- drivers/net/cxgb3/cxgb3_main.c | 4 +- drivers/net/cxgb3/t3_hw.c | 133 +++++++++++++++++---------------- drivers/net/cxgb3/vsc8211.c | 5 +- 6 files changed, 94 insertions(+), 87 deletions(-) diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h index 02dd69b90ab..455ef529cd6 100644 --- a/drivers/net/cxgb3/adapter.h +++ b/drivers/net/cxgb3/adapter.h @@ -54,7 +54,6 @@ struct port_info { struct adapter *adapter; struct vlan_group *vlan_grp; struct sge_qset *qs; - const struct port_type_info *port_type; u8 port_id; u8 rx_csum_offload; u8 nqsets; @@ -282,6 +281,7 @@ int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb); void t3_os_ext_intr_handler(struct adapter *adapter); void t3_os_link_changed(struct adapter *adapter, int port_id, int link_status, int speed, int duplex, int fc); +void t3_os_phymod_changed(struct adapter *adap, int port_id); void t3_sge_start(struct adapter *adap); void t3_sge_stop(struct adapter *adap); diff --git a/drivers/net/cxgb3/ael1002.c b/drivers/net/cxgb3/ael1002.c index bf22e56429f..f4e046e32fc 100644 --- a/drivers/net/cxgb3/ael1002.c +++ b/drivers/net/cxgb3/ael1002.c @@ -122,7 +122,9 @@ static struct cphy_ops ael1002_ops = { int t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops); + cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE, + "10GBASE-R"); ael100x_txon(phy); return 0; } @@ -178,7 +180,9 @@ static struct cphy_ops ael1006_ops = { int t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops); + cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_FIBRE, + "10GBASE-SR"); ael100x_txon(phy); return 0; } @@ -198,7 +202,9 @@ int t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, { unsigned int stat; - cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops); + cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP, + "10GBASE-CX4"); /* * Some cards where the PHY is supposed to be at address 0 actually @@ -256,6 +262,8 @@ static struct cphy_ops xaui_direct_ops = { int t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops); + cphy_init(phy, adapter, phy_addr, &xaui_direct_ops, mdio_ops, + SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_TP, + "10GBASE-CX4"); return 0; } diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h index 78c10d3f0ef..e83a360bcc9 100644 --- a/drivers/net/cxgb3/common.h +++ b/drivers/net/cxgb3/common.h @@ -193,8 +193,6 @@ struct mdio_ops { struct adapter_info { unsigned char nports; /* # of ports */ unsigned char phy_base_addr; /* MDIO PHY base address */ - unsigned char mdien; - unsigned char mdiinv; unsigned int gpio_out; /* GPIO output settings */ unsigned int gpio_intr; /* GPIO IRQ enable mask */ unsigned long caps; /* adapter capabilities */ @@ -202,13 +200,6 @@ struct adapter_info { const char *desc; /* product description */ }; -struct port_type_info { - int (*phy_prep)(struct cphy *phy, struct adapter *adapter, - int phy_addr, const struct mdio_ops *ops); - unsigned int caps; - const char *desc; -}; - struct mc5_stats { unsigned long parity_err; unsigned long active_rgn_full; @@ -548,7 +539,6 @@ enum { /* PHY operations */ struct cphy_ops { - void (*destroy)(struct cphy *phy); int (*reset)(struct cphy *phy, int wait); int (*intr_enable)(struct cphy *phy); @@ -569,8 +559,10 @@ struct cphy_ops { /* A PHY instance */ struct cphy { - int addr; /* PHY address */ + int addr; /* PHY address */ + unsigned int caps; /* PHY capabilities */ struct adapter *adapter; /* associated adapter */ + const char *desc; /* PHY description */ unsigned long fifo_errors; /* FIFO over/under-flows */ const struct cphy_ops *ops; /* PHY operations */ int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr, @@ -595,10 +587,13 @@ static inline int mdio_write(struct cphy *phy, int mmd, int reg, /* Convenience initializer */ static inline void cphy_init(struct cphy *phy, struct adapter *adapter, int phy_addr, struct cphy_ops *phy_ops, - const struct mdio_ops *mdio_ops) + const struct mdio_ops *mdio_ops, + unsigned int caps, const char *desc) { - phy->adapter = adapter; phy->addr = phy_addr; + phy->caps = caps; + phy->adapter = adapter; + phy->desc = desc; phy->ops = phy_ops; if (mdio_ops) { phy->mdio_read = mdio_ops->read; diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index fea2c719c8f..5b8251decbd 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2368,7 +2368,7 @@ static void check_link_status(struct adapter *adapter) struct net_device *dev = adapter->port[i]; struct port_info *p = netdev_priv(dev); - if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev)) + if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) t3_link_changed(adapter, i); } } @@ -2731,7 +2731,7 @@ static void __devinit print_port_info(struct adapter *adap, if (!test_bit(i, &adap->registered_device_map)) continue; printk(KERN_INFO "%s: %s %s %sNIC (rev %d) %s%s\n", - dev->name, ai->desc, pi->port_type->desc, + dev->name, ai->desc, pi->phy.desc, is_offload(adap) ? "R" : "", adap->params.rev, buf, (adap->flags & USING_MSIX) ? " MSI-X" : (adap->flags & USING_MSI) ? " MSI" : ""); diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index fa0a4b4fb5c..f7ced324227 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -194,21 +194,18 @@ int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n, static void mi1_init(struct adapter *adap, const struct adapter_info *ai) { u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1; - u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) | - V_CLKDIV(clkdiv); + u32 val = F_PREEN | V_CLKDIV(clkdiv); - if (!(ai->caps & SUPPORTED_10000baseT_Full)) - val |= V_ST(1); t3_write_reg(adap, A_MI1_CFG, val); } -#define MDIO_ATTEMPTS 10 +#define MDIO_ATTEMPTS 20 /* - * MI1 read/write operations for direct-addressed PHYs. + * MI1 read/write operations for clause 22 PHYs. */ -static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr, - int reg_addr, unsigned int *valp) +static int t3_mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr, unsigned int *valp) { int ret; u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr); @@ -217,16 +214,17 @@ static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr, return -EINVAL; mutex_lock(&adapter->mdio_lock); + t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1)); t3_write_reg(adapter, A_MI1_ADDR, addr); t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2)); - ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10); if (!ret) *valp = t3_read_reg(adapter, A_MI1_DATA); mutex_unlock(&adapter->mdio_lock); return ret; } -static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr, +static int t3_mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr, int reg_addr, unsigned int val) { int ret; @@ -236,19 +234,37 @@ static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr, return -EINVAL; mutex_lock(&adapter->mdio_lock); + t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), V_ST(1)); t3_write_reg(adapter, A_MI1_ADDR, addr); t3_write_reg(adapter, A_MI1_DATA, val); t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1)); - ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 10); mutex_unlock(&adapter->mdio_lock); return ret; } static const struct mdio_ops mi1_mdio_ops = { - mi1_read, - mi1_write + t3_mi1_read, + t3_mi1_write }; +/* + * Performs the address cycle for clause 45 PHYs. + * Must be called with the MDIO_LOCK held. + */ +static int mi1_wr_addr(struct adapter *adapter, int phy_addr, int mmd_addr, + int reg_addr) +{ + u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr); + + t3_set_reg_field(adapter, A_MI1_CFG, V_ST(M_ST), 0); + t3_write_reg(adapter, A_MI1_ADDR, addr); + t3_write_reg(adapter, A_MI1_DATA, reg_addr); + t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0)); + return t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, + MDIO_ATTEMPTS, 10); +} + /* * MI1 read/write operations for indirect-addressed PHYs. */ @@ -256,17 +272,13 @@ static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr, int reg_addr, unsigned int *valp) { int ret; - u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr); mutex_lock(&adapter->mdio_lock); - t3_write_reg(adapter, A_MI1_ADDR, addr); - t3_write_reg(adapter, A_MI1_DATA, reg_addr); - t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0)); - ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr); if (!ret) { t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3)); ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, - MDIO_ATTEMPTS, 20); + MDIO_ATTEMPTS, 10); if (!ret) *valp = t3_read_reg(adapter, A_MI1_DATA); } @@ -278,18 +290,14 @@ static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr, int reg_addr, unsigned int val) { int ret; - u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr); mutex_lock(&adapter->mdio_lock); - t3_write_reg(adapter, A_MI1_ADDR, addr); - t3_write_reg(adapter, A_MI1_DATA, reg_addr); - t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0)); - ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20); + ret = mi1_wr_addr(adapter, phy_addr, mmd_addr, reg_addr); if (!ret) { t3_write_reg(adapter, A_MI1_DATA, val); t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1)); ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, - MDIO_ATTEMPTS, 20); + MDIO_ATTEMPTS, 10); } mutex_unlock(&adapter->mdio_lock); return ret; @@ -435,22 +443,22 @@ int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex) } static const struct adapter_info t3_adap_info[] = { - {2, 0, 0, 0, + {2, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5, 0, &mi1_mdio_ops, "Chelsio PE9000"}, - {2, 0, 0, 0, + {2, 0, F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5, 0, &mi1_mdio_ops, "Chelsio T302"}, - {1, 0, 0, 0, + {1, 0, F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0, SUPPORTED_10000baseT_Full | SUPPORTED_AUI, &mi1_mdio_ext_ops, "Chelsio T310"}, - {2, 0, 0, 0, + {2, 0, F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL | F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0, @@ -467,29 +475,23 @@ const struct adapter_info *t3_get_adapter_info(unsigned int id) return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL; } -#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \ - SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII) -#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI) +struct port_type_info { + int (*phy_prep)(struct cphy *phy, struct adapter *adapter, + int phy_addr, const struct mdio_ops *ops); +}; static const struct port_type_info port_types[] = { - {NULL}, - {t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE, - "10GBASE-XR"}, - {t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ, - "10/100/1000BASE-T"}, - {NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ, - "10/100/1000BASE-T"}, - {t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, - {NULL, CAPS_10G, "10GBASE-KX4"}, - {t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, - {t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE, - "10GBASE-SR"}, - {NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"}, + { NULL }, + { t3_ael1002_phy_prep }, + { t3_vsc8211_phy_prep }, + { NULL}, + { t3_xaui_direct_phy_prep }, + { NULL }, + { t3_qt2045_phy_prep }, + { t3_ael1006_phy_prep }, + { NULL }, }; -#undef CAPS_1G -#undef CAPS_10G - #define VPD_ENTRY(name, len) \ u8 name##_kword[2]; u8 name##_len; u8 name##_data[len] @@ -1691,7 +1693,7 @@ int t3_phy_intr_handler(struct adapter *adapter) mask = gpi - (gpi & (gpi - 1)); gpi -= mask; - if (!(p->port_type->caps & SUPPORTED_IRQ)) + if (!(p->phy.caps & SUPPORTED_IRQ)) continue; if (cause & mask) { @@ -3556,7 +3558,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, int reset) { int ret; - unsigned int i, j = 0; + unsigned int i, j = -1; get_pci_mode(adapter, &adapter->params.pci); @@ -3620,19 +3622,18 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, for_each_port(adapter, i) { u8 hw_addr[6]; + const struct port_type_info *pti; struct port_info *p = adap2pinfo(adapter, i); - while (!adapter->params.vpd.port_type[j]) - ++j; + while (!adapter->params.vpd.port_type[++j]) + ; - p->port_type = &port_types[adapter->params.vpd.port_type[j]]; - ret = p->port_type->phy_prep(&p->phy, adapter, - ai->phy_base_addr + j, - ai->mdio_ops); + pti = &port_types[adapter->params.vpd.port_type[j]]; + ret = pti->phy_prep(&p->phy, adapter, ai->phy_base_addr + j, + ai->mdio_ops); if (ret) return ret; mac_prep(&p->mac, adapter, j); - ++j; /* * The VPD EEPROM stores the base Ethernet address for the @@ -3646,9 +3647,9 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, ETH_ALEN); memcpy(adapter->port[i]->perm_addr, hw_addr, ETH_ALEN); - init_link_config(&p->link_config, p->port_type->caps); + init_link_config(&p->link_config, p->phy.caps); p->phy.ops->power_down(&p->phy, 1); - if (!(p->port_type->caps & SUPPORTED_IRQ)) + if (!(p->phy.caps & SUPPORTED_IRQ)) adapter->params.linkpoll_period = 10; } @@ -3664,7 +3665,7 @@ void t3_led_ready(struct adapter *adapter) int t3_replay_prep_adapter(struct adapter *adapter) { const struct adapter_info *ai = adapter->params.info; - unsigned int i, j = 0; + unsigned int i, j = -1; int ret; early_hw_init(adapter, ai); @@ -3673,17 +3674,17 @@ int t3_replay_prep_adapter(struct adapter *adapter) return ret; for_each_port(adapter, i) { + const struct port_type_info *pti; struct port_info *p = adap2pinfo(adapter, i); - while (!adapter->params.vpd.port_type[j]) - ++j; - ret = p->port_type->phy_prep(&p->phy, adapter, - ai->phy_base_addr + j, - ai->mdio_ops); + while (!adapter->params.vpd.port_type[++j]) + ; + + pti = &port_types[adapter->params.vpd.port_type[j]]; + ret = pti->phy_prep(&p->phy, adapter, p->phy.addr, NULL); if (ret) return ret; p->phy.ops->power_down(&p->phy, 1); - ++j; } return 0; diff --git a/drivers/net/cxgb3/vsc8211.c b/drivers/net/cxgb3/vsc8211.c index 8f1b0d3a27e..68e6334c206 100644 --- a/drivers/net/cxgb3/vsc8211.c +++ b/drivers/net/cxgb3/vsc8211.c @@ -224,6 +224,9 @@ static struct cphy_ops vsc8211_ops = { int t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr, const struct mdio_ops *mdio_ops) { - cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops); + cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops, + SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII | + SUPPORTED_TP | SUPPORTED_IRQ, "10/100/1000BASE-T"); return 0; } -- 2.41.1