From 00f42eabb204c68fa64ef72de834e74aca15c81f Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Fri, 2 May 2008 02:11:45 -0400 Subject: [PATCH] sata_mv rearrange mv_config_fbs Rearrange mv_config_fbs() to more closely follow the (corrected) datasheet recommendations for NCQ and FIS-based switching (FBS). Also, maintain a port flag to let us know when FBS is enabled. We will make more use of that flag later in this patch series. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 60 ++++++++++++++++++++++++++++--------------- 1 file changed, 39 insertions(+), 21 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fbccf215d50..e4d411cec79 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -366,6 +366,7 @@ enum { /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ MV_PP_FLAG_NCQ_EN = (1 << 1), /* is EDMA set up for NCQ? */ + MV_PP_FLAG_FBS_EN = (1 << 2), /* is EDMA set up for FBS? */ }; #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) @@ -1129,26 +1130,31 @@ static int mv_qc_defer(struct ata_queued_cmd *qc) return ATA_DEFER_PORT; } -static void mv_config_fbs(void __iomem *port_mmio, int enable_fbs) +static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs) { - u32 old_fiscfg, new_fiscfg, old_ltmode, new_ltmode; - /* - * Various bit settings required for operation - * in FIS-based switching (fbs) mode on GenIIe: - */ - old_fiscfg = readl(port_mmio + FISCFG_OFS); - old_ltmode = readl(port_mmio + LTMODE_OFS); - if (enable_fbs) { - new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode | LTMODE_BIT8; - } else { /* disable fbs */ - new_fiscfg = old_fiscfg & ~FISCFG_SINGLE_SYNC; - new_ltmode = old_ltmode & ~LTMODE_BIT8; + u32 new_fiscfg, old_fiscfg; + u32 new_ltmode, old_ltmode; + u32 new_haltcond, old_haltcond; + + old_fiscfg = readl(port_mmio + FISCFG_OFS); + old_ltmode = readl(port_mmio + LTMODE_OFS); + old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS); + + new_fiscfg = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR); + new_ltmode = old_ltmode & ~LTMODE_BIT8; + new_haltcond = old_haltcond | EDMA_ERR_DEV; + + if (want_fbs) { + new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC; + new_ltmode = old_ltmode | LTMODE_BIT8; } + if (new_fiscfg != old_fiscfg) writelfl(new_fiscfg, port_mmio + FISCFG_OFS); if (new_ltmode != old_ltmode) writelfl(new_ltmode, port_mmio + LTMODE_OFS); + if (new_haltcond != old_haltcond) + writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS); } static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq) @@ -1175,6 +1181,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) /* set up non-NCQ EDMA configuration */ cfg = EDMA_CFG_Q_DEPTH; /* always 0x1f for *all* chips */ + pp->pp_flags &= ~MV_PP_FLAG_FBS_EN; if (IS_GEN_I(hpriv)) cfg |= (1 << 8); /* enab config burst size mask */ @@ -1184,19 +1191,30 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) mv_60x1_errata_sata25(ap, want_ncq); } else if (IS_GEN_IIE(hpriv)) { + int want_fbs = sata_pmp_attached(ap); + /* + * Possible future enhancement: + * + * The chip can use FBS with non-NCQ, if we allow it, + * But first we need to have the error handling in place + * for this mode (datasheet section 7.3.15.4.2.3). + * So disallow non-NCQ FBS for now. + */ + want_fbs &= want_ncq; + + mv_config_fbs(port_mmio, want_ncq, want_fbs); + + if (want_fbs) { + pp->pp_flags |= MV_PP_FLAG_FBS_EN; + cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */ + } + cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ if (HAS_PCI(ap->host)) cfg |= (1 << 18); /* enab early completion */ if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ - - if (want_ncq && sata_pmp_attached(ap)) { - cfg |= EDMA_CFG_EDMA_FBS; /* FIS-based switching */ - mv_config_fbs(port_mmio, 1); - } else { - mv_config_fbs(port_mmio, 0); - } } if (want_ncq) { -- 2.41.1