]> pilppa.com Git - linux-2.6-omap-h63xx.git/log
linux-2.6-omap-h63xx.git
16 years agosata_mv: platform driver allocs dma without create
Byron Bradley [Sun, 10 Feb 2008 21:17:30 +0000 (21:17 +0000)]
sata_mv: platform driver allocs dma without create

When the sata_mv driver is used as a platform driver,
mv_create_dma_pools() is never called so it fails when trying
to alloc in mv_pool_start().

Signed-off-by: Byron Bradley <byron.bbradley@gmail.com>
Acked-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_ninja32: setup changes
Alan Cox [Fri, 8 Feb 2008 15:25:10 +0000 (15:25 +0000)]
pata_ninja32: setup changes

Forcibly set more of the configuration at init time. This seems to fix at
least one problem reported. We don't know what most of these bits do, but
we do know what windows stuffs there.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_legacy: typo fix
Alan Cox [Fri, 8 Feb 2008 15:23:38 +0000 (15:23 +0000)]
pata_legacy: typo fix

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_amd: Note in the module description it handles Nvidia
Alan Cox [Fri, 8 Feb 2008 15:22:39 +0000 (15:22 +0000)]
pata_amd: Note in the module description it handles Nvidia

This has confused a few people so fix it

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agosata_mv: fix loop with last port
Yinghai Lu [Thu, 7 Feb 2008 23:06:17 +0000 (15:06 -0800)]
sata_mv: fix loop with last port

commit f351b2d638c3cb0b95adde3549b7bfaf3f991dfa
        sata_mv: Support SoC controllers

cause panic:

scsi 4:0:0:0: Direct-Access     ATA      HITACHI HDS7225S V44O PQ: 0 ANSI: 5
sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sde] 488390625 512-byte hardware sectors (250056 MB)
sd 4:0:0:0: [sde] Write Protect is off
sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sde:<1>BUG: unable to handle kernel NULL pointer dereference at 000000000000001a
IP: [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
PGD 0
Oops: 0000 [1] SMP
CPU 3
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.24-smp-08636-g0afc2ed-dirty #26
RIP: 0010:[<ffffffff806262c7>]  [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
RSP: 0000:ffff8102050bbec8  EFLAGS: 00010297
RAX: 0000000000000008 RBX: 0000000000000000 RCX: 0000000000000003
RDX: 0000000000008000 RSI: 0000000000000286 RDI: ffff8102035180e0
RBP: 0000000000000001 R08: 0000000000000003 R09: ffff8102036613e0
R10: 0000000000000002 R11: ffffffff8061474c R12: ffff8102035bf828
R13: 0000000000000008 R14: ffff81020348ece8 R15: ffffc20002cb2000
FS:  0000000000000000(0000) GS:ffff810405025700(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 000000000000001a CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 0, threadinfo ffff810405094000, task ffff8102050b28c0)
Stack:  000000010000000c 0002040000220400 0000001100000002 ffff81020348eda8
 0000000000000001 ffff8102035f2cc0 0000000000000000 0000000000000000
 0000000000000018 0000000000000000 0000000000000000 ffffffff80269ee8
Call Trace:
 <IRQ>  [<ffffffff80269ee8>] ? handle_IRQ_event+0x25/0x53
 [<ffffffff8026b393>] ? handle_fasteoi_irq+0x90/0xc8
 [<ffffffff802218e2>] ? do_IRQ+0xf1/0x15f
 [<ffffffff8021df24>] ? default_idle+0x0/0x55
 [<ffffffff8021f361>] ? ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff8023010c>] ? lapic_next_event+0x0/0xa
 [<ffffffff8021df55>] ? default_idle+0x31/0x55
 [<ffffffff8021df50>] ? default_idle+0x2c/0x55
 [<ffffffff8021df24>] ? default_idle+0x0/0x55
 [<ffffffff8021e00b>] ? cpu_idle+0x92/0xb8

Code: 41 14 85 c0 89 44 24 14 0f 84 9d 02 00 00 f7 d0 01 d6 41 89 d5 89 41 14 8b 41 14 89 34 24 e9 7e 02 00 00 49 63 c5 49 8b 5c c6 48 <f6> 43 1a 80 4c 8b a3 20 37 00 00 0f 85 62 02 00 00 31 c9 41 83
RIP  [<ffffffff806262c7>] mv_interrupt+0x21c/0x4cc
 RSP <ffff8102050bbec8>
CR2: 000000000000001a
---[ end trace 2583b5f7a5350584 ]---
Kernel panic - not syncing: Aiee, killing interrupt handler!

last_port already include port0 base.
this patch change use last_port directly, and move pp assignment later.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agolibata: ignore deverr on SETXFER if mode is configured
Tejun Heo [Thu, 7 Feb 2008 01:34:08 +0000 (10:34 +0900)]
libata: ignore deverr on SETXFER if mode is configured

Some controllers (VIA CX700) raise device error on SETXFER even after
mode configuration succeeded.  Update ata_dev_set_mode() such that
device error is ignored if transfer mode is configured correctly.  To
implement this, device is revalidated even after device error on
SETXFER.

This fixes kernel bugzilla bug 8563.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agopata_via: fix SATA cable detection on cx700
Tejun Heo [Thu, 7 Feb 2008 01:18:53 +0000 (10:18 +0900)]
pata_via: fix SATA cable detection on cx700

The first port of cx700 is SATA.  Fix cable detection.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
16 years agoLinux 2.6.25-rc1 v2.6.25-rc1
Linus Torvalds [Sun, 10 Feb 2008 22:18:14 +0000 (14:18 -0800)]
Linux 2.6.25-rc1

.. and I really need to call it something else.  Maybe it is time to
bring back the weasel series, since weasels always make me feel good
about a kernel.

16 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 10 Feb 2008 22:09:44 +0000 (14:09 -0800)]
Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  [ARM] constify function pointer tables
  [ARM] 4823/1: AT91 section fix
  [ARM] 4824/1: pxa: clear RDH bit after any reset
  [ARM] pxa: remove debugging PM: printk
  ARM: OMAP1: Misc clean-up
  ARM: OMAP1: Update defconfigs for omap1
  ARM: OMAP1: Palm Tungsten E board clean-up
  ARM: OMAP1: Use I2C bus registration helper for omap1
  ARM: OMAP1: Remove omap_sram_idle()
  ARM: OMAP1: PM fixes for OMAP1
  ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  ARM: OMAP1: Make omap1 use MMC multislot structures
  ARM: OMAP1: Change the comments to C style
  ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
  ARM: OMAP: Add helper module for board specific I2C bus registration
  ARM: OMAP: Add dmtimer support for OMAP3
  ARM: OMAP: Pre-3430 clean-up for dmtimer.c
  ARM: OMAP: Add DMA support for chaining and 3430
  ARM: OMAP: Add 24xx GPIO debounce support
  ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
  ...

16 years agoChange pci_raw_ops to pci_raw_read/write
Matthew Wilcox [Sun, 10 Feb 2008 14:45:28 +0000 (09:45 -0500)]
Change pci_raw_ops to pci_raw_read/write

We want to allow different implementations of pci_raw_ops for standard
and extended config space on x86.  Rather than clutter generic code with
knowledge of this, we make pci_raw_ops private to x86 and use it to
implement the new raw interface -- raw_pci_read() and raw_pci_write().

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoPCI x86: always use conf1 to access config space below 256 bytes
Ivan Kokshaysky [Mon, 14 Jan 2008 22:31:09 +0000 (17:31 -0500)]
PCI x86: always use conf1 to access config space below 256 bytes

Thanks to Loic Prylli <loic@myri.com>, who originally proposed
this idea.

Always using legacy configuration mechanism for the legacy config space
and extended mechanism (mmconf) for the extended config space is
a simple and very logical approach. It's supposed to resolve all
known mmconf problems. It still allows per-device quirks (tweaking
dev->cfg_size). It also allows to get rid of mmconf fallback code.

Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 10 Feb 2008 20:03:57 +0000 (12:03 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  [PKT_SCHED] ematch: Fix build warning.

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt
Linus Torvalds [Sun, 10 Feb 2008 20:02:45 +0000 (12:02 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt

* git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-hrt:
  hrtimer: don't modify restart_block->fn in restart functions
  hrtimer: fix *rmtp/restarts handling in compat_sys_nanosleep()
  hrtimer: fix *rmtp handling in hrtimer_nanosleep()
  ntp: correct inconsistent interval/tick_length usage

16 years agosplice: fix user pointer access in get_iovec_page_array()
Bastian Blank [Sun, 10 Feb 2008 14:47:57 +0000 (16:47 +0200)]
splice: fix user pointer access in get_iovec_page_array()

Commit 8811930dc74a503415b35c4a79d14fb0b408a361 ("splice: missing user
pointer access verification") added the proper access_ok() calls to
copy_from_user_mmap_sem() which ensures we can copy the struct iovecs
from userspace to the kernel.

But we also must check whether we can access the actual memory region
pointed to by the struct iovec to fix the access checks properly.

Signed-off-by: Bastian Blank <waldi@debian.org>
Acked-by: Oliver Pinter <oliver.pntr@gmail.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[PKT_SCHED] ematch: Fix build warning.
David S. Miller [Sun, 10 Feb 2008 11:48:15 +0000 (03:48 -0800)]
[PKT_SCHED] ematch: Fix build warning.

Commit 954415e33ed6cfa932c13e8c2460bd05e50723b5 ("[PKT_SCHED] ematch:
tcf_em_destroy robustness") removed a cast on em->data when
passing it to kfree(), but em->data is an integer type that can
hold pointers as well as other values so the cast is necessary.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agohrtimer: don't modify restart_block->fn in restart functions
Oleg Nesterov [Fri, 1 Feb 2008 17:41:30 +0000 (20:41 +0300)]
hrtimer: don't modify restart_block->fn in restart functions

hrtimer_nanosleep_restart() clears/restores restart_block->fn. This is
pointless and complicates its usage. Note that if sys_restart_syscall()
doesn't actually happen, we have a bogus "pending" restart->fn anyway,
this is harmless.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Pavel Emelyanov <xemul@sw.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agohrtimer: fix *rmtp/restarts handling in compat_sys_nanosleep()
Oleg Nesterov [Fri, 1 Feb 2008 17:35:31 +0000 (20:35 +0300)]
hrtimer: fix *rmtp/restarts handling in compat_sys_nanosleep()

Spotted by Pavel Emelyanov and Alexey Dobriyan.

compat_sys_nanosleep() implicitly uses hrtimer_nanosleep_restart(), this can't
work. Make a suitable compat_nanosleep_restart() helper.

Introduced by commit c70878b4e0b6cf8d2f1e46319e48e821ef4a8aba
hrtimer: hook compat_sys_nanosleep up to high res timer code

Also, set ->addr_limit = KERNEL_DS before doing hrtimer_nanosleep(), this func
was changed by the previous patch and now takes the "__user *" parameter.

Thanks to Ingo Molnar for fixing the bug in this patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Pavel Emelyanov <xemul@sw.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Toyo Abe <toyoa@mvista.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agohrtimer: fix *rmtp handling in hrtimer_nanosleep()
Oleg Nesterov [Fri, 1 Feb 2008 14:29:05 +0000 (17:29 +0300)]
hrtimer: fix *rmtp handling in hrtimer_nanosleep()

Spotted by Pavel Emelyanov and Alexey Dobriyan.

hrtimer_nanosleep() sets restart_block->arg1 = rmtp, but this rmtp points to
the local variable which lives in the caller's stack frame. This means that
if sys_restart_syscall() actually happens and it is interrupted as well, we
don't update the user-space variable, but write into the already dead stack
frame.

Introduced by commit 04c227140fed77587432667a574b14736a06dd7f
hrtimer: Rework hrtimer_nanosleep to make sys_compat_nanosleep easier

Change the callers to pass "__user *rmtp" to hrtimer_nanosleep(), and change
hrtimer_nanosleep() to use copy_to_user() to actually update *rmtp.

Small problem remains. man 2 nanosleep states that *rtmp should be written if
nanosleep() was interrupted (it says nothing whether it is OK to update *rmtp
if nanosleep returns 0), but (with or without this patch) we can dirty *rem
even if nanosleep() returns 0.

NOTE: this patch doesn't change compat_sys_nanosleep(), because it has other
bugs. Fixed by the next patch.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Alexey Dobriyan <adobriyan@sw.ru>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Pavel Emelyanov <xemul@sw.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Toyo Abe <toyoa@mvista.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
 include/linux/hrtimer.h |    2 -
 kernel/hrtimer.c        |   51 +++++++++++++++++++++++++-----------------------
 kernel/posix-timers.c   |   14 +------------
 3 files changed, 30 insertions(+), 37 deletions(-)

16 years agontp: correct inconsistent interval/tick_length usage
john stultz [Sun, 10 Feb 2008 09:48:03 +0000 (10:48 +0100)]
ntp: correct inconsistent interval/tick_length usage

clocksource initialization and error accumulation.  This corrects a 280ppm
drift seen on some systems using acpi_pm, and affects other clocksources as
well (likely to a lesser degree).

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 10 Feb 2008 08:04:35 +0000 (00:04 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits)
  [NET_SCHED] sch_htb: htb_requeue fix
  [IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric.
  starfire: secton fix
  via-velocity: section fix
  natsemi: section fix
  typhoon: section fix
  isdn: fix section mismatch warning for ISACVer
  isdn: fix section mismatch warnings from hisax_cs_setup_card
  isdn: fix section mismatch warnings in isac.c and isar.c
  isdn: fix section mismatch warning in hfc_sx.c
  [PKT_SCHED] ematch: tcf_em_destroy robustness
  [PKT_SCHED]: deinline functions in meta match
  [SCTP]: Convert sctp_dbg_objcnt to seq files.
  [SCTP]: Use snmp_fold_field instead of a homebrew analogue.
  [IGMP]: Optimize kfree_skb in igmp_rcv.
  [KEY]: Convert net/pfkey to use seq files.
  [KEY]: Clean up proc files creation a bit.
  pppol2tp: fix printk warnings
  bnx2: section fix
  bnx2x: section fix
  ...

16 years ago[NET_SCHED] sch_htb: htb_requeue fix
Jarek Poplawski [Sun, 10 Feb 2008 07:44:00 +0000 (23:44 -0800)]
[NET_SCHED] sch_htb: htb_requeue fix

htb_requeue() enqueues skbs for which htb_classify() returns NULL.
This is wrong because such skbs could be handled by NET_CLS_ACT code,
and the decision could be different than earlier in htb_enqueue().
So htb_requeue() is changed to work and look more like htb_enqueue().

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric.
Rami Rosen [Sun, 10 Feb 2008 07:43:11 +0000 (23:43 -0800)]
[IPV6]: Replace using the magic constant "1024" with IP6_RT_PRIO_USER for fc_metric.

This patch replaces the explicit usage of the magic constant "1024"
with IP6_RT_PRIO_USER in the IPV6 tree.

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agostarfire: secton fix
Andrew Morton [Sun, 10 Feb 2008 07:42:17 +0000 (23:42 -0800)]
starfire: secton fix

gcc-3.4.4 on powerpc:

drivers/net/starfire.c:219: error: version causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agovia-velocity: section fix
Andrew Morton [Sun, 10 Feb 2008 07:41:40 +0000 (23:41 -0800)]
via-velocity: section fix

From: Andrew Morton <akpm@linux-foundation.org>

gcc-3.4.4 on powerpc:

drivers/net/via-velocity.c:443: error: chip_info_table causes a section type conflict

on this one I had to remove the __devinitdata too.  Don't know why.

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agonatsemi: section fix
Andrew Morton [Sun, 10 Feb 2008 07:41:08 +0000 (23:41 -0800)]
natsemi: section fix

gcc-3.4.4 on powerpc:

drivers/net/natsemi.c:245: error: natsemi_pci_info causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agotyphoon: section fix
Andrew Morton [Sun, 10 Feb 2008 07:40:34 +0000 (23:40 -0800)]
typhoon: section fix

gcc-3.4.4 on powerpc:

drivers/net/typhoon.c:137: error: version causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86
Linus Torvalds [Sun, 10 Feb 2008 07:29:57 +0000 (23:29 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86

* git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: (32 commits)
  x86: cpa, strict range check in try_preserve_large_page()
  x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit
  x86: cpa, use page pool
  x86: introduce page pool in cpa
  x86: DEBUG_PAGEALLOC: enable after mem_init()
  brk: help text typo fix
  lguest: accept guest _PAGE_PWT page table entries
  x86 PM: update stale comments
  x86 PM: consolidate suspend and hibernation code
  x86 PM: rename 32-bit files in arch/x86/power
  x86 PM: move 64-bit hibernation files to arch/x86/power
  x86: trivial printk optimizations
  x86: fix early_ioremap pagetable ops
  x86: construct 32-bit boot time page tables in native format.
  x86, core: remove CONFIG_FORCED_INLINING
  x86: avoid unused variable warning in mm/init_64.c
  x86: fixup more paravirt fallout
  brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:
  x86: fix sparse warnings in acpi/bus.c
  x86: fix sparse warning in topology.c
  ...

16 years agoisdn: fix section mismatch warning for ISACVer
Sam Ravnborg [Sun, 10 Feb 2008 07:29:28 +0000 (23:29 -0800)]
isdn: fix section mismatch warning for ISACVer

Fix following warnings:
WARNING: drivers/isdn/hisax/built-in.o(.text+0x19723): Section mismatch in reference from the function ISACVersion() to the variable .devinit.data:ISACVer
WARNING: drivers/isdn/hisax/built-in.o(.text+0x2005b): Section mismatch in reference from the function setup_avm_a1_pcmcia() to the function .devinit.text:setup_isac()

ISACVer were only used from function annotated __devinit
so add same annotation to ISACVer.
One af the fererencing functions missed __devinit so add it
and kill an additional warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoisdn: fix section mismatch warnings from hisax_cs_setup_card
Sam Ravnborg [Sun, 10 Feb 2008 07:28:50 +0000 (23:28 -0800)]
isdn: fix section mismatch warnings from hisax_cs_setup_card

Fix the following warnings:
WARNING: drivers/isdn/hisax/built-in.o(.text+0x722): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_teles3()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x72c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_s0box()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x736): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_telespci()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x747): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_avm_pcipnp()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x74e): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_elsa()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x755): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_diva()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x75c): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sedlbauer()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x763): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_s()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x76a): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcpci()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x771): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_hfcsx()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x778): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_niccy()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x77f): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_bkm_a4t()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x786): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_sct_quadro()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x78d): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_gazel()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x794): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_w6692()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x79b): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_netjet_u()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x7a2): Section mismatch in reference from the function hisax_cs_setup_card() to the function .devinit.text:setup_enternow_pci()

checkcard() are the only user of hisax_cs_setup_card().
And checkcard is only used during init or when hot plugging
ISDN devices. So annotate hisax_cs_setup_card() with __devinit.
checkcard() is used by exported functions so it cannot be
annotated __devinit. Annotate it with __ref so modpost
ignore references to _devinit section.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sun, 10 Feb 2008 07:28:26 +0000 (23:28 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: (24 commits)
  [SPARC]: Add solaris/sunos binary support to feature removal schedule.
  [SPARC]: Merge asm-sparc{,64}/a.out.h
  [SPARC]: Merge asm-sparc{,64}/fb.h
  [SPARC]: Merge asm-sparc{,64}/errno.h
  [SPARC]: Merge asm-sparc{,64}/emergency-restart.h
  [SPARC]: Merge asm-sparc{,64}/div64.h
  [SPARC]: Merge asm-sparc{,64}/device.h
  [SPARC]: Merge asm-sparc{,64}/current.h
  [SPARC]: Merge asm-sparc{,64}/cputime.h
  [SPARC]: Merge asm-sparc{,64}/cache.h
  [SPARC]: Merge asm-sparc{,64}/byteorder.h
  [SPARC]: Merge asm-sparc{,64}/bugs.h
  [SPARC]: Merge asm-sparc{,64}/bug.h
  [SPARC]: Kill BSD errno translation table and header files.
  [SPARC]: Merge asm-sparc{,64}/bpp.h
  [SPARC]: Merge include/asm-sparc{,64}/auxvec.h
  [SPARC]: Merge include/asm-sparc{,64}/of_device.h
  [SPARC]: Merge include/asm-sparc{,64}/prom.h
  [SPARC]: Remove of_platform_device_create
  [SPARC64]: Add kretprobe support.
  ...

16 years agoisdn: fix section mismatch warnings in isac.c and isar.c
Sam Ravnborg [Sun, 10 Feb 2008 07:28:12 +0000 (23:28 -0800)]
isdn: fix section mismatch warnings in isac.c and isar.c

Fix the following warnings:
WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b276): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x1b286): Section mismatch in reference from the function inithscxisac() to the function .devinit.text:initisac()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x1fec7): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x21669): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x21671): Section mismatch in reference from the function AVM_card_msg() to the function .devinit.text:initisac()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x2991e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x29936): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisac()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x2993e): Section mismatch in reference from the function Sedl_card_msg() to the function .devinit.text:initisar()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e026): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x2e02e): Section mismatch in reference from the function NETjet_S_card_msg() to the function .devinit.text:initisac()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x37813): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:clear_pending_isac_ints()
WARNING: drivers/isdn/hisax/built-in.o(.text+0x37823): Section mismatch in reference from the function BKM_card_msg() to the function .devinit.text:initisac()

initisar(), initisac() and clear_pending_isac_ints()
were all used via a cardmsg fnction - which may be called
ouside __devinit context.
So remove the bogus __devinit annotation of the
above three functions to fix the warnings.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sun, 10 Feb 2008 07:28:01 +0000 (23:28 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add new "development flag" to the ext4 filesystem
  ext4: Don't panic in case of corrupt bitmap
  ext4: allocate struct ext4_allocation_context from a kmem cache
  JBD2:  Clear buffer_ordered flag for barried IO request on success
  ext4: Fix Direct I/O locking
  ext4: Fix circular locking dependency with migrate and rm.
  allow in-inode EAs on ext4 root inode
  ext4: Fix null bh pointer dereference in mballoc
  ext4: Don't set EXTENTS_FL flag for fast symlinks
  JBD2: Use the incompat macro for testing the incompat feature.
  jbd2: Fix reference counting on the journal commit block's buffer head
  [PATCH] jbd: Remove useless loop when writing commit record
  jbd2: Add error check to journal_wait_on_commit_record to avoid oops

16 years agoisdn: fix section mismatch warning in hfc_sx.c
Sam Ravnborg [Sun, 10 Feb 2008 07:27:41 +0000 (23:27 -0800)]
isdn: fix section mismatch warning in hfc_sx.c

Fix the following warning:
WARNING: drivers/isdn/hisax/built-in.o(.text+0x35818): Section mismatch in reference from the function hfcsx_card_msg() to the function .devinit.text:inithfcsx()

hfcsx_card_msg() may be called outside __devinit context.
Following the program logic is looks like the CARD_INIT branch
will only be taken under __devinit context but to be consistent
remove the __devinit annotation of inithfcsx() so we
do not mix non-__devinit and __devinit code.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agodrivers/media/video/em28xx/: Fix undefined symbol error with CONFIG_SND=N
S.Çağlar Onur [Sun, 10 Feb 2008 03:27:23 +0000 (05:27 +0200)]
drivers/media/video/em28xx/: Fix undefined symbol error with CONFIG_SND=N

Without this you get undefined symbol errors with CONFIG_SND=N:

  ERROR: "snd_pcm_period_elapsed" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_hw_constraint_integer" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_set_ops" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_lib_ioctl" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_free" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_card_register" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!
  ERROR: "snd_pcm_new" [drivers/media/video/em28xx/em28xx-alsa.ko] undefined!

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoUpdate kernel/.gitignore with new auto-generated files
S.Çağlar Onur [Sun, 10 Feb 2008 03:19:03 +0000 (05:19 +0200)]
Update kernel/.gitignore with new auto-generated files

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agoUpdate arch/x86/boot/.gitignore with new auto-generated files
S.Çağlar Onur [Sun, 10 Feb 2008 03:18:08 +0000 (05:18 +0200)]
Update arch/x86/boot/.gitignore with new auto-generated files

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agortc-r9701.c: silence compiler warning
S.Çağlar Onur [Sun, 10 Feb 2008 03:10:48 +0000 (05:10 +0200)]
rtc-r9701.c: silence compiler warning

Commit 75b6102257874a4ea796af686de2f72cfa0452f9 ("rtc: add support for
Epson RTC-9701JE V4") introduced the warning

  drivers/rtc/rtc-r9701.c: In function `r9701_get_datetime':
  drivers/rtc/rtc-r9701.c:74: warning: unused variable `time'

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agox25_asy.c: silence compiler warning
S.Çağlar Onur [Sun, 10 Feb 2008 03:06:25 +0000 (05:06 +0200)]
x25_asy.c: silence compiler warning

Commit 11b0cc3a4af65413ca3bb5698769e091486e0b22 ("x25_asy: Fix ref count
rule violation") introduced the warning

  drivers/net/wan/x25_asy.c: In function `x25_asy_open_tty':
  drivers/net/wan/x25_asy.c:557: warning: unused variable `ld'

Signed-off-by: S.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years ago[PKT_SCHED] ematch: tcf_em_destroy robustness
Stephen Hemminger [Sun, 10 Feb 2008 07:26:53 +0000 (23:26 -0800)]
[PKT_SCHED] ematch: tcf_em_destroy robustness

Make the code in tcf_em_tree_destroy more robust and cleaner:
 * Don't need to cast pointer to kfree() or avoid passing NULL.
 * After freeing the tree, clear the pointer to avoid possible problems
from repeated free.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[PKT_SCHED]: deinline functions in meta match
Stephen Hemminger [Sun, 10 Feb 2008 07:26:17 +0000 (23:26 -0800)]
[PKT_SCHED]: deinline functions in meta match

A couple of functions in meta match don't need to be inline.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Convert sctp_dbg_objcnt to seq files.
Pavel Emelyanov [Sun, 10 Feb 2008 07:24:58 +0000 (23:24 -0800)]
[SCTP]: Convert sctp_dbg_objcnt to seq files.

This makes the code use a good proc API and the text ~50 bytes shorter.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SCTP]: Use snmp_fold_field instead of a homebrew analogue.
Pavel Emelyanov [Sun, 10 Feb 2008 07:23:44 +0000 (23:23 -0800)]
[SCTP]: Use snmp_fold_field instead of a homebrew analogue.

SCPT already depends in INET, so this doesn't create additional
dependencies.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[IGMP]: Optimize kfree_skb in igmp_rcv.
Denis V. Lunev [Sun, 10 Feb 2008 07:22:26 +0000 (23:22 -0800)]
[IGMP]: Optimize kfree_skb in igmp_rcv.

Merge error paths inside igmp_rcv.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[KEY]: Convert net/pfkey to use seq files.
Pavel Emelyanov [Sun, 10 Feb 2008 07:20:06 +0000 (23:20 -0800)]
[KEY]: Convert net/pfkey to use seq files.

The seq files API disposes the caller of the difficulty of
checking file position, the length of data to produce and
the size of provided buffer.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[KEY]: Clean up proc files creation a bit.
Pavel Emelyanov [Sun, 10 Feb 2008 07:19:14 +0000 (23:19 -0800)]
[KEY]: Clean up proc files creation a bit.

Mainly this removes ifdef-s from inside the ipsec_pfkey_init.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agopppol2tp: fix printk warnings
Andrew Morton [Sun, 10 Feb 2008 07:17:51 +0000 (23:17 -0800)]
pppol2tp: fix printk warnings

drivers/net/pppol2tp.c: In function `pppol2tp_seq_tunnel_show':
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 4)
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 5)
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 6)
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 7)
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 8)
drivers/net/pppol2tp.c:2295: warning: long long unsigned int format, __u64 arg (arg 9)
drivers/net/pppol2tp.c: In function `pppol2tp_seq_session_show':
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 5)
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 6)
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 7)
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 8)
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 9)
drivers/net/pppol2tp.c:2328: warning: long long unsigned int format, __u64 arg (arg 10)

Not all platforms implement u64 with unsigned long long.  eg: powerpc.

Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2: section fix
Andrew Morton [Sun, 10 Feb 2008 07:17:15 +0000 (23:17 -0800)]
bnx2: section fix

gcc-3.4.4 on powerpc:

drivers/net/bnx2.c:67: error: version causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agobnx2x: section fix
Andrew Morton [Sun, 10 Feb 2008 07:16:41 +0000 (23:16 -0800)]
bnx2x: section fix

From: Andrew Morton <akpm@linux-foundation.org>

gcc-3.4.4 on powerpc:

drivers/net/bnx2x.c:73: error: version causes a section type conflict

Cc: Jeff Garzik <jeff@garzik.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SPARC]: Add solaris/sunos binary support to feature removal schedule.
David S. Miller [Sun, 10 Feb 2008 07:08:53 +0000 (23:08 -0800)]
[SPARC]: Add solaris/sunos binary support to feature removal schedule.

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years ago[SPARC]: Merge asm-sparc{,64}/a.out.h
David S. Miller [Sun, 10 Feb 2008 06:25:50 +0000 (22:25 -0800)]
[SPARC]: Merge asm-sparc{,64}/a.out.h

Signed-off-by: David S. Miller <davem@davemloft.net>
16 years agoext4: Add new "development flag" to the ext4 filesystem
Theodore Tso [Sun, 10 Feb 2008 06:11:44 +0000 (01:11 -0500)]
ext4: Add new "development flag" to the ext4 filesystem

This flag is simply a generic "this is a crash/burn test filesystem"
marker.  If it is set, then filesystem code which is "in development"
will be allowed to mount the filesystem.  Filesystem code which is not
considered ready for prime-time will check for this flag, and if it is
not set, it will refuse to touch the filesystem.

As we start rolling ext4 out to distro's like Fedora, et. al, this makes
it less likely that a user might accidentally start using ext4 on a
production filesystem; a bad thing, since that will essentially make it
be unfsckable until e2fsprogs catches up.

Signed-off-by: Theodore Tso <tytso@MIT.EDU>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
16 years agoext4: Don't panic in case of corrupt bitmap
Aneesh Kumar K.V [Sun, 10 Feb 2008 06:10:04 +0000 (01:10 -0500)]
ext4: Don't panic in case of corrupt bitmap

Multiblock allocator calls BUG_ON in many case if the free and used
blocks count obtained looking at the bitmap is different from what
the allocator internally accounted for. Use ext4_error in such case
and don't panic the system.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: allocate struct ext4_allocation_context from a kmem cache
Eric Sandeen [Sun, 10 Feb 2008 06:13:33 +0000 (01:13 -0500)]
ext4: allocate struct ext4_allocation_context from a kmem cache

struct ext4_allocation_context is rather large, and this bloats
the stack of many functions which use it.  Allocating it from
a named slab cache will alleviate this.

For example, with this change (on top of the noinline patch sent earlier):

-ext4_mb_new_blocks 200
+ext4_mb_new_blocks  40

-ext4_mb_free_blocks 344
+ext4_mb_free_blocks 168

-ext4_mb_release_inode_pa 216
+ext4_mb_release_inode_pa  40

-ext4_mb_release_group_pa 192
+ext4_mb_release_group_pa  24

Most of these stack-allocated structs are actually used only for
mballoc history; and in those cases often a smaller struct would do.
So changing that may be another way around it, at least for those
functions, if preferred.  For now, in those cases where the ac
is only for history, an allocation failure simply skips the history
recording, and does not cause any other failures.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoJBD2: Clear buffer_ordered flag for barried IO request on success
Dave Kleikamp [Sun, 10 Feb 2008 06:09:32 +0000 (01:09 -0500)]
JBD2:  Clear buffer_ordered flag for barried IO request on success

In JBD2 jbd2_journal_write_commit_record(), clear the buffer_ordered
flag for the bh after barried IO has succeed. This prevents later, if
the same buffer head were submitted to the underlying device, which has
been reconfigured to not support barrier request, the JBD2 commit code
could treat it as a normal IO (without barrier).

This is a port from JBD/ext3 fix from Neil Brown.

More details from Neil:

Some devices - notably dm and md - can change their behaviour in
response to BIO_RW_BARRIER requests.  They might start out accepting
such requests but on reconfiguration, they find out that they cannot
any more. JBD2 deal with this by always testing if BIO_RW_BARRIER
requests fail with EOPNOTSUPP, and retrying the write
requests without the barrier (probably after waiting for any pending
writes to complete).

However there is a bug in the handling this in JBD2 for ext4 .

When ext4/JBD2 to submit a BIO_RW_BARRIER request,
it sets the buffer_ordered flag on the buffer head.
If the request completes successfully, the flag STAYS SET.

Other code might then write the same buffer_head after the device has
been reconfigured to not accept barriers.  This write will then fail,
but the "other code" is not ready to handle EOPNOTSUPP errors and the
error will be treated as fatal.

Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Fix Direct I/O locking
Jan Kara [Sun, 10 Feb 2008 06:08:38 +0000 (01:08 -0500)]
ext4: Fix Direct I/O locking

We cannot start transaction in ext4_direct_IO() and just let it last
during the whole write because dio_get_page() acquires mmap_sem which
ranks above transaction start (e.g. because we have dependency chain
mmap_sem->PageLock->journal_start, or because we update atime while
holding mmap_sem) and thus deadlocks could happen. We solve the problem
by starting a transaction separately for each ext4_get_block() call.

We *could* have a problem that we allocate a block and before its data
are written out the machine crashes and thus we expose stale data. But
that does not happen because for hole-filling generic code falls back to
buffered writes and for file extension, we add inode to orphan list and
thus in case of crash, journal replay will truncate inode back to the
original size.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoext4: Fix circular locking dependency with migrate and rm.
Aneesh Kumar K.V [Sun, 10 Feb 2008 06:20:05 +0000 (01:20 -0500)]
ext4: Fix circular locking dependency with migrate and rm.

In order to prevent a circular locking dependency when an unlink
operation is racing with an ext4 migration, we delay taking i_data_sem
until just before switch the inode format, and use i_mutex to prevent
writes and truncates during the first part of the migration operation.

Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
16 years agoMerge branches 'master', 'omap1-upstream' and 'orion' into devel
Russell King [Sat, 9 Feb 2008 22:47:23 +0000 (22:47 +0000)]
Merge branches 'master', 'omap1-upstream' and 'orion' into devel

* master:
  [ARM] constify function pointer tables
  [ARM] 4823/1: AT91 section fix
  [ARM] 4824/1: pxa: clear RDH bit after any reset
  [ARM] pxa: remove debugging PM: printk

* omap1-upstream:
  ARM: OMAP1: Misc clean-up
  ARM: OMAP1: Update defconfigs for omap1
  ARM: OMAP1: Palm Tungsten E board clean-up
  ARM: OMAP1: Use I2C bus registration helper for omap1
  ARM: OMAP1: Remove omap_sram_idle()
  ARM: OMAP1: PM fixes for OMAP1
  ARM: OMAP1: Use MMC multislot structures for Siemens SX1 board
  ARM: OMAP1: Make omap1 use MMC multislot structures
  ARM: OMAP1: Change the comments to C style
  ARM: OMAP1: Make omap1 boards to use omap_nand_platform_data
  ARM: OMAP: Add helper module for board specific I2C bus registration
  ARM: OMAP: Add dmtimer support for OMAP3
  ARM: OMAP: Pre-3430 clean-up for dmtimer.c
  ARM: OMAP: Add DMA support for chaining and 3430
  ARM: OMAP: Add 24xx GPIO debounce support
  ARM: OMAP: Get rid of unnecessary ifdefs in GPIO code
  ARM: OMAP: Add 3430 gpio support
  ARM: OMAP: Add 3430 CPU identification macros
  ARM: OMAP: Request DSP memory for McBSP

* orion:
  [ARM] Orion: Use the sata_mv driver for the TS-209 SATA
  [ARM] Orion: Use the sata_mv driver for the Kurobox SATA
  [ARM] Orion: free up kernel virtual address space
  [ARM] Orion: distinguish between physical and virtual addresses
  [ARM] Orion: kill orion_early_putstr()
  [ARM] Orion: update defconfig
  [ARM] Orion: Use the sata_mv driver for the integrated SATA controller

16 years ago[ARM] constify function pointer tables
Jan Engelhardt [Tue, 22 Jan 2008 19:41:07 +0000 (20:41 +0100)]
[ARM] constify function pointer tables

Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4823/1: AT91 section fix
David Brownell [Wed, 6 Feb 2008 21:03:42 +0000 (22:03 +0100)]
[ARM] 4823/1: AT91 section fix

Fix section warning:

 WARNING: arch/arm/mach-at91/built-in.o(.text+0xd74): Section mismatch in reference
        from the function init_programmable_clock()
        to the function .init.text:at91_css_to_clk()
 The function  init_programmable_clock() references
 the function __init at91_css_to_clk().
 This is often because init_programmable_clock lacks a __init
 annotation or the annotation of at91_css_to_clk is wrong.

In this case the only calls to and from init_programmable_clock()
are from code marked as "__init", so this fix is trivially correct.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Uwe Kleine-Knig <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years ago[ARM] 4824/1: pxa: clear RDH bit after any reset
Dmitry Krivoschekov [Fri, 8 Feb 2008 14:02:03 +0000 (15:02 +0100)]
[ARM] 4824/1: pxa: clear RDH bit after any reset

According to PXA300/310 and PXA320 Developer manuals,
the ASCR[RDH] "bit needs to be cleared as part of the software
initialization coming out of any reset and coming out of D3".
The latter requirement is addressed by commit
"c4d1fb627ff3072", as for the former (coming out of any reset),
the kernel relies on boot loaders and assumes that RDH bit
is cleared there. Though, not all bootloaders follow the rule
so we have to clear the bit in kernel.

We clear the RDH bit in pxa3xx_init() function since
it is always invoked after any reset. We also preserve D1S, D2S
and D3S bits from being cleared in case we invoke pxa3xx_init()
function not from normal hardware reset (e.g. kexec scenario),
so these bits can be properly referenced later.

Signed-off-by: Dmitry Krivoschekov <dmitry.krivoschekov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agox86: cpa, strict range check in try_preserve_large_page()
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: cpa, strict range check in try_preserve_large_page()

Right now, we check only the first 4k page for static required protections.
This does not take overlapping regions into account. So we might end up
setting the wrong permissions/protections for other parts of this large page.

This can be optimized further, but correctness is the important part.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: cpa, enable CONFIG_DEBUG_PAGEALLOC on 64-bit

Now, that the page pool is in place we can enable DEBUG_PAGEALLOC on
64bit.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: cpa, use page pool
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: cpa, use page pool

Switch the split page code to use the page pool. We do this
unconditionally to avoid different behaviour with and without
DEBUG_PAGEALLOC enabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: introduce page pool in cpa
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: introduce page pool in cpa

DEBUG_PAGEALLOC was not possible on 64-bit due to its early-bootup
hardcoded reliance on PSE pages, and the unrobustness of the runtime
splitup of large pages. The splitup ended in recursive calls to
alloc_pages() when a page for a pte split was requested.

Avoid the recursion with a preallocated page pool, which is used to
split up large mappings and gets refilled in the return path of
kernel_map_pages after the split has been done. The size of the page
pool is adjusted to the available memory.

This part just implements the page pool and the initialization w/o
using it yet.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: DEBUG_PAGEALLOC: enable after mem_init()
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: DEBUG_PAGEALLOC: enable after mem_init()

DEBUG_PAGEALLOC must not be enabled before mem_init(). Before this
point there is nothing to allocate.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agobrk: help text typo fix
Ingo Molnar [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
brk: help text typo fix

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agolguest: accept guest _PAGE_PWT page table entries
Ahmed S. Darwish [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
lguest: accept guest _PAGE_PWT page table entries

Beginning from commit 4138cc3418f5, ioremap_nocache() sets the _PAGE_PWT
flag.

Lguest doesn't accept a guest pte with a _PWT flag and reports a "bad
page table entry" in that case.

Accept guest _PAGE_PWT page table entries.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 PM: update stale comments
Rafael J. Wysocki [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86 PM: update stale comments

In some suspend and hibernation files in arch/x86/power there are
comments referring to arch/x86-64 and arch/i386 .  Update them to
reflect the current code layout.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 PM: consolidate suspend and hibernation code
Rafael J. Wysocki [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86 PM: consolidate suspend and hibernation code

Move the hibernation-specific code from arch/x86/power/suspend_64.c
to a separate file (hibernate_64.c) and the CPU-handling code to
cpu_64.c (in line with the corresponding 32-bit code).

Simplify arch/x86/power/Makefile .

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 PM: rename 32-bit files in arch/x86/power
Rafael J. Wysocki [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86 PM: rename 32-bit files in arch/x86/power

Rename cpu.c, suspend.c and swsusp.S in arch/x86/power to cpu_32.c,
hibernate_32.c and hibernate_asm_32.S, respectively, and update the
purpose and copyright information in these files.

Update the Makefile in arch/x86/power to reflect the above changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86 PM: move 64-bit hibernation files to arch/x86/power
Rafael J. Wysocki [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86 PM: move 64-bit hibernation files to arch/x86/power

Move arch/x86/kernel/suspend_64.c to arch/x86/power .

Move arch/x86/kernel/suspend_asm_64.S to arch/x86/power
as hibernate_asm_64.S .

Update purpose and copyright information in
arch/x86/power/suspend_64.c and
arch/x86/power/hibernate_asm_64.S .

Update the Makefiles in arch/x86, arch/x86/kernel and
arch/x86/power to reflect the above changes.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: trivial printk optimizations
Denys Vlasenko [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: trivial printk optimizations

In arch/x86/boot/printf.c gets rid of unused tail of digits: const char
*digits = "0123456789abcdefghijklmnopqrstuvwxyz"; (we are using 0-9a-f
only)

Uses smaller/faster lowercasing (by ORing with 0x20)
if we know that we work on numbers/digits. Makes
strtoul smaller, and also we are getting rid of

  static const char small_digits[] = "0123456789abcdefx";
  static const char large_digits[] = "0123456789ABCDEFX";

since this works equally well:

  static const char digits[16] = "0123456789ABCDEF";

Size savings:

$ size vmlinux.org vmlinux
   text    data     bss     dec     hex filename
 877320  112252   90112 1079684  107984 vmlinux.org
 877048  112252   90112 1079412  107874 vmlinux

It may be also a tiny bit faster because code has less
branches now, but I doubt it is measurable.

[ hugh@veritas.com: uppercase pointers fix ]

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix early_ioremap pagetable ops
Ian Campbell [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: fix early_ioremap pagetable ops

Some important parts of f6df72e71eba621b2f5c49b3a763116fac748f6e got
dropped along the way, reintroduce them.

Only affects paravirt guests.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: construct 32-bit boot time page tables in native format.
Ian Campbell [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: construct 32-bit boot time page tables in native format.

Specifically the boot time page tables in a CONFIG_X86_PAE=y enabled
kernel are in PAE format.

early_ioremap is updated to use the standard page table accessors.

Clear any mappings beyond max_low_pfn from the boot page tables in
native_pagetable_setup_start because the initial mappings can extend
beyond the range of physical memory and into the vmalloc area.

Derived from patches by Eric Biederman and H. Peter Anvin.

[ jeremy@goop.org: PAE swapper_pg_dir needs to be page-sized fix ]

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Mika PenttilÃ\83¤ <mika.penttila@kolumbus.fi>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86, core: remove CONFIG_FORCED_INLINING
Harvey Harrison [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86, core: remove CONFIG_FORCED_INLINING

Other than the defconfigs, remove the entry in compiler-gcc4.h,
Kconfig.debug and feature-removal-schedule.txt.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: avoid unused variable warning in mm/init_64.c
Thomas Gleixner [Sat, 9 Feb 2008 22:24:09 +0000 (23:24 +0100)]
x86: avoid unused variable warning in mm/init_64.c

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
16 years agox86: fixup more paravirt fallout
Ingo Molnar [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: fixup more paravirt fallout

Use a common irq_return entry point for all the iret places, which
need the paravirt INTERRUPT return wrapper.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agobrk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:
Jiri Kosina [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
brk: document randomize_va_space and CONFIG_COMPAT_BRK (was Re:

Document randomize_va_space and CONFIG_COMPAT_BRK.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix sparse warnings in acpi/bus.c
Harvey Harrison [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: fix sparse warnings in acpi/bus.c

Add function definition and extern variables to asm-x86/acpi.h.

All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are
only added to the x86 include headers.  boot.c already includes acpi.h
so no changes are needed there.

Fixes the following:
arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static?
arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix sparse warning in topology.c
Harvey Harrison [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: fix sparse warning in topology.c

arch/x86/kernel/topology.c:56:2: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: sparse warnings in pageattr.c
Harvey Harrison [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: sparse warnings in pageattr.c

Adjust the definition of lookup_address to take an unsigned long
level argument.  Adjust callers in xen/mmu.c that pass in a
dummy variable.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: sparse warning in therm_throt.c
Harvey Harrison [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: sparse warning in therm_throt.c

arch/x86/kernel/cpu/mcheck/therm_throt.c:121:2: warning: returning void-valued expression

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: fix sparse warning in xen/time.c
Harvey Harrison [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: fix sparse warning in xen/time.c

Use xen_khz to denote xen_specific clock speed.  Avoid shadowing
cpu_khz.

arch/x86/xen/time.c:220:6: warning: symbol 'cpu_khz' shadows an earlier one
include/asm/tsc.h:17:21: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: fix typo in printk in mfgpt_timer_setup
Arnd Hannemann [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: fix typo in printk in mfgpt_timer_setup

Signed-off-by: Arnd Hannemann <hannemann@i4.informatik.rwth-aachen.de>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: make sure the right MFGPT timer fired the timer tick
Jordan Crouse [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: make sure the right MFGPT timer fired the timer tick

Each AMD Geode MFGPT timer interrupt output is paired with another
timer; esentially the interrupt goes if either timer fires.  This
is okay, but the handlers need to be aware of this.  Make sure in
the timer tick handler that our timer really did expire.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: fix a potential race when disabling a timer
Andres Salomon [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: fix a potential race when disabling a timer

We *really* don't want to be reading MFGPTx_SETUP and writing back those
values.  What we want to be doing is clearing CMP1 and CMP2 unconditionally;
otherwise, we have races where CMP1 and/or CMP2 fire after we've read
MFGPTx_SETUP.  They can also fire between when we've written ~CNTEN to
the register, and when the new register values get copied to the timer's
version of the register.  By clearing both fields, we're okay.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: Use "just-in-time" detection for the MFGPT timers
Jordan Crouse [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: Use "just-in-time" detection for the MFGPT timers

There isn't much value to always detecting the MFGPT timers on
Geode platforms; detection is only needed when something wants
to use the timers.  Move the detection code so that it gets
called the first time a timer is allocated.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: make mfgpt_timer_setup available outside of mfgpt_32.c
Andres Salomon [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: make mfgpt_timer_setup available outside of mfgpt_32.c

We need to be called from elsewhere, and this gets some #ifdefs out
of the .c file.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: replace 'flags' field with 'avail' bit
Andres Salomon [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: replace 'flags' field with 'avail' bit

Drop F_AVAIL and the 'flags' field, replacing with an 'avail' bit.  This
looks more understandable to me.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: drop module owner usage from MFGPT API
Andres Salomon [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: drop module owner usage from MFGPT API

We had planned to use the 'owner' field for allowing re-allocation of
MFGPTs; however, doing it by module owner name isn't flexible enough.  So,
drop this for now.  If it turns out that we need timers in modules, we'll
need to come up with a scheme that matches the write-once fields of the
MFGPTx_SETUP register, and drops ponies from the sky.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE fix MFGPT input clock value
Willy Tarreau [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE fix MFGPT input clock value

The GEODE MFGPT code assumed that 32kHz was 32000 Hz while the boards
run on a 32.768 kHz digital watch crystal. In practise, it will not
change the timer's frequency as the skew was only 2.4%, but it
should provide more accurate intervals.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years agox86: GEODE: MFGPT: Minor cleanups
Andres Salomon [Sat, 9 Feb 2008 22:24:08 +0000 (23:24 +0100)]
x86: GEODE: MFGPT: Minor cleanups

- uninline timer functions; the compiler knows better than we do
  whether or not to inline these.
- mfgpt_start_timer() had an unused 'clock' argument, drop it.

From both Jordan and myself.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
16 years ago[ARM] pxa: remove debugging PM: printk
Russell King [Thu, 7 Feb 2008 20:17:53 +0000 (20:17 +0000)]
[ARM] pxa: remove debugging PM: printk

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
16 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sat, 9 Feb 2008 19:15:23 +0000 (11:15 -0800)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] dynamic page tables.
  [S390] Add four level page tables for CONFIG_64BIT=y.
  [S390] 1K/2K page table pages.
  [S390] Remove a.out header file.
  [S390] sclp_vt220: Fix vt220 initialization
  [S390] qdio: avoid hang when establishing qdio queues
  [S390] VMEM_MAX_PHYS overflow on 31 bit.
  [S390] zcrypt: Do not start ap poll thread per default
  [S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly.
  [S390] Wire up new timerfd syscalls.
  [S390] Update default configuration.

16 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Sat, 9 Feb 2008 19:14:20 +0000 (11:14 -0800)]
Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild:
  Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit>
  ide: introduce HAVE_IDE
  kbuild: silence CHK/UPD messages according to $(quiet)
  scsi: fix makefile for aic7(3*x)
  kbuild/modpost: Use warn() for announcing section mismatches
  Add binoffset to gitignore
  kbuild/modpost: improve warnings if symbol is unknown

16 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sat, 9 Feb 2008 19:12:31 +0000 (11:12 -0800)]
Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Merge branches 'release' and 'buildfix' into release
  acer-wmi - Add documentation
  sonypi - Move sonypi.txt to Documentation/laptops
  sony-laptop - Move sony-laptop.txt to Documentation/laptops
  thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptops
  Documentation - Create laptops sub-directory
  ACPI: thermal: buildfix for CONFIG_THERMAL=n
  cpuidle: build fix for non-x86
  acer-wmi: Fix backlight on AMW0 (V1) laptops
  tc1100-wmi: Mark as experimental
  ACPI: SBS: Host controller must initialize before SBS.

16 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Sat, 9 Feb 2008 19:12:15 +0000 (11:12 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: extend ricoh_mmc to support Ricoh RL5c476
  at91_mci: use generic GPIO calls
  sdhci: add num index for multi controllers case
  MAINTAINERS: remove non-existant URLs
  mmc: remove sdhci and mmc_spi experimental markers
  mmc: Handle suspend/resume in Ricoh MMC disabler

16 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Sat, 9 Feb 2008 19:11:45 +0000 (11:11 -0800)]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] cs553x_nand: command line partitioning support

16 years agomemstick: initial commit for Sony MemoryStick support
Alex Dubov [Sat, 9 Feb 2008 18:20:54 +0000 (10:20 -0800)]
memstick: initial commit for Sony MemoryStick support

Sony MemoryStick cards are used in many products manufactured by Sony.
They are available both as storage and as IO expansion cards.  Currently,
only MemoryStick Pro storage cards are supported via TI FlashMedia
MemoryStick interface.

[mboton@gmail.com: biuld fix]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Alex Dubov <oakad@yahoo.com>
Signed-off-by: Miguel Boton <mboton@gmail.co>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 years agom68knommu: add pgtable_t
Martin Schwidefsky [Sat, 9 Feb 2008 11:11:21 +0000 (03:11 -0800)]
m68knommu: add pgtable_t

  CC      init/main.o
In file included from include2/asm/uaccess.h:8,
                 from include/linux/poll.h:13,
                 from include/linux/rtc.h:113,
                 from include/linux/efi.h:19,
                 from linux-2.6/init/main.c:43:
include/linux/mm.h:1151:
error: expected declaration specifiers or '...' before 'pgtable_t'

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reported-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>